Brand new Kestrel 5700 Elite with Link. $old

I have an older Seekins SP10 with the rifle length gas system. It has a .750 gas block. I know the newer SP10s have a longer gas system now, +1.5 I think. Is the barrel contour still the same? Are there any commercial SP10s that utilize a thicker barrel and the .875 gas block? Or, is that just for the SP10M?

Hi guys. New to the site from Arkansas. Currently building my first custom rifle and trying learn as I go. Looking to pick up any advice as I get into longer range shooting. Thanks for the add.

Shoot me a PM please if you have one available or know where to find one in stock. Thanks!

I have a 27” Krieger HV 1-7.5tw barrel chambered in 6 dasher with an alpha .104 fb reamer by Joe walls of walls rifles for an IMPACT 737 action, 5/8x24 muzzle. Cerakoted black. Joe does awesome work and his barrels are always top notch and super accurate with very clean machine work. Just changing contours. Never screwed on an action. $600 firm. PayPal f&f only.

I am a gun enthusiast. Thank you

I'll start. Classic oldies for me.

Login to view embedded media

Is magnification between brands always equal? As in 15x is 15x regardless of brand or magnification range?

I think so, but maybe my eyes are playing tricks on me…

Had two top tier scopes side by side for several hours today, and at equal mag the image in one is smaller than in the other, meaning the actual target appears much smaller… obviously they both milled equal target sizes.

Help me understand…

My WOA SPR gas block journal OD is measuring 0.752 and my Geiselle super gas block ID is 0.750. So looking at 0.002 interference.

According to ChatGPT, if I heat the gas block to 450 degrees, and the barrel is in the freezer overnight, it should gain me 0.0021 clearance for a thermal fit.

Yes I understand that I can hone the gas block and polish the journal.

Anyways, am I crazy to be concerned about the gas block constricting the bore once everything comes back to room temperature? Main concern for constricting is the bore would be affecting accuracy and durability.

I know that a lot of folks have done thermal fits with their WOA barrels but wanted to know what level of interference starts being too much. I presume there is a safe limit.

Flame away.

Cedar Creek Precision – Monthly Long Range Match | Western KY





Looking for a match that breaks out of the square range routine? Come shoot with us at Cedar Creek Precision in western Kentucky. This monthly match brings a true field-style experience with natural terrain, multiple firing positions, and a fast-paced, no-BS format.





Match Style:


Find, Range, Engage – You’ll be working real-world scenarios with hidden targets, ranging on the clock, and engaging from multiple natural and improvised positions. Barricades, uneven ground, and terrain-driven angles keep it interesting.





Key Highlights:

• Two separate ranges with targets well past 1000 yards
• More than a dozen firing positions across varied terrain
• No square range setups – expect grass, hills, trees, rocks, and brush
• Positional stages with barricades, natural obstacles, and time pressure
• Varying target sizes — precision counts
• ~100+ rounds required — bring enough and a good dope card
• Fast-moving but laid-back environment — shooters helping shooters

When: Monthly — PM for upcoming dates or follow us for updates. 2nd weekend of every month. Also find them on practiscore.

9-10 August 2025
13-4 September 2025
11-12 October 2025


Where: Cedar Creek Precision –
14270 Melvin West Road
Hopkinsville, KY 42240


All skill levels welcome — experienced shooters, new long-range guys, and everyone in between





If you want a challenging but fun match to sharpen your field skills, this is it. We keep it efficient, honest, and real. No gimmicks, just good shooting. PM for sign-up or questions.

This is a factory Rem700 re-barreled action. Wilson 24” barrel, heavy varmint contour chambered by Buschmans gunsmithing, 1 in 8 twist . He also did some trueing on the action and recoil lug. The end threads are 5/8. This thing is a hammer. Photo 1 10-shots with 80GR ELDM's 3047FPS with 26.8 of varget. The second photo is a 5-shot group with 77-Grain SMK's and 24.5grains of Varget when I was fire-forming brass.

Lee .223 Ackley Sizing Die
425 pieces of Lake City 2x Fire-Formed brass

Asking $650 (SOLD) and we split shipping.

If interested I can sell as a rifle in an MDT XRS Chassis and a trigger. Buyer to pay shipping.

As new, $4500 $4300 Shipped

Brand: HM Defense
Model: HM50B2 Gen 2
Caliber: .50 BMG
Action: Bolt Action
Capacity: 10
Barrel Length: 29.25″
Twist Rate: 1:15
Muzzle Thread: 1″-14 TPI
Weight: 29.75 lbs
Overall Length: 56.75″
Receiver Material: 7075-T6 Billet Aluminum
Handguard: 14″ Free-Floated Picatinny Rail
Trigger: HM Target Trigger
Grip: ERGO Tactical Super Ambi
Stock: Adjustable CNC-Machined Aluminum Stock
Bolt Material: 9310 Steel (Patented HMB Bolt)

Been a long time lurker. Finally registered. Enjoy target shooting. Been reloading over 10 years. After years of inexpensive bolt actions, stepped up to a seeking HAVAK HIT, not the pro. I’m a 308 nut. Bolt actions and AR’s. Just jumped in a Ruger LC 10mm. Interesting AR. Wasn’t really interested in pistol carbines but when 10mm was introduced, got one to go along with my RIA 10mm. Great combo. Mostly view the bolt action section.

Really Right Stuff Anvil 30 w/ Two Vets Sporting Goods conversion bowl. Pre-owned but well taken care of and in very good condition. Tried to include any minor cosmetic marks as best as possible in the photos. Sold as is. $375. Will ship.

