Looking to sell a Defiance SA Mag Bolt. Bolt came out of a Deviant and was a second bolt to a barreled action I bought. Seller stated it had 200rds on it and it was cerakoted when I bought it. I sent the bolt out and had it nitrided. Bolt does not have any rds on it since coming back from being nitrided.

Trade for a Defiance SA Standard Bolt.

SOLD Shipped PP Friends and Family, Buyer pays insurance if wanted.

I got scammed on a fake ATACR and this is what eventually showed up in the mail. This is a pretty good clone of a Nightforce ATACR 1-8 that uses a DMx-like reticle and appears to be of "decent" material and optical quality. It even comes with a set of Tenebreax/Nightforce branded scope caps (cannot confirm authenticity). It feels robust enough to at least be suitable for 223/556 use. The scope is in what appears to be new condition and will come as shown.

LINK to the manufacturer's product page.THIS IS A FAKE ITEM AND A COPY FOR SALE. NOT A REAL NF SCOPE.

SOLD

No trades please.

Introducing the RimX action from Zermatt Arms.

www.rimxaction.com

- Remington 700 Footprint
- Integral Recoil Lug
- Nitrided, chromoly reciever
- Nitrided bolt body
- DLC Coated Bolt Head
- Non-protruding, fixed extractor
- 6 o'clock firing pin
- Tool-less bolt disassembly
- Interchangeable bolt heads
- 22 LR / 17 Mach 2
- 17 HMR
- 17 WSM
- 7075 Aluminum 10 round magazine (anodized)
- Pre-fit, shouldered barrels available
- $1150 / ea. Includes (1) magazine

Check out the website for more information regarding the product!

M110
Started as an SR-25 ER. Factory installed m110 barrel assembly and upgraded BCG.
It was built with a request of maximum accuracy. This is the closest you can get to a real factory assembled m110 without buying a limited edition release or a grey market upper. It is even described as an m110 on the test target.
M110 test target series average .67
Cerakoted to match the original Taupe color.
Less than 1000 rounds through it.
$sold for rifle and iron sights only. No trades
Scope and mount is available to purchaser of the rifle.

M110k1
An ECC. This has been spray painted so it can still be reverted to the black anodizing.
About 1000 rounds of FGMM through it. Bore is in excellent shape.
$11k for rifle only. No trades
CAG issued scope with mount and CRS suppressor are available to purchaser of the rifle.

I commissioned a 16" Centurion Recce 5.56 barrel using a Bartlein factory blank in 2019ish.
Barrel specs:
16" Recce profile, mk12 chamber for mk262 ammo
Bartlein 5R blank
1:7" Twist
Mid-length gas system
Pinned Centurion gas block w/tongue and groove
Melonite gas tube.

Centurion BCG that has only been with this barrel

About 270 rounds max on the Barrel/BCG

$695 shipped for the barrel as shown with the BCG

L.E. Wilson micrometer case trimmer kit. Includes power adapter, DACM power pod, custom wood stand/organizer, and 13 case holders. Total cost on assembling this complete kit was $600. Will take $200 shipped.
243-308-358
243-308-358 new case
x47 Lapua
Creedmoor
Creedmoor new case
Grendel
Grendel new case
WSSM
WSSM new case
222 & 223
30-06, 270, 280
300 AAC
6mm Dasher

I know they still make the 42 but I'm hoping someone wants to get rid of one before I back order it. Needed for a match that's capped at 10x magnification and will pair nicely with my mk12 build.

I wonder if there is any serious radiation leaking from any of the destruction in Iran? I haven't heard any mention of this

$2950 Shipped.

PayPal F&F, postal money order, or check (will wait to ship until it clears) works best for me.

Tangent Theta 3-15 hunter model. Mil version. The scope has been hunted and shot with alot. Has some scuffs from rubbing on buckles on a pack, and little dings and nicks on high points. Glass is flawless and just came back from Tangent Theta for a service.

I have a new stock of Surefire SOCOM Suppressors ready 3 to your dealer.


In stock :
556: RC3’s- black
556 RC2 — black and FDE
762 RC2 Black and FDE
762 MINI Blk and FDE
300 SPS BLK and FDE
SB2’s - black and FDE
338 black and FDE


In bound :
The SOCOM762-Ti is simply the ultimate lightweight suppressor for 7.62 mm bolt-action rifles. Constructed of high-grade titanium, it weighs just 11 ounces, minimizing impact on weapon handling characteristics. Although the material choices are lightweight, this suppressor does not compromise on performance, strength or durability standards, and it’s engineered to meet and exceed military sniper rifle suppressor specifications.

