Looking to move out of my 6.5 SAUM build. would be willing to part out as listed below but would give a better deal if bought as a whole. Rifle shoots exceptionally well, .5 MOA at 100 shooting Berger 140 at 3100 FPS


Rifle as it sits - $2200

Aero Solus Barreled action - $1300
- Solus SA with Mag bolt face
- Bartline barrel chambered in 6.5 SAUM by straightjacket, 22 inch 7.5 twist with ~975 rounds on it
- Triggertech Special trigger
- Area 419 hellfire universal adaptor


Manners Stock and Bottom Metal - $1300
- Manners LRH WITHOUT Mini Chassis
- Hawkins Hunter Bottom metal
- Hawkins Hunter Magnum Mag
- Salmon River Hunter Rail

Please let me know if you have any questions

Sig Kilo 3000 BDX Range finding Binos. Opened box to make sure they worked, and back they went.
Kept as a backup, but never had to use them. Comes with everything pictured. not sure if it came with operators manual but it can be found on line.
They are basically new other than I opened them and not you. PPFF or Zelle. $735. shipped to you.


thanx for browsing
...Jeff

Selling my foundation Samson inlet for Coupe de Grace action. Includes all brass weights and MDT bottom metal. In excellent condition with no visible signs of wear. Price is $1850 shipped, buyer covers PayPal fees.

Fore sale - bought them but ended up never needing them.

New never used 2” offset scope mount. 1.59” Height. SOLD.

Desert Precision Gunworks RimX build with their new bolt mod to run RimX/Vudoo/L3I mags.

24” Krieger 1.20” straight barrel. BixnAndy Tacsport ProX single stage trigger with flat shoe and low sear.

Will come with original bolt and modded bolt. ($500 upgrade). Round count is unknown but I just got it back from DPG last week and everything was gone through.

Hammered at the Lapua test center but I have not shot it since the bolt/barrel mod which I wouldn’t imagine would change anything.

$2350 shipped to your FFL. Payment via PayPal F&F, Zelle, or Venmo.

Does anyone use the MPA BA scope rings? Not a lot of feedback (especially negative).

Selling Area 419 Rail Changer X with OG game changer bag.

$SOLD shipped

Are 400modbb barrels worth the extra $250 over the cost of a 416 blank from bartlein?
Trying to procure a 25 cal 400modbb blank for a potential build in the near future and curious if the juice is worth the squeeze in terms of barrel life increase.

Hopefully this is the correct place to post this question. I've seen precision shooting with an AR10 discuss3d here and on other forums and I've seen mention of having to shoot gas guns differently than a bolt gun. Can anyone point me to some videos or literature that discuss this?

I've been getting somewhat lackluster groupings with my 20" AR10 with Proof Research barrel, and I can't figure out if it's me, the barrel, haven't found the right ammo yet, or too high expectations.

I've tried Hornady ELD-M, Federal Gold Mdeal Match(with SMK and Berger projos), Nosler match. All are bringing out 1.5-2 MOA.

There's a very big possibility that it's a me problem, but if im not shooting the gun correctly I'd rather read or see the right way to shoot a gas gun than waste a shit load of expensive ammo trying to figure it out.

2x Surefire 3 prong 5/8 x 24

75 shipped Lower 48.

1x sold with shims and wrench.

1 available

shim sets are available for 10$ online.

Just a super basic build I tossed together for my son. Nothing special about it. Had maybe 50 rounds through it. Trying to put a 22 creedmoor bolt gun for him for coyote hunting.

Psa lower
Aero upper
Tool craft bcg
Grendal hunter handguard
Satern 18” 1-8 T barrel
CMC Triggers Single Stage 2-2.5lb pull
Magpul stock and grip
Strike industries comp
Superlative adjustable gas block



Video of the upper
Login to view embedded media Login to view embedded media
asking $600 shipped.
Not against splitting up

Burris xtr3, 3.3-18x50. SCR mil reticle non illuminated. Scope is in excellent condition. Minor scratch on the Burris logo on the ocular piece. See pics. Comes in factory box with windage know, scope shade, scope caps, Burris throw lever and Burris level. $750 shipped. Happy to answer any questions or send more pics. Just pm me. PayPal f&f

Any reviews ?

