Parting out my long action and wanting to trade for a SA CDG, or another AW cut Short action with similar specs.

This action has under 100 rounds of 6.5 PRC on it. I just don't see myself using any long action cartridges regularly.

ARC Coup de Grace Long Action
Magnum Bolt face
20moa
pivoting bolt handle, Hourglass Knob Black
newer version mag cut, takes AICS CIP & Hawkins hunter LA mags

Looking to order a PVA prefit to replace a bartlein at the end of the year on my match gun. Undecided on getting another bartlein and waiting, and shipping and waiting or just ordering a PVA prefit. Looking to hear experience, good, bad, ugly. Specifically likely going with a 6.5cm 7.5twist shouldered for a tikka.

Let me know your experience.

Looking to buy a Kestrel 5700 Elite AB + Link

Greyboe Ridgeback in a Remington 700 SA. I got it on a trade. Included Greyboe Bottom metal. IT WILL NEED ATTENTION TO THE RECOIL CHANNEL! It could probably be bedded and would fix it but I’m not going to mess with it. Barrel channel has been opened up to accept a larger barrel. $350

Tape is only on there to hold action screws from being lost.

Leupold MK4hd 6-24x52 in a pr2 mil reticle. No box. But I do have the Allen key for the zero stop I will include. $old

I’ve also got an Area 419 1.26” 34mm mount with a diving board and bubble level if you wanted a package deal.

Manners NIGHT STALKER
Rem 700 & Clones SHORT Action Inlet
Proof Sendero Barrel Channel Inlet
Micro Chassis (for M5 bottom metal)
2 Flush Cups Left Side

I did not place my order with the EFR as the majority of people I know use a thermal scope and not a clip-on. This can be purchased from Manners for $150 if you want to run a clip-on

$1600 shipped

1 - SOLD
2 - ELITE DISCO TOMMY BAHAMA
3 - SOLD


SOLD

Manners CS1
Rem 700 & Clones Short Action Inlet
Proof Sendero Barrel Channel Inlet
MCS Micro Chassis for M5 Bottom Metal
2 Flush Cups Left Side

$1300 SHIPPED FIRM

1 - ELITE BLUE ON BLACK
2 - ELITE BACK N BLACK
3 - SOLD
4 - ELITE CUSTOM RED & GREY
5 - ELITE SWAMP

BNIB Gray ops CNC mini plate pro. These attach right to a shooting bag or can be used independently. I’ve got another plate with the bag installed, need to clear out the extra gear I’ve got.

Asking $225 shipped obo


Specs:
Weight saving cuts for extreme lightweight design (10 oz without brass weights)

With Brass Weights added to the Mini Plate PRO, total plate weight is 24 oz.
(Plate is shipped with 2 brass weights installed)
Length: 6.75″
Width: 5.50″

Howdy all,

Well, I bought a nice used rifle that was built by Accurate Ordnance LLC, on a Badger 2013 action, with a 6mm Creedmoor Rock Creek Barrel, in a AICS AX stock. I want to see if any of the former employees are floating around here on the Hide? (I heard they closed.) More specifically, I wonder if any of the guys retained records of their builds, in case someone like me wants to ask them if they could re-barrel it for me? Question: if they have the original specs of the build, could they make me a pre-fit barrel? New to this game, appreciate the info.

If anything, does anybody know of a good shop that could re-barrel my rifle in the West Virginia/Northern Virginia area??

Who's got a few boxes of 6MM Creedmoor, by the way!? I should have scope and rings by this weekend-I am dying to shoot this thing!

Thanks!

Brand new, Sons of Liberty Gun Works 12.5” 5.56 complete upper. Sage Dynamics edition. Comes with QD mount and Railscales furniture.

$650 shipped.

Salty 200P model (200mw), works great. Takes AA batteries. Video

$1000 shipped

*Have one in great condition for more if interested

Like new SB PMll 3-20x50. Original box and contents.
$2550.00 shipped
Will trade for NF AtacR 7-35x56 second focal only.