The SOCOM762-Ti’s innovative venting technology evenly distributes thermodynamic gases, significantly reducing pressure impulse effects on the projectile as it clears the muzzle. It bears the SOCOM name, so you can be sure it delivers immense reductions in sound, flash and dust signatures. Precise tolerances and strict attention to bore concentricity deliver exceptional alignment, resulting in a suppressor that maximizes accuracy and minimizes point-of-impact shift. It may be light, but its impact is undeniable.


SSRC2
762 $1349 MAP Black and FDE
556 $1079 MAP Black and FDE
300SPS $1169 MAP Black and FDE
762 Mini $1169 MAP Black and FDE

I have NIB SOCOM RC3 556 suppressors. These are on Form 3's ready to go. $1575 Shipped to your FFL/Class III Dealer

The SureFire SOCOMRC3 suppressor combines decades of SureFire innovation in materials and manufacturing techniques with the most extensive flow dynamics study in history to advance the state of the art in modern combat suppressor technology. Designed with exclusive parametric modeling and multi-variable aerospace software, it delivers unprecedented back pressure reduction and flash reduction without compromising SureFire’s field-proven durability. Made in the USA, the SOCOMRC3 uses only the finest materials and advanced manufacturing processes, ensuring extreme accuracy and consistent repeatability. It is a true game-changer in combat suppressor design.

60% Lower back pressure
Unmatched flash reduction
Extreme durability
SOCOM muzzle device compatibility

I have a large stock of SF suppressors and muzzle devices

Stock Changes Daily Please message for the most up to date stockage and pricing

Attachments​

• 
  download-1.jpeg
  5.5 KB · Views: 152
• 
  IMG_1876.jpeg
  568.7 KB · Views: 148
• 
  IMG_1877.jpeg
  152.3 KB · Views: 144

I have several of the the Pro II's in stock $299 shipped.

Surefire, STILETTO PRO II, Flashlight, High 1500 Lumens, Medium 500 Lumens, Low 25 Lumens, 35,000 Candela, Tactical Switch, Aluminum Body, Matte Finish, Black, USB C Recharging, Deep Carry Pocket Clip. The Stiletto that punched deep into darkness Dual optics provide 35,000 candela for long-distance illumination Three selectable, programmable settings with 1,500 lumens of Hybrid Beam performance on high output Sleek, slim aerospace aluminum body ensures easy concealment and maximum durability

ALL CD lights hand held and Weapon lights on sale ​

I have Black and FDE Rein MICRO GEN III's in stock as well as Hand held CD lights.

Output Specs & New Features

95,000 Candela peak beam intensity (With 18350)
1000 Lumens output (With 18350)
40 minutes run-time (With 18350)
Dual-Fuel capability.
1.3” Bezel diameter – smaller than the original REIN in diameter.
4.88” in length.
Reduced mounting lug height.


Included:

1 REIN 3.0 Micro
1 Remote switch tail cap assembly with integrated push button
2 LCS side plates with hardware
1 Torrent MLOK Inline, with all mounting hardware
1 Cloud Defensive labeled Nitecore Charger
1 18350 battery

PM for Snipers Hide Pricing
I have a new batch of Gen III lights:
Rein 3.0 Dual Fuel.
100,000 Candela peak beam intensity (With 18650)
1250 Lumens output (With 18650)
95 minutes run-time (With 18650)
Dual-Fuel capability. REIN 3.0 runs on 18650 and now, can also run on two CR123 batteries. 18650 rechargeable battery provides the best output, by far. However, you can now use 2 CR123 batteries if needed. You will see reduced output with CR123 batteries.
1.3" Bezel diameter - smaller than the original REIN in diameter.
6.17" Long - a very compact full-size light.
The same reduced mounting lug height as the REIN 2.0. Shorter than the original REIN 1.0 allowing for tighter mounting. $399 MAP....


Cloud Defensive, MCH Duty, High-Output Handheld Light, 1,800 Lumens, 50,000 Candela, Tool Steel Bezel Ring, 5 Mode Programmable Output, 3 ND Protectors, Accepts 18350 and CR123A Batteries, Black. $249.99 MAP

Cloud Defensive, MCH, Mission Configurable Handheld, Everyday Carry Flashlight, 1400 Lumens, Single Output, Accepts 18650 and CR123A Batteries, Aluminum, Anodized Finish, Black, Includes 18650 Battery, Charger and Pocket Clip

40,000 Candela
1700 Lumens
120 minutes Runtime
4000-5000K light temperature
Head Diameter: 1.20"
18650 Light Length: 5.175"
Runs on 18650 or CR123A
$239.99 MAP

as well as Rein 2.0's, MCH Micro's, Gen 2 MCH EDC's and several others, Lots of colors.
Text or pm for best pricing.

