Unfired. Comes with everything seen here: Two Mags, Soft Case, etc.

$1,100 Shipped CONUS.

Before I forget, the "risers" for the NV cap are also included, I just forgot to include them in the pics.

This assembly consists of KRG's Spigot Mount, NV Cap, dual QD Plates and a picatinny rail section on the bottom. Altogether it would be over $400. This will work on Sako TRGs (42 and 22) and KRG's Whiskey3 Chassis.

$300 Shipped CONUS.

BNIB - I guess I overbought when I ordered these. Price goes down depending on how many you want:

QT1: $65 $55 Each Shipped CONUS
QT2: $60 $50 Each Shipped CONUS
QT3: $55 $45 Each Shipped CONUS

LaRue Mount for Trijicon MRO/MRO Patrol - I went to 2.25" a long time ago, and this has been sitting in my drawer.

$75.00 $65.00 Shipped CONUS.

Feel free to reach out with any questions. Has a couple of nicks as it lived a few seasons on top of my match rifle.

Great shape, one of the spotters with better eye relief out there. Feel free to reach out with any questions. Comes with a cover.

Integrally suppressed AR9 for sale. Cool little project, but I'm working on an MP5-SD so this has to go.

Built as follows:

Angstadt Arms 0940 Upper
Angstadr Arms 0940 Lower Receiver Glock
Black Rain Ordnance M-Lok Hybrid Handguard
Angstadt Arms Vanquish 16" 9mm – Integrally Suppressed
Faxon Firearms 9mm AR-15 Bolt Carrier Group GLOCK/Colt Style - Nitride
TT AR-9 Competitive trigger 3.5 lbs
Magpul MOE Fixed
KAK Buffer and spring
Holosun sight

Asking: $1850.00 as pictured

Test Fire Video

Don't know how I got the ring marks, I'm pretty gentle...otherwise barley/lightly used and mechanically like new. Full kit. 650 shipped.

I'm looking at a new CZ 600 Alpha in 224 Valkyrie. I know there's a safety recall to make the barrel a permanent installation.

But I've also read this:
For a new CZ 600 with the original barrel:

• Safety: The original barrel and its installation are safe and unaffected by the recall.
• Use: You can safely use the rifle as intended.
• Modification: Avoid any modifications to the barrel or its attachment system, as this could compromise safety.

Has anyone purchased one and never sent it in?

Have a few things sitting around that I need to part with.

Aero Precision Solus Competition Chassis 17 inch forend in black - $600 shipped

Triggertech Field Curved Trigger for R700 - $150 shipped

Rise Armament Rave AR 15 trigger - $100 shipped.

Let's get this going Guy's. Gotta lot of stuff to put up. Busy wet day.

$500 shipped. PayPal FF or Venmo. I won this and used it a couple times, but I prefer to use my Garmin.

Hornady AP press with Inline Fabrication ultra mount. 9mm and .223 shell plates. New and will ship in original box.

$425 which includes shipping (lower 48)
PayPal only

Does not have case or bullet feeder

Selling a Frankford Arsenal Case Prep Center

$100 shipped

I did not see a .408 reloading thread so figured I’d make one.

I did a pressure test with RL25 with 420 grain Parker Productions (Formerly known as RMB) this weekend. I loaded them .025 off the lands


At 134 grains I saw pressure signs start to show on the brass. No heavy bolt lift.

From what I have observed with Retumbo and these bullets they seem to like the 2850 range. So I will test the 128-129 grain charge next time I get to the range.

I used Peterson Brass & FED215 primers.

Rifle was a factory Desert Tech HTI 29” 1:13 barrel.

Looking to do a brief survey here....if you've got a pile of fired brass and want to reload them, what steps do you take in what order?

I ask because despite getting pretty decent results, I'm wondering if I'm missing something. My steps are:

Tumble clean
Deprime/FL resize
Wipe off sizing lube
Trim to length/chamfer mouth if necessary
Clean primer pocket
Prime
Charge with powder
Seat bullet

Thanks...

All factory ammo fired once. Discreet PayPal Friends and Family or Venmo gift.

LRP from factory Hornady 6mm Creedmoor 108 gr ELD Match (pictured left column)

$120 shipped per 300 pieces (3x available)
Take all 900 Hornady pieces for $300 shipped

////

All Norma brass sold.
LRP from factory Norma Golden Target 6mm Creedmoor 107gr (pictured center and right column)
$old shipped per 300 pieces (3x available)
Take all 900 Norma brass for $old shipped.
$old for the bag of 264 pieces

Lightly used ACE brake I had sitting on my shelf. Less than 20 rounds through it.

Nitrided, 5/8x24 thread, 6.5mm.

$120 shipped.

All items are unfired Zermatt TL3 SA with an 18in Proof Carbon Sendero profile barrel, chambered in 22ARC. FFL must accept from an individual, no muzzle brake or stock included, this is only for the barreled action.
$sold shipped

I have 2 rear weight kits for the MPA BA Comp chassis. Each kit has the rear steel bag rider (1.2 lbs.) and the rear monopod weight (1 lb.) $80 each shipped COUNS, thanks for looking!

1 box of unopened 153.5 LRHT 6.5mm Berger Hybrids.

Lot number in pic.

$270 shipped to the lower 48.

Two One lightly used AREA 419 36mm 1.54" height tactical scope mounts for sale.

I don't have any 36mm scopes anymore, so no need for these mounts.

$275 shipped / per mount to the lower 48.

I will only trade for Area 419 34mm 1.27" high tactical scope mounts.

WTS: JAE +6” ARCA Rail, brand new, comes with all factory screws, never used. 95 shipped to your door.

Up for sale/trade is my like new Geissele MK1 Mod 0/MRGG-S 20" 6.5CM.

150 rounds fired, comes in factory hard case. 3 different factory loads printed .7moa or less.

Mostly looking for trades, custom rifles, LW hunting rifles, Seekins PH3 etc etc. plus cash/optics

No optic, mount, bipod or can included. Will come with factory G grip installed.

Pending Sale

Paypal FF, Venmo FF, Zelle.

Selling only, sorry no trades.

Benchmark 6.5mm barrel
Cut rifled
4 groove, 8 twist
28" length
VCC contour

$375 shipped

Please message if you wish to purchase