I'm going to be attending a LE Basic
Sniper course. The packing list says to bring hide building supplies like veils, tacks, 550 cord, duct tape, pruning scissors, etc...
Does anyone have some other suggested items that would be helpful?
Thanks

Not going to use this rail after all. Just opened up package but never mounted. Asking $75 shipped PayPal F&F to lower 48.

I have (2) mk5 5-25 mil pr2 scopes for sale
Both have mpa mounts a 1.250 and 1.125, will sell with everything, or pull mounts and levels off, I have original front mount cap too. Let me know. Both have sunshade and original box
Only reason I’m selling is I upgraded to ZCO for NRL and PRS

1. 5-25 pr2 mil, 1.250 mpa mount, diving board, di precision windage knob, mpa top ring mount with level -SOLD

2. 5-25 pr2 mil, 1.125 mpa mount, mpa top ring with level, flat line ops bubble level, di precision windage knob -sold

Will make a killer deal if you buy both with everything

(NIB) M40A5 Stock Kit
(NIB) PGW (Gen 1 w/ shim)
(NIW) M24 Trigger

Will not split up. No trades or offers.

$2100 shipped

For trade. Larue LT10 lower with keymod upper. 18" PredatOBR barrel with PST gas block (port selector technology) and the xtraxn chamber. Lower has geissele ssae trigger.
(2) Larue mags
(2) Amend 2 mags

Scope is Leupold Mk5 3-18 Trmr reticle with leupold mount.

Looking to trade towards bolt guns.

Willing to include an upgraded cz 457 in krg chassis with 419 upgrades.

This thread will be dedicated to ZCO News and Updates so we can keep the members here of Sniper's Hide more easily updated. Simply subscribe to this thread and when we have any news or information we will post it here. Then new information doesn't require a separate post every time. The members here at Sniper's Hide have been outstanding and always supportive, so we'd like to try and give back in an easier manner for you to keep track of.

Also, if you have specific questions, feel free to ask in this thread as well. Thank you all for the huge support you have given us!

Most recently:
1. The new MPCT3 reticle has started shipping to our dealers and first reports back from end users has been exceptional. See this thread here: https://www.snipershide.com/shooting/threads/mpct3-initial-impressions.6999843/

2. The members here have requested a sunshade, and the first batch of 56mm sunshades has also been sent out to dealers. MSRP on the sunshades is $60 and measures 3" long.

Brand new in box Zermatt Arms TL3 Long Action with magnum bolt face and a 30 MOA Base.

Ordered this from Zermatt about 4 months ago, it just came in and no longer need it.

$1,100 shipped to your FFL SPF

Vortex PST gen 2 3-15x44 MOA with EBR-7C Reticle.
Purchased new a couple months ago and only used on a 10/22. I shot a comp (300 rds) and determined it is not the right scope for what I want. So my loss is your gain.

Includes all factory items (sun shade) plus the Vortex lens caps.

$700 shipped CONUS

Like the title states
Im in the market for a stock for my T3X
6.5 PRC
Carbon fiber
Cheek riser
Under 3lb
Quality is a must

Manners,McMillan,Greyboe,Hnt 26 ,Rokstock

Let me know what ya have

I have 650 or so Berger 7mm 180g hybrids, 6 boxes were unopened until the cardboard box bottom broke and I dropped them on the garage floor.

Looking to trad for 500 25cal 135g hybrids or 500 6mm 109g hybrids or

SOLD

Hey guys,
I have a 20" 1/12 twist barrel. Will it stabilize a 155 Lapua scenar or am I totally off base here.
Correct me if Im wrong but isnt the scenar longer than a typical 155 grain bullet? Would I need a faster twist?
I am shooting 168 grain to 800yds no problem but I would like to push it to 1000yds. I tried 175 grain but
my rifle doesnt like it at all, 1.3" groups at 100yds.

Just a new guy checking in.

I’ll spend a lot of time lurking in the background. I am most interested in the reloading board, but I’m sure I’ll find my way to other parts of the forums eventually. I’m fairly new to reloading, I’m going a little crazy trying to figure out my mistakes and how to correct them. I’m happy to be here and look forward to gaining more knowledge.

I saw a quote from one of the members last night that hit home. “Take your loss. That’s the cost of education”.

You asked, and we listened! Our giveaways are now open to our online customers! As a valued part of the EuroOptic community, we're excited
to bring these opportunities to you, no matter where you shop from.

We are holding a sweepstakes with over $65,000 worth of gear to giveaway! Here are the detail to enter!

Brand new never fired. 3 of the 4 still have the cardboard sleeve around them the 4th my daughter got a hold of.

I have (4) 100 ct boxes of the 6.5x47 OCD brass. I will sell all 400 for 520 bucks shipped.

