Up for sale is a 18” stainless steel proof 6 arc barrel with between 100 and 150 rounds through it. The barrel does have some cosmetic damage due to me losing my patience with the gas block, after breaking all my hex keys on the gas block screws ended up drilling out the screws which left a slightly larger dimple, and there are some scratches around that area as well from me hammering the gas block off.

Besides that the barrel is very lightly used. Don’t have any groups from it. Never really tested its capabilities as I didn’t have an appropriate optic on that rifle and eventually just ran out of enthusiasm for the project. Kinda hate to sell it but it’s just sitting in a drawer and it’s time to let some stuff go.

$sold shipped, will include rifle +1 gas tube

Also selling this Grey Ghost Precision 15” ar-15 handguard. Got it as a “blem” but couldn’t find the blemish. This was used on a rifle but was only taken to the range a couple times, still in like new condition with no scratches or noticeable blemish. $sold

I recall these clones with 'fake' suppressor being sold years ago.

Sold 2/13

Selling a post-2014 AX AICS R700SA chassis in FDE. I've used this for many years now on a 223AI that was used for target work and ground squirrel blasting.

Still in very good condition other than minor marks in the cerakote around the magwell from inserting and removing mags and a bit of wear on the front picatinny rail where my bipod clamped.

Comes with a RRS BAXR15C ARCA plate, a 5 round 308 AICS magazine with the front lip for the AX AICS chassis, and a few extra picatinny rail sections for the handguard as seen in the pics.

Asking $1500 shipped and insured. Don't really need any trades at this time, sorry. Payment via discreet Paypal F&F, Zelle, USPS MO, or check (will ship when payment clears.)

90 degree Left hand Kelbly Prometheus short action 223 bolt face. BNIB

$950 shipped

PP FF/Venmo

Did a search here and found alot of info here but being a dinosaur whos still shooting mostly 5.56 and 6.8spc I was wondering about the jackets on these bullets.
I read in one thread that BHA was using these aeromatch in their mk262 ammo? Is that confirmed? If that is true then I would almost assume that the construction is truly a clone of the vaulted 77grSMK.
Im mainly concerned with its terminal performance and external ballistics. Has anyone sectioned one or did any sort of medium testing with this bullet?
I like Horny bullets and have been using the 75grbthp for my 262 clones lately because its too hard and too expensive to find and buy the seirra, clone velocities seem to be way easier to match or exceed with the 75s too. Accuracy is still moa at 300yds too, I did it yesterday actually. The only reason Im curious about the aeromatch is my ocd is screaming about using the wrong bullet. With all the money I put into cloning that rifle I have to use the correct bullet too right?

Looking for a nice quality 224 Valkyrie on AR platform. Something pretty accurate. Bilet receiver set. Nice trigger, nice barrel. Pm me what you have to sell

Would appreciate thoughts on this. While I have assembled several rifles I am still learning and would classify myself a couple pegs above novice.

I chose the Bergara Action and HS Precision stock. I bought a standard Model 700 mag box, spring and follower. It fit fine. However cartridges do not stay in the mag box. Doesn’t seem to lock in. I’m swimming between these thoughts.

1. Bergara takes something different than standard 700 box?
2. Spring to strong? But cartridge still doesnt snap like my REM 700 does.
3. Feed lip need to be bent some? Heard of this but doesn’t seem like I should have to do that.

Thanks and forgive my inexperience.

Have three Benchmark 30 caliber, 5 groove, fluted, barrel blanks.
All will finish 26 to 27".

SOLD Two - 1-10tw, standard palma contour

AVAILABLE One - 1-11tw, lite palma contour

Asking $575 shipped per blank.

Vortex Precision Cantilever mount. 30 mm 20 moa. These mount are made by Seekins for Vortex. Sold the rifle so wont need the mount. $150 plus shipping.

$1500 $1450 $1400 $1350 shipped TYD. Brand new in box, never been opened!

PM any questions.

I purchased these way back when Based on this article.

I only ever used the scope alignment bars (never the lapping tools/paste, etc). And I only used those bars once per set. In other words, it's functionally "new".

"Mr. Kokopelli" was an older gentleman when I spoke to him and his website is no longer working. I hope he is doing well. He made a fine product.

Note that these are 1" and 30MM sets (sorry, no 34mm) They are very heavy as you would expect for a huge steel bar and aluminum bar stock.

