I have a once used MDT grand bipod for sale . Looking at $180,00 sipped to your door , Will take PP/FF check or usps money order.

Bowl for INNOREL RT90C - SOLD shipped

Nightforce A121: Angle Degree Indicator w/mount

Never shot. $125 shipped


Paypal/Venmo/Zelle

Defiance Ruckus Hunter II short action
Magnum bolt with deep flutes and anti handle
Standard bolt with shallow flutes
Bartlein 6.5 PRC #14 26" carbon prefit done by Altus
~40 rounds on it
Brake not included, just protecting the threads


$2300 shipped
$850 for the barrel

pp f&f/venmo or buyer covers fees.

Up for sale slightly used less than 2 boxes fired through it in like new condition​

---

$1375 + shipping and insurance on you.​

Features of the Havak Professional Hunter PH2 Rifle :​

• Seekins Precision HAVAK Action
• Newly Designed Carbon Composite Stock
• Spiral Fluted Barrel with 5/8x24 Threading
• Detachable magazine system
• 20 MOA Picatinny Rail with (5) 8-32 screws
• MagPul 5 Round PMAG for 6.5 Creedmoor, 6 Creedmoor, and .308 Winchester
• Carbon Fiber 3 Round Magazine for 6.5 PRC, .300 Win Mag, and 28 Nosler
• Bead Blasted finish
• 4 locking lugs with 90 degree bolt throw
• Full diameter bolt body
• Integrated recoil lug as well as a lug for top Picatinny rail
• Helical Extraction Cam
• M16 style extractor

---

Specifications

• Caliber:6mm Creedmoor
• Weight:6.9 lbs.
• Action:Bolt Action
• Trigger:TriggerTech Trigger
• Rifle Barrel Length:24"
• Rifle Barrel Twist:1:8"
• Barrel Thread Pitch5/8x24
• Rifle Stock:Carbon Composite
• Scope Mount:20 MOA Picatinny Rail with (5) 8-32 screws
• Magazines Included1) 5 Round
• Iron SightsNo
• Caliber or Gauge:6.5 Creedmoor
• HandednessRight Hand

Razor gen III 1-10, mrad, in scalarworks 1.93 mount
$1,750

Sold my SCAR and my 2010 project. Have these left over and I need to clean out my garage.
5 x XM2010 .300 win mag mags. Some wear on them. They all feed fine. 300 OBO for all of them

6 x SCAR 20 mags. For .308/6.5. Brand new still have storage wrapping on them. 250 OBO for all 6

The Kit V2 with Hog Saddles new Turtle Head 1.4 ball head. Took it out to compare to my RRS and I still like my RRS better. It’s basically brand new. No dings, scratches anything. Everything works like it should. Definitely a tripod setup that works well I just can’t part with my RRS.

$850 OBO

For sale is an excellent condition LMT MARS-LS Lower.

Comes with geissele Flat Trigger
Comes with geissele H3 Buffer
Comes wht SBA3 pistol brace
Radian Ambi Talon Safety Selector

*this item was registered NFA as a SBR. I have removed it from the NFA (i have the paperwork showing the removal).
* this is just a lower now
My trust name is engraved (see photos)

Asking $950 OBO shipped from me to your FFL. If your FFL requires it from an FFL then add $40 to the price.

Haven't seen a post for these yet. Newly released aftermarket AW magazines from Gray Ops.

- CNC from billet
- 12 rnds
- Two pieces for disassembly and cleaning
- Adjustable mag catch
- Windows to see 10 and 12 rnds loaded
- Only for BR size cartridges at the moment

Login to view embedded media

So looks like I have settled on a Terminus Zeus full tenon. Since I’m new to the whole world. I’m looking at prefits. I’ll bet getting a 223 Wylde and 6.5. Anyone in particular want to look at?

Looks like TS and Preferred have been popular.

I learned a lot from the last post I did so figured I would cast my net.

I will be having a 22 creed, 22–250 or 20 practical built as a dedicated coyote rifle. I'd like to have a relatively short barrel so it's still handy with a suppressor on it. Are any of these more conducive to a short barrel than the rest? I was thinking 18 to 20" if I can get away with it

I'd also consider a 6creed/243 if somebody can convince me that it won't blow big holes in the coyotes. I prefer no exits at all.

Advice requested on last minute reconsiderations regarding the chassis selection for an MPA PMR rifle on order: Matrix Pro II vs the Vanquish.

I chose the latest iteration of the Matrix, the Pro II, but now I am thinking of changing the work order I sent to MPA to specify the Vanquish instead. Would like to know thoughts from those who have used either, and especially those who have used both.

At this point 3 considerations steer me toward the Vanquish:

1) The Vanq has a more manageable forend than the mile wide Matrix Pro II.

2) Out of the box, the Vanq has more mass in the forend. That may possibly save me from having to add additional weights out front, keeping the overall rifle weight down.

3) I like running an over the bore bipod when shooting non PRS from a bench or ELR prone, which necessitates pic rail attachment on the segments that fit onto the top of the forend of the chassis, over the barrel. That is not an
option for the segments that fit the Matrix Pro II, as far as I can tell, while it is for the Vanquish.

Thoughts, anyone? Any advice much appreciated. I will be using the rifle for some PRS along with general ELR fun time shooting. Maybe kill a deer or hog or coyote too.

I have had a few requests to print something to store extra AR uppers vertically. Prices are shipped TYD and I will provide tracking once shipped.

Two options for both an Ar15 and AR10. One is the low profile AR Hanger that provides just enough room to hang the upper. The High profile hanger will accommodate most bipods of the Harris style or smaller along with short front grips. The Ar10 type will work with DPMS style Ar10's. This will come with two undersized clevis pins that you will slide into the upper holes to lock them in place. They are easily removed when you want to remove it from the wall. Then just place the clevis pins into the two holes in the middle of the hanger. This mounts to the wall via 4 #8 Screws (not included).