Messages here are fine, but the best way is to email me at [email protected]

Ballistic Advantage G19 barrel, bronze in color. Around 200rds through it. Threaded to 1/2x28. I bought an Agency G19 and don’t need another Gucci Glock anymore. So this one has to go. Agency trigger isn’t available.

$115 shipped. Or pickup in Columbus, GA.

Interesting.

Mini pro plate and bag $300 shipped in great condition

Like the post says I’m looking to trade my impact 737r barreled action (never fired, never mounted) with a 22in proof carbon in 6.5cm. For a terminus Zeus barreled action with either 6.5cm or 308 barrel.

Anyone know if this rmr mount will direct mount onto the front ring ? (They sell 35 and 45* adapters and say nothing about mounting on ring )

Want to workout a trade for either shotgun.

I have a Staccato XC fired approximately 400 rounds. It has a 507 comp ronin, 4 20 round magazines, 2 17 round magazines, and a Trex arms holster (before the company turned to trash).

Like New Vortex Razor Gen II E 1-6x24
Never ran drills, hunted or fielded past a quick zeroing. Chose to go a different route.

VMR-2 MOA Reticle

Includes the following:
Badger Ordnance 1.70” C.O.M.M Mount
Badger Ordnance ARC Ring
Badger Ordnance 45 Degree J-Arm
Badger Ordnance J-Arm RMR plate
Subrev Throw Lever

$1400 TYD. I’ll cover shipping, Insurance and PP fees.

Was leveled and mounted using Badger Ordnance reticle level Jig. Screws torqued with fix it sticks @ 18 in/lbs and indexed. Should be ready to go. Dot is super bright and new battery installed.

The other day I took a break from the holidays and rewatched the movie "Gettysburg" and since then have been doing a bit of research on Gen Longstreet. You don't need to be a Civil War buff to appreciate this post but regardless of how you feel about the Union/Confederacy or that part of history, he's really an interesting (to me at least) part of the Gettysburg story.

Just as a quick back story/catchup- Longstreet graduated from West Point in 1842. By all accounts he was far from a model cadet. He had a history of racking up demerits and performing poorly in his studies. The records that I've found thus far was in 1842, 56 individuals graduated from West Point and Longstreet (being among them) was ranked... 54th in his class.

Despite his academic standings, it seems that he was still popular amongst his fellow classmates (perhaps he was the class clown?) and among the friendships he cultivated during his years at West Point, one of which happened to be Ulysses S. Grant who graduated a year later in 1843. Again- you don't need to be a historian but that in itself is rather interesting.

Skipping over a decade or two- despite graduating at the absolute bottom of his class in 1842, he quickly advanced through the officer ranks and once the Civil War broke out he eventually became Gen Robert E. Lee's "right hand man" and most trusted General and advisor by Lee's own accounts.


Ok- now that we're all caught up- back to Gettysburg. Knowing most folks here aren't history buffs and wanting to be concise- during the battle Gen Lee was in command with Longstreet as the #2. One could honestly devote their entire lives to studying just this one battle but Lee & Longstreet's discussions are well documented and they frankly were polar opposites of how to proceed.

The one part I'll mention on that topic is a part of the battle that I'm sure many folks have heard of (even if they're not fans of history themselves) and that's Pickett's charge on the 3rd day of the battle. Pickett's Charge is often used as a metaphor for futile (and foolish) endeavors even to today. But on the 3rd & final day of the battle at Gettysburg- I reckon many don't know that Longstreet publicly argued with Gen Lee against that decision and in front of their subordinates (this part is actually fairly well represented in the movie).

Another factoid of interest (to me) is that even though it's gone down into history as "Pickett's" charge, Pickett fell under Longstreet's command and he was given the task by General Lee to command the assault. Longstreet disagreed so adamantly with the order that when Pickett asked Longstreet to give the command, he could only nod in his direction (another part well documented).

(This is starting to get long so I'll break up the story here and continue on a future post).

-LD

Been working with my Bergara B-14 HMR 20inch factory barrel at 100 -300 yards. I’ve been shooting factory 140gr and 130 gr have used most of the brands available,I’ve had very good results with mosts so i was wondering about 120-129gr factory ammo I don’t see many reviews on the lighter 120-129gr.I understand most guys here are shooting well over 100yrds so 120gr is way to light for greater distances but would be interested in any results or input on the factory 120-129gr.

I'm wondering what magazines folks are running with their AW cut actions in AT-X aics chassis. Mile high support said only 6852 and 6955 magazines would function which doesn't seem correct.

From what I could read, many are just running AW mags (0726). Has anyone tried AX (6677) or AT-X optimized (29896BL) mags? I'm curious if they'd function different/better due to the front lip. I have an AW cut TL3 in 6.5cm I'd like to get an AT-X chassis for.

$20 shipped. Comes with free dry erase marker.