$150 per set shipped CoNUS; Both sets for $275

Hello all. I was unfortunately fortunate enough to inherit multiple long range / bench rest guns along with reloading equipment etc. In the last 8 months I have familiarized myself with these guns, reloading equipment and long range shooting in general. My question involves two of the guns I have inherited. The first is a DPMS varmint heavy barrel upper in .223, Aero lower that I built with a Daniel Horner timney trigger, the scope is a leupold VX-III 8.5-25. I can put really solid groups together with this rifle. my best group being a 1.5 inch group at 220 yards. so far it has liked almost all the ammo that I have made and put through it. It is just a pleasure to shoot. It is also worth noting that this gun has a junky stock on it right now as i havnt had the time to buy and install a PRS lite which i plan for this gun. The second gun I inherited was a JP Enterprises LRP-07 in .308. This gun has a vortex razor HD 4.5-27 with a Calvin elite trigger that i installed. when I got the gun it had the factory roller trigger. I for the life of me cannot shoot this gun worth a crap with either trigger. I realize that this JP rife is many times better than my DPMS upper however I have trouble getting a 5 shot group to stay within an 8 inch target paper at 220. And even then the groups don't ever show much of a pattern that I could make zero adjustments off of. I have watched many videos about long distance shooting and believe I have an understanding of proper technique. I inherited other bolt guns in .308 and 22-250 which recoil similar if not more than the JP rifle and I shoot those fine. And the previous owner of this JP rifle could stack shots at 220 yards. I have tried many different loads through this rifle from 115 grain all the way up to 170 grain. Before I resort to paying for a professional lesson I was wondering if there is anything this group could offer to me that I might have missed. guns will be pictured, they are the top two. Thanks all for your time!

Hornady A-MAX .308" 208gr A-Max bullets for sale. Two lots make up these 11 and a partial opened box. Lets just call it 1,100 pcs plus +. 500 in the one lot and 600 in the other.

$350 Shipped for ALL / PayPal FF

Does anyone have a excel spreadsheet used to track lot testing they could share?

$2,000 into the build
$850 TYD smoking deal.

Located in chandler az prefer not to have to ship.

Round count 150.

Fun trainer.

All items purchased in 2/2022.

Located in chandler AZ.

Harris Bipod not included.

Parts list:

Barrel: Rainer arms ultramatch .223 Wylde 1:7.5 twist FMC .223 18” $400
Handguard: Bravo company $250 BCM KMR-A17
Trigger: Larue Mtb 2 stage trigger $107
Bolt carrier group: Bravo company $189
Only used item. Had a toolcraft in it but it didn’t cycle.
Buffer tube: JP enterprises silent $139
Butt Stock: Magpul lite $114
Adjustable gas block: $120 superlative arms clamp on
Charging handle: Gasbuster $89
Upper: Rainer arms $130
Stripped lower: aero gen 2 stripped $110
Trigger guard: Fang Billet $19
Lower parts kit: Aero precision $25
Adapter sling stud $32
Grip: Magpul $25
Bolt catch: Geiselle $30
Safety selector: Armaspec st 45 $35

Is there a source for calculations to determine the optimal barrel length for a given cartridge?

I've searched the forums but I didn't find a source for the formulas.

I'm not smart enough to figure this out myself, but I think I am smart enough to understand the formulas if can find them.

Any assistance would be appreciated.

Hey all, haha right around when I ordered my rifle from Tactical Rifles is when all the shit hit the fan with them hahaha or at least when I noticed the shit they were involved with… my rifle shoots really pretty good tho so I must have dodged a bullet. Anyway it’s big and heavy and thinking about selling the action/barrel and/or the AI stock it came in. What is this stock called? I’ve seen some call it The Legacy. It takes the single stack mags.

Any idea what the rifle or even just the stock would be worth? I found one on Tacswap and the fella said it should be 2.5-3k for just the stock. I don’t know about all that but figured I should ask here.

Im looking at the sig cross in .308 and am leaning toward the 20” “STX” anyone have experience with this 20” cross yet? The 400$ extra dollars for 4” over the 16” barrel seems a bit steep. I’m not really interested in the other “upgrades” I’d like the 4” but idk.

Anyway thanks!

Used but well cared-for JP APAC-A chassis (R-700), with basically all the accessories available for this thing. Here's everything, looking to sell it all as a package if possible.

