Like new condition

Asking $105 shipped

Curious if anyone has one they wanna sell? Let me know

Knife is in great condition I've carried it a handful of times just never wanted to mess it up so I usually carry a pm2. $3.5 billion ppff venmo... would trade for half face blades or winkler or gun related stuff

Vortex Viper PST Gen 2
5-25x50
EBR-2D mil reticle
Both scopes are in excellent condition
Ships in original box with sunshade, manual, etc.

$600 each or both for $1175
PPFF, Zelle, or USPS MO

The only two options I've found is this for $1000+
Ashbury Precision Ordnance Electro-Optical Rail Grabber Mount w/Azimuth and Elevation Adjustment
https://www.solidsolutiondesigns.co...ation-adjustment-081-03v-0001-00-color-black/

and this for $39
Orion 7033 Precision Slow-Motion Adapter

Can anyone point me in the direction of other options?
Note I do not want to use a ball head for this. I'm specifically looking for something that has windage/elevation dials.
I should add that my budget is max about $300 for this.

Thanks much!

I have a Vox-S with the Rearden Atlas Mount and it is currently torqued to 35 ft lbs with anti seize. Everything works great. I only shot a few mags through it.

With that being said, should I use Rocksett? Is it a necessity? More harm than good? Just trying to decide if leave it as is or put a drop or two of Rocksett on threads and torque to spec. Thanks.

SOLD



Cleaning out a few unused items.
R700 S/A
Mpa ultralight folder. Green
Used but in good shape.
Comes as pictured

Most people here are probably familiar with Spuhr mounts. 6 screws per "ring", and from 21-25 in-lb per screw. I have I 6-8 Spuhr mounts and have never had any issues (and shouldn't for what they cost). However, I recently picked one up (30mm, 1.89") and mounted a NF NX8 1-8 in it.

I mounted it as I always do, using a FixIt Sticks torque limiter, and started in the middle two screws on each ring to resistance/alternating and then torque to spec. Then I move to the outside 4 screws and do the X pattern alternating to resistance and then to torque. Here's where my question comes in . . . once you torque those outside screws the middle ones are now looser (obviously) and I continue to torque down until all 6 screws are limited by the limiter. Is the torque somehow additive? If it's tightened to 21 in/lb and then you go back over it again after it's been "loosened" by tightening the outside screws on the rings, does that mean it's now MORE than 21 in-lbs?

Now here's the why: after mounting the optic (at the range) and zooming into the targets at 500 yards, things were very, very blurry. I brought it home, set it upon my tripod and looked off my deck into the surrounding hills and confirmed that it wasn't some weird thing at the range. I emailed and then spoke to NF and they said "sure, send it back in", but then I started thinking. What if it's the mount? So, I took off the front "ring" and the image was clear again. I then completely removed the optic, made sure it was 100% centered (the turret housing relative to the rings) and retorqued the rings. The blurriness had returned.

So, I grabbed the a much lower torque limiter and tightened it down just to snug and the image is clear again.

Knowing what I know about NF, it's hard for me to believe there is anything wrong with the scope body such that it's out of round. But the same is true of Spuhr, too.

What are your thoughts? I always think I'm not an idiot, but I consistently prove myself wrong. I'm wondering if this is one of those times.

Login to view embedded media

Responding to call of man with a gun, they saw a man and shot him to death, the man they shot was bold enough to be sitting under a gazebo in a public park. Unarmed and committing no crimes . That in its self is so suspicious they probably should have shot him on principle

Getting closer - at least they found a man !

The man they were looking was the truck they were were looking for dead by suicide. But can’t expect them to find both the correct vehicle and then the right person on the same call . 50/50 at best like the raffle!

I can't say that I am surprised in the least. Does not bode well for Kash either.

As the story is told [SEE HERE], and it aligns with every scintilla of researched data on the darkest and deepest elements of the Deep State, DNI nominee Tulsi Gabbard has reversed her position and will now support FISA-702, the warrantless searches of American communication and electronic metadata.

Click to expand...

Apparently the FISA process and the 702 aspect (specific to American citizens) is the line in the sand the Senate Select Intelligence Committee has drawn. If Tulsi Gabbard does not support it, her confirmation is in doubt. As a result, she has reportedly reversed her position and now supports it.

Click to expand...

This is also a big part of the reason why the DC Deep State will easily confirm Kash Patel to be Donald Trump’s FBI Director. Kash Patel is a big believer in the value of FISA-702.