Hello All,

I have a Ruger Gunsite Scout 450 Bushmaster up for sale. This unit has been a tac driver for me the past couple seasons. I want to recycle the funds off this rifle and build a custom bolt gun for next years whitetail season in the midwest. It shoots the Hornady factory ammo well, the Federal factory ammo not as well. Right now I shoot the 221gr Hammers at 2440 fps out of it. Most accurate bullet Ive used thus far. Any questions please let me know. This is as used rifle, I don't beat up my stuff, but you will be able to see that the rifle has in fact gone in and out of the woods.

Comes with everything pictured/listed
Factory box/paperwork
3 length of pull spacers
2 sets of 1" scope rings, 1 high, 1 medium. The medium are brand new and came with the rifle. I didnt know I had them until grabbing the box to take pics
Thread protector
Muzzle Break
Front Sight post
Action Lock
Rifle w/ 3 round Ruger branded AICS pattern polymer mag

Asking $800 net shipped my FFL to your FFL

Long story made short. Purchased an Annie Induction Annealer. Used it once with about 200 Cases. No issues and was impressed as all Hell!!! Forward about a month later, and went top use it again. Got about 10 cases into the annealing process and the Annie popped a breaker. Reset the annealer, and it popped again. Tried a few more times, and yup. Kept popping the breaker. E-mailed customer service. They got back to me ASAP. Ship it back to us and we will fix it. That's where it gets ugly. Again, long story short. They have now had the unit for over 2 months. I have a signed receipt for delivery. After 1 month of them receiving the unit, I emailed them and asked for an update. My bad they said. We will fix it and have it mailed back to you tomorrow. Well, now my Induction Annealer has been sitting on a shelf with a shipping label attached to it since Nov. 7th. Waiting for them to hand it off to USPS. And it feels like games are being played for some reason. Fluxeon. Stay Away. Sucks as I have a match coming up and after annealing with the Annie, I am going to have to go old school and anneal with propane.
Here's a question. If I was to purchase an AMP Annealer, and things go wrong, would I have to mail it back to New Zealand to get it fixed or do they have a US outfit to fix them?

APRS3 reticle. Scope body does have some marks on it but glass is clean.
$330 shipped.

Im always coming on here asking for advice on gear… Ive got a Sako TRG 22 in 6.5 and a Steiner T5XI 5-25x56… It is a nice optic and Im considering putting it on my TRG- Given geographic constraints- I really dont see myself pushing 1000-1100 yards. However, I find myself wanting to upgrade and have about $800 freed up. Assuming I sell my T5 for $1300-$1500 (which seems to be what they go for)- I’d have about $2000-$2300 to play with. I am a Steiner fanboy- is the T6XI worth it over the T5- should I consider a used M7- or perhaps go down the NF route…. Ive also looked at some used S&B PMII models. But, I could instead invest the money into a spuhr mount to go with my T5 etc….

Also I should add that my T5 does not appear to have the chromatic issues or adjustment knob related issues that others did.

Brand new in the package. Noveske clamp on switchblock for rifle length gas system. $150 shipped

$70 net shipped, barely used. Any questions let me know.

Accuracy Solutions BipodeXt MSR Pro Rifle Stabilizer and Queen's MINI Equalizer Kit. Comes with ARCA Swiss and Picatinny attachments
$450 shipped

Want to sell 100pcs of hornady 6.5 SAUM brass. Moving dad’s gun to 6.5 PRC/SI to consolidate everything. Asking $100 shipped. PayPal or Venmo is fine.

Manners PRS2
Mini chassis
Carbon elite
Full length 14in arca with barricade stop
SA REM 700 footprint.

Has few knicks from rubbing elbows in the safe. $1100 obo

Don’t have my 338 any more so no reason for these to be on my bench

48- berger 300gr OTM - $50 shipped
29- Barnes 210 gr ttsx- $30 shipped
Or
buy both boxes for $75 shipped

Traded for
22 cal
Sierra 60 or 69 tmk
Berger 60 gr varmint
Hornady 80gr eldx
Hornady 62 gr eld-vt
Anything else just offer worst I’ll say is no.

Has anyone here trained at Rifles Only? I’m into precision shooting and have been practicing on my own because I want to participate in PRS competitions. One of my friends keeps recommending that I take a formal training course. He took his at K&M Shooting Complex in Tennessee, but it’s too far for me. I live in Houston, so I’m considering Rifles Only down in Kingsville, Texas. The price seems reasonable, and it’s not too far, so I think it’s worth checking out.

Has anyone here taken their Precision Rifle Course I & II? What’s your opinion? It seems pretty popular—they’ve got a lot of podcasts and some good reviews. Would love to hear your thoughts!