Up for sale is my much-beloved Halo XRF. I have switched to a NocPix S60R, so this must go. But it is a fantastic scope in excellent condition and works great. The LRF is particularly impressive.

Purchased October 2021, so one year remaining on the warranty, though N-Vision’s customer service is excellent.

Includes:

-Bobro and ADM mounts. The Bobro is superior in my opinion and works great with bolt guns.

-Some extra factory bushing and screws for the ADM mount.

-N-Vision USB-C wire.

-18650 charger. All good quality 18650s work great in the Halo XRF.

Questions and legitimate offers welcome. I do not have the original rubber eyepiece, but it was annoying and ineffective. The Butler Creek flip cap is superior in all respects and I have several more that fit if you’re interested.

Seeking $5000 shipped and insured.

Im building a masterkey AR/870 12ga, looking for some solid options for mounting them, if anyone has one or know of reputable companies making mounts. Building it on a 10.5" 458 socom for a breaching themed build. I was wanting to suppress both as well. So far, no can picked for the 458, but possibly a rex silentum, and for the 12ga, I was wanting to run a jk 195 versax 12k.

The action started as a Winchester M70 Classic Stainless in 300RUM and milled out the rear of the magazine well for a Wyatt's extended box. The internal length is approximately 3.840" and windowed to hold three rounds down. It'll hold 1+1 with longer rounds with the bullet tip sitting in the feed ramp. FWIW, it feeds .300WinMags very well too.

The receiver threads have also been opened up to 1.0625" and the receiver faced perpendicular to the threads. The bolt face has also been dressed to match the receiver.

The bottom metal is a PTG "Oberndorf" style long action M70 also milled out to accept the Wyatt box. It's nothing fancy to look at but is robust and works.

The barrel is a 29" 1-9.5 Brux Heavy Varmint with a five-port Beast by Muzzle Brakes and More. With brake 31.5 inches. The overall weight of the rifle and scope is 17.8 lbs and with the Razor, Beast brake, a 300gr bullet at 2950 recoils about like a .243. The barrel currently has mid 200 documented rounds - 40 rounds of 300gr SMKs over IMR7977, and 60 rounds of 285ELDs over H1000 (original owner) plus 80 of N570 and 300 OTM after doing the +P chamber by Shawn Carlock. Load of 86 grains of 570, 300 OTM, BR2 is giving .5 (5 shots) at 2950 fps. Shawns load data says you can go to 100 gr N570. I left it at 2950.

The stock is a McMillan A-5 and bedded with Marine Tex. Hook was filled in and stock painted. The barrel is fully bedded forward to roughly the balance point and free floated forward from there. Adjustable cheek and ARCA rail added.

Includes set of +P dies with micro seater.

PTG .338 Edge reamer that has cut two chambers, a PTG .338 Edge Go-Gauge
-Redding FL neck bushing die and Competition Seater (directly from Defensive Edge)
-100pc Norma 300RUM and neck turned to .014 once fired.
-Approximately 270 Berger 300 OTM bullets.

Reason selling is Shawn just did a 300PRC +P for me with 215 bergers. No need for both rifles.

Rifle, dies, brass and bullets is $2000

Vortex Razor Gen 2 with rings, throw lever and caps is $1600

Everything $3500

Rifle, dies, brass and bullets is $2200

Vortex Razor Gen 2 with rings, throw lever is $1600

All knights Armamanet- ECR converted to M110 with gas block and muzzle device swap. Cerakote on the barrel is coming off. Cleaned thoroughly for pictures.

Glass is sold.

$9500 to your ffl. Serious buyers please ask away. Thanks

I just ordered a carbon barreled action. Wanna see pics of what all you fellas are running! I know that there are pics of them in the rimfire pics thread……. But, I just wanna see your b-14r’s!

I have four 3-packs of the Ruger BX-1 10-round magazines for 22LR.

SOLD

Wanting to sell a impact 737r short action, standard bolt face. It only has 1100 rounds on it. Decided to go a different route so I dont need it really. 1200 shipped to ffl.

I've always been mesmerized by metal being worked, whether as "simple" as cutting with Oxy/Fuel, all the way to TIG welding or being precision machined. Welding and blacksmithing have long been up there on shit I wanted to better understand, so I'm currently a little past halfway through a Maritime Welding course.

I know a bunch of y'all are talented manipulators of metals across a variety of trades and figured a place to post up projects, Q&A, etc may be cool. Hell, it may even serve as a heads-up for hiring opportunities around the country,

The thread in the Pit from Strykervet needing some welding brought this to light again recently, and I know that I'm learning more after class drinking with old welders and diagnosing my problems than I'm getting in the actual class.

I'll happily throw some "failure" pics up from class projects as a counterpoint for folks who look at beautiful welds and have no blessed idea how much skill is required to produce them.

Brand new
1.75” Riggers belt
Style 143026
Black
Large
No tags

1.5” Tactical belt
Style 143009
Black
Size Large
36”-38” waist size
Tags included

$59.99 each new

$35 each shipped conus

Brand new:
Pro Knuckle Glove
Style 150007
Size L
Men’s

$49.99 new

$35 shipped conus

Buy all 3 for $90 shipped

2 MDT comp muzzle brakes for sale. One is in great condition and barely used $150. The other is in rough condition $90. Take your pick. Prices are shipped. Threaded 5/8-24. Feel free to pm me with any questions

Bnib vortex razor 12x50 UHD binos. I warrantied them through vortex. Decided to go a different route for my next set. $1300 shipped and insured. Feel free to pm me with any questions