Click to expand...

https://theconservativetreehouse.co...nfirmed-as-director-of-national-intelligence/

Cartridge case comparison

Was doing some early Spring cleaning and decided to polish up my ELR brass collection…and took pics of it.

Smaller stuff (left to right):

.338 Allen Xpress +P (Allen’s 338 LM Imp+, 3244 fps w/ 300 gr. Berger OTMs from a 36”, 1:8.5 twist barrel, 8 ES, consistently – do not recall the exact load, thinking 113-114 gr RL33)

.338 Big Baer – comparo only (CT parent)

.400/.416 Barrett Imp – built but went a different way

.416 Barrett – comparo only

.400/.50 Imp – built but went another way (shown with a custom 480 gr CEB)

.400/.50 Imp – fire formed

.50 BMG – for ref

Larger stuff (left to right):

.50 BMG – for ref

.50 BMG Imp – comparo only

.50 T.W., turned and prepped – 20x102mm (20mm) Vulcan parent, never completed project (selling the JGS reamers + Warner Tool dies and prepped cases at https://www.snipershide.com/shooting/threads/50-20-rifle-project-–-component-set-tooling-presses-brass-set-or-part-out-most-recent-reductions-in-purple.6944186/)

.50 T.W. – sample from original owner, bullet ukn

.50/20 Oscar, turned and prepped – 20x102mm (20mm) Vulcan parent, never completed project (selling the PTG reamers + Warner Tool dies and prepped cases at https://www.snipershide.com/shooting/threads/50-20-rifle-project-–-component-set-tooling-presses-brass-set-or-part-out-most-recent-reductions-in-purple.6944186/)

14.5 x 114 Russian – comparo only

20x102mm (20mm) Vulcan – comparo only

S&B 4X16 PMII H58 reticle. Used $2000 + Shipping. It has scratches on it. Glass is great and is mechanically sound. What you see is what you get.

Search didn't gen anything up. Any owner/shooter feedback on their factory rifles? I have quite a few of their barrels in my semi-autos. I see prefit barrels available for the elevation/elevation MTR models and with the current prices it would be difficult to build a rifle equivalent to their factory offering.

Dillon 550 Conversion Kits - $60 EA shipped

9mm Conversion Kit
223 Conversion Kit
45ACP Conversion Kit (no box)



Larry

R700 short action with standard bolt face,also PTG magnum bolt and a spare firing pin assembly. Serial number starts with RR.Plug aftermarket recoil lug. Plus bolt release piece and spring. Two complete bolts plus an unused (not sure the manufacturer-its the one with the blue ring. ) firing pin assembly. can only ship to an ffl- from an individual. Paypal friend or Venmo $475 shipped.

As the title suggests, I'm looking for recommendations on Castle Nut tools. I have a standard AR armor wrench, but it chews up the buffer tube threads when torquing the castle nut.

Does anyone know of a tool that won't chew up the buffer tube threads? Hopefully, at a reasonable cost.

Two Vets 40 Mike Mike Tripod with Sunwayfroto XB-44 ball head. Tripod is in really good shape, ball head is in good overall condition but has more surface wear. Ball head fits Arca only and has a locking lever/release.

$350 delivered

Asking $1200 OBO, includes shipping. Located in Denver for in person sale.

In excellent used condition. No scratches or defects on the lenses. Minor wear on the rubberized body. No issues, just upgrading to the Gen 2 version.

Sold with the pouch and wind meter.

Wheeler Digital Firearms Torque Wrench

$70 shipped

Looking for a gently used or like new SR-5 G2 with ARCA mount.

I have 2 lmt barrel one is a 20 inch .308 lightly used approximately 100 ish rounds on barrel and a 18in 6.5cm barrel I had cut down from 20in chop and re-thread done by D.Wilson 6.5cm barrel last new and hasn’t been shot. Asking 650 for each. I will accept PayPal,Venmo

I would like to buy a game changer with lite fill.

So not sure how I missed this... but I have enjoyed the franchise.

It's not great, but not horrible, either.

Left room for a 'middle' movie... another prequel. But I guess it got pretty bad reviews so don't think any more are forthcoming.

But its worth a watch if you are a fan of the series. Creepy...

Cheers,

Sirhr

Accu-Tac HD-50 Bi-Pod SOLD