Attachments​

• 
  microemail5.jpeg
  497.3 KB · Views: 45
• 
  IMG_1397.jpeg
  185.8 KB · Views: 42
• 

WTS:

Zermatt origin action
Vision chassis
Proof 6gt comp contour prefit
Timney hit trigger
Vision Vulcan brake

Has 160 rounds in it exactly, rattle canned but originally black. Just looking to make more room in the safe.

Asking 2750 for the rifle.

Text nine 13 nine 61 three 520

I'm late to the party on this, but finally getting into 3D printing.

What 3D printed hacks, parts or accessories have you tried that you like? Looking for ideas!

Thanks

I'm not sure I've ever had this happen while trying to sight in any rifle in 30 years, but I ran out of upwards elevation trying to get this Browning BAR 22 zeroed at 50 yards. I'm topped out on the elevation turret and still 2-3" low from center. Not good...

I'm using a set of Warne medium height 22 rings and a Burris Fullfield E1 4-14x scope. Scope has 60 MOA of elevation and reticle was centered. The Browning has a grooved receiver. Quality rings and scope, everything is tight and set up properly.

So what gives?

Any one has a .380 face bolt for LP Fuzion to spare?

So apparently Mack Bros snuck the Element action on their site before Shot Show. Looking at the specs and price I decided to grab one for a lightweight 308 shorty build. I also grabbed their lightweight integrated ring mounts.


I'm surprised more people aren't talking about this action. As far as I can tell it's the lightest stainless action and way cheaper than the other options in it's class.

I have 2 and 1/2 bricks $450 shipped.
All same lot.

I just bought a NIB El Paso Weaver T10 for $30 as the objective has the "fungus" desease.
Does anyone have a drawing that show how the internals are assembled?
I'm located in Europe so sending the scope to a US shop for service is unfortunately not an option.

Razor G2 4.5-27. EBR-7C MRAD. Glass is perfect. Slight ring marks. Comes with throw lever and Defender flip caps.
$1600

View attachment IMG_3967.jpeg

Hi all,

I recently broke in a new 6gt build with an ARC CDG. First 20 shots were all factory Hornady/GAP ELDMs and ran fine. My next twenty were my first reloads in 6 gt. Virgin Alpha brass with CCI 450s, 32.5 gr Varget. About 7/10 in each row failed to fire. Light primer strikes. I seated the primers with the Frankford hand primer, though they tended to catch a little on insertion. I’ve since found that i was using the larger primer keyway in the tool with the small primer “ram” piece. I’m not sure if this issue is more related to primer depth or the incorrect tool configuration or something else. Any advice? I’d like to fix my reliability issue with as few trips back and forth to the range as possible since my opportunity to test is limited.



In the picture, the round on the left did not fire, but the right did. What does the rounding on the left primer indicate?

I have not used this as much as I thought I would. I am the first owner and I tested twice while walking my dog. The clarity is amazing. The distance is impressive. The glass and sensor are perfect. Ideally PayPal FF but I get if you want the purchase assurance. I just ask you cover the fee. $3800 shipped.

Leupold Mark 5 5-25. First focal plane. Mils. CCH reticle. In great condition. $1600 shipped

Got some stuff sitting around that I'm not using much anymore. I have a Paypal account but I don't know how to use it (use it about once every 8 months) so bear with me. Otherwise happy to take M.O., check, etc...

1. Manners T2-A Right-handed with Minichassis cut for 3.850 Magazines. Inlet was for a Nucleus but should fit most/all of the standard M700 style actions (may need slight clearance for swept back bolt handles). Configuration has two flush cups on the left side (1 forward, 1 in the butt) and a single stud on the fore-end. Barrel channel has been lightly opened up to clear a MTU contour barrel. Comes with 1x 3.850" long .338 Lapua 5rnd mag. Very little use. $800 shipped (SPF)












2. American Rifle Co. XYLO LONG ACTION with weighted bag rider. Even less usage than the T2A. - $750 shipped



3. 3x .300 WM 3.850" Accurate Mags. "CIP" Pattern L/A AICS 5 round magazines. - $150 shipped



4. Magpul PRS Stock. New in box with an extra adapter. Another one with very little use. Tried it once, didn't like it, put it back in the box. Spare adapter piece for a carbine stock. May be missing some original hardware-- what you see is what I have. $125 shipped (SPF)



5. Magpul stock. Lots of use, forget the model. Full of lead shot and JB weld. This stock won the 2023 2nd place bullet for the PRS in gas gun. Hornady PRC red Utah dust included for FREE! $75 shipped