Colors can be red or black, if you don't specify I will ship what I have on hand. Custom colors possible upon request.

Specify which model you would like please!


$35 TYD AR15 Upper Hanger Low Profile: Holds AR15 uppers close to the wall. Nothing can be mounted on the bottom of the handguard.
$40 TYD AR15 Upper Hanger High Profile: Holds the AR15 upper far enough from the wall to allow short handgrips and Harris size/style bipods to remain attached.
$35 TYD AR10 Upper Hanger Low Profile: Holds DPMS style AR10 uppers close to the wall. Nothing can be mounted on the bottom of the handguard.
$40 TYD AR10 Upper Hanger High Profile : Holds the DPMS style AR10 upper far enough from the wall to allow short handgrips and Harris size/style bipods to remain attached.

Items Other members have requested.

Grey Ops 12rnd AW BR/dasher mag

$140

No trades

Printed up a holder for my worlds finest trimmers. If anybody would be interested in one send me a PM. Holds 3 and one allen wrench. $25 TYD. It can be mounted to the wall or if you want you can remove the wall mount from the base via 3 screws and sit it on a shelf.

Other items people have requested:

I printed these shell holder organizers up for a few people and they worked well. If anybody could use one PM me.
Red or black. If not specified I will ship what I have on hand.
$20 TYD Shell holder rack for 18 shell holders: Holds 18 shell holders plus a few allen wrenches and can be mounted to the wall or sit on a shelf/bench.
$30 TYD Shell holder rack for 18 shell holders with cover: Holds 18 shell holders with a travel cover to keep them safe for anybody that uses them at the range or can just be used to cover on the bench.
$30 TYD Shell Holder Rack 30: Holds 30 shell holders for anybody with way too many damn shell holders. Can be mounted on the bench or wall.

Other items people have requested:

I mean, it is quite delicious.

Denver steaks from a sub-primal chuck roll I recently processed. Basted in butter, garlic, and herbs. Pan-seared blue-rare, like a good steak should be.

Sour Dough Balistics

Exactly what it sounds like.
Less components than reloading and thousands of recipies to make a loaf.

Didn't want to stomp on nom nom nom thread in Maggie's so here we go.

$60 shipped

I’m having AB Quantum and Kestrel 5700 elite x issues… it’s probably operator issues.

Tall target test good, I have a Doppler for my mv, firmware is good, and my custom drag model is off by a few tenths at distance (800-1000). In the app I just correct the ballistics using cdf because I know my mv is good. Easy peasy and works everytime no problem.
I have had a kestrel for a while but never used it but recently decided I was decent enough to possibly get some use out of it. Send my profile to the kestrel and it’s off by .3 mil at 1000. It’s like my cdf didn’t transfer to the kestrel? Also I noticed that even when I turn the pin off and up my Bluetooth the environmentals don’t update in my phone app. I have to manually update them.

I’ve been able to get the kestrel really close to my app solutions by creating a new profile, using g7, and then manipulating mv (inside 600yds) or BC (600+). I don’t like this because what if I go shoot in the mountains and have a velocity change? I can’t put in the actual mv because I already had to play with the actual mv to get the kestrel tried. The app is so easy… I must be doing something wrong in the kestrel? Is there a way to manually enter cdf in kestrel with the custom drag curve? Help!!!

Catch and Release. Found a Gold one so I don’t need this one anymore. Chad in Stainless steel .243 with No tuner $450 plus shipping

asking here cause i got a bolt gun. it shoots GMM very well out to 600. am asking if the TRU would be an (emergency only) option for hunting. the description given is that it has superior penetration and expansion which is it's reason to exist i read. planning on saving some 308 for SHTF and just wondering about successful dual use. at one time many here were advocating GMM for deer,hogs etc;game up to about 300lbs. i never quite liked that idea except in maybe an emergency where a CNS hit was doable. i would expect the TRU to be about as accurate. ie a reliable 1 MOA out to 600,reliably take game out to say 200. anybody know anything on this?

Hey all,

As title states, how do you all clean the area right before the chamber and even the chamber too?

I keep getting chunks of carbon making their way into the chamber and then they fall to the open area before the chamber. I first noticed this when I couldn't get the bolt closed on a live round. It's almost like the round was too big or long. After a minor inspection, I noticed the bolt face had black rocks.

My rod guide goes right up to the neck. So when the patch comes out of the guide, it can't clean the chamber. I have slid the guide back to allow the patch to come out before and open up. I spin around a bit and then drive it forward all the way. But I still have a million little carbon rocks and brass shavings. These are causing issues with not allowing me to close the bolt properly. My fireformed cases are also coming put with deformities due to carbon chunks getting jammed between the case and chamber wall.

Anyone else experience this? It's getting frustrating.



Also, I found these other things while I was in there. If anyone cares to know and tell me what it is I'm looking at, I'd appreciate it.



The 2nd picture in this group of 3 pictures is black fouling but deep down in the barrel. Maybe about halfway in the barrel that starts and goes out to the muzzle. The section before it has shiny rifling so I find this odd.

With how many carbon chunks I was getting in my chamber and bolt face, I thought I was going to have a major carbon ring but it didn't appear that way.

Thanks for any input.

Bix'N Andy Tac Sport single stage right handed Remington 700 trigger with flat shoe. VERY little use (kept as a backup and used for single range session to ensure function). I believe specs are adjustable from 4.5lbs down to 10oz. $250 shipped to lower 48, happy to quote shipping to other states/territories.

My other listings:

500 115gr DTAC Blems

Hawkins Tank 6mm Brake

Manners TCS Rem 700 SA RH

Minox MD 80 ZR with Reticle