• JP APAC-A Chassis
• JP Bag Rider
• (2) JP Handguard Weight Kits
• (2) Grips: Magpul MOE and an angled Ergo
• QD Sling mount (this is curved to fit the profile of the round JP foregrip)

Also have a JP "Benchrest Forearm Adapter" that works on any ARCA rail, but I got it with this chassis. It's actually a pretty cool accessory that gives you a flat plate for stability but also has molded thumbrests, and a threaded anchor so you could mount it to a tripod as well. (https://jprifles.com/buy.php?item=JPHG-BFA3)

• JP Benchrest Forearm Adapter

This is an awesome chassis, the folder is the most solid lockup in the industry, hands down. Toolless cheek rest and LOP adjustments, the usual stuff just all really well-engineered and bombproof. Everything's here including the original box and all accessories have the original paperwork (see pics). I included a pic of this chassis with a 26" barreled action in it just for size reference.

All necessary hardware including action screws is included as well (see pic). Spares too. Oh and the JP sticker for safe cred.

This is about $1900 worth of stuff if purchased new, take it all for $1250 shipped (now $1150). Tryin' to consolidate (and still keeping one of these for myself!)

$1250 $1150 shipped (price drop!) PP F&F or Venmo preferred. DM me if interested. Thanks!

SOLD

Silencerco Radius
With original paperwork, box, target, tape switch. In very good condition. It works great, i just don't have a use for it right now.

Can send more pics or answer any questions.

$650 shipped to lower 48

Ppff, venmo, usps money order

2009 join date.
229 posts
9 of those posts between 2009 and 2011
220+ posts between 2024 and now

How are these USAID / fedgov shills getting ahold
Of these old accounts ?

Selling a Sig Rattler in 300 BO. Excellent condition. Has been fired 20 rounds. $1900.00 shipped.

Asheville, North Carolina’s Community Reparations Commission (CRC) finally released a list of recommendations it wants leaders to pursue, including a guaranteed income program and the establishment of a reparations accountability council.

The Asheville Community Reparations Commission is comprised of 25 members who were chosen more than two years ago, in March 2022. According to the city, the commission is tasked with making “short-, medium-, and long-term recommendations that will make significant progress toward repairing the damage caused by public and private systemic racism.”

The commission recently released its list of recommendations in four specific categories, one of which is a guaranteed income program. According to a document detailing the recommendation, this program would be used “as a way to ensure basic needs are met for individuals with low-incomes and assets” in the form of monthly cash payments with “no strings attached” and “no work requirements.”

“A guaranteed income is meant to supplement, rather than replace, the existing social safety net and can be a tool for racial and gender equity,” the commission wrote, adding that the reparations accountability entity, along with the city and county, “should determine the parameters of a program, which will benefit individuals who have been harmed by historic, systemic, and ongoing wage and employment discrimination.”

The council concluded that “Black People have been consistently and widely impoverished by discriminatory wages paid in every sector of the local economy regardless of credentials and experience” and have “experienced disproportionate unemployment rates and reduced opportunities to fully participate in the local job market.”

Further, the council accused the city and county of participating in urban renewal, which it claims “destroyed many homes and businesses owned by Black families and greatly harmed many traditional minority neighborhoods, displacing many individuals to public housing and taking opportunities to build generational wealth.”

The council is also recommending additional support to existing neighborhoods to “empower historically African-American communities” in the form of grants. Minimum funds should be, according to the council, at least $250,000 per community. The council believes this will “address the harm imposed by redlining.”

Further, the council believes there should be the establishment of an Economic Development Center for black Asheville residents as well as the establishment of a Reparations Accountability Council, which would “oversee all CRC recommendations implemented by the city and county and their contractors.”

According to ABC 13, this is just the beginning of recommendations of the council, as more are expected to come.

This is not the only push for such programs in the U.S., as Democrats in California, for example, are pursuing reparations bills. This comes despite the fact that California formally joined the Union in 1850 as a free state.

We're not able to go out and buy FA weapons yet but things are looking up!

Login to view embedded media
Login to view embedded media

Excellent condition. Only used for a few weeks. Includes go pro brand spare batteries and dual charger. Go pro brand selfie stick included as well. The remote shown in the pics does not work, but will be included as well. You can tinker with it if you like, or buy another for about $30 if this is an item you need

$165 shipped for everything shown. Trade +- for desert tech mags ,parts, accessories. You can also click on my username to see other items i am trying to move. I'll combine shipping as much as possible