I have a complete JP LMOS bolt carrier for small frame with firing pin and enhanced bolt in stainless steel with QPQ finish, asking $275.00 shipped

Now if only there were crayons involved…

Sirhr

Used but VGC. Cutting back on 22LR BDC scopes. Was on my 10/22.

$110 delivered. Venmo or Zelle please

• Brand
  Athlon Optics
• Color
  Black
• Style
  BDC22 RIMFIRE
• Sport
  Hunting
• Item Weight
  16 ounces
• Material
  Aluminum
• Fully Multicoated optics effectively reduces reflected light and increases the transmission of light giving you a brighter image than normal single coated lenses
• Heat treated one piece tube gives the scope extra strength over multi-piece tubes. A one piece tube also is better at keeping moisture out thus keeping your scope fog proof for the life of the product
• Aircraft Grade Aluminum provide extra strength and durability to handle the toughest terrain and offers lifetime of use.
• Waterproof to protect the scope in the harshest weather conditions or if accidentally submerged underwater
• Robust mechanical system with special designs on both control and erector system that give you the ultimate recoil resistance to withstand 1000G recoil for 1000 times.

The barrel has 20 rounds through it. It is a little too light for me, so I went with a 30" Heavy Varmint.
$700 Shipped TYD

Rem/Ages Remington 700 Prefit Barrel
Barrel Steel: 416R Stainless Steel
Contoured Barrel Length: 29 (No 1/2"x28 Threads) [+$45.00]
Caliber & Twist Rate: .300/.308 Cal 1:10 Twist 5R Groove
Bolt Action Contour: 30 - M24 / M40 1.062 3 .900
Rifle Chambers: .300 Win Mag
Rem/Ages CounterBore Size: .700" - Standard (Fits Remington
Factory Bolt)
Muzzle Options: 5/8"x24 Threads (.243-.358), Requires Min
.670" Muzzle Dia. (Contour #5 or larger) [+$55.00]
Bolt Action Fluting: Straight 6 Flute [+$120.00]
Engraving: No Engraving
Finish: Polish

Kahles 30% MAP cert, saves $1300-1400 on K328i or K540i.

$650

I have a like new nighthawk t3 that has less than 250 rounds through it comes with original case and 1 mag $2800 shipped

This x tactical professional is like new in box less than 250 rounds though it and comes with original case and 1 mag $2800

This les Baer stinger is in breat shape just have to sell to pay some bills $2250 shipped and in 45 acp

Its a like new nighthawk t4 comes with 2 mags and the bag its a 9mm and less than 500 rounds through it $2500 shipped

Going to update this thread with random odds and ends for sale. Can accept Zelle / Apple Pay / Cashapp. ALL PRICES INCLUDE FREE SHIP.

Knights Armament USMC 600 meter micro rear iron sight s- $SOLD


Wilcox RulR mounts. These replace the top cap on any 30mm Night Force ultralite ring. They can be used to mount range finders, red dots, etc. Often seen on Devgru guns. Have three variants of them. Big logo / small logo / no logo - You pick - $225 shipped


Knights Armament low pro gas blocks - These are surplus recce gas blocks. They are older stock and have different finishing than the more recent gas blocks that Knights produced until a few years ago. If doing a NSW Recce rifle this is the gas block you want. $175 shipped.

Great glass but sits in safe. I'll have to remove my initials off it...comes with carry bag and tract harness....like to get 450 sent

Very lightly used chassis. Comes with factory mag and other items from factory...purchased the bridge separately later on...luky u....wanting 500+ send fee

I recently designed an endcap adapter that will allow mounting of any 5/8-24 muzzle brake to the front of an Omega 300 suppressor. I had it machined from 416 stainless and it turned out pretty awesome. Because of the long lead times for the X factor front brakes, I am considering doing a bulk purchase and wanted to see if anyone would be interested. Example area 419 brake mounted photo attached. I will need to dial in the thread length a little better, but overall, it looks like it will work well.