Desert Tech SRS-M2 in 6.5 creedmoor. Less than 100rds fired. Fantastic trigger in this one. Perfect condition. Torque wrench for barrel changes included.

$4500 $4150 shipped- chassis, 26” 6.5 conversion kit, mag, torque wrench.
(scope, mount & bipod not included in price but can work a package deal)

Will meet FTF near the Austin, Houston, Corpus, San Antonio areas

Benelli M2
I built this for 3 gun but never got into it.
23" barrel cut down from 28" and rethreaded for Winchester chokes-local shotgun smith did this work
Nordic Components mag tube mag tube clamp, and charging handle
the carrier has been lightened and hard chromed-can't recall who did that
the lifter has been welded and plated by C-Rums
the loading port has been opened up for easier reloading
$1750 shipped to your FFL

Brand new MDT Chucky peanut waxed canvas shooting bag with heavy glass fill. Retails for $109, asking $80 shipped obo

Selling my MPA Curtis Valor barreled action. Action and barrel have 300 rounds through it. Bought it recently from here just don’t have time to shoot it.
Barrel is 26” chambered in 6.5 creedmoor
Also comes with MPA DN5 brake
$1400 shipped to your FFL

Have a custom 6x284. Shoots lights out 75 vmax at 3700 FPS. Hangs up on the 4th round and won’t chamber, the bolt slides right over the 4th round, using MDT 10 Rnd 308 mag, my question is do I need to adjust the magazine feed lip? Or try a 5 round mag?

Mixed headstamped brass

50 new unfired Hornady

Maybe a couple hundred mixed headstamped other brass, don't have an exact count. Once fired, deprived but not prepped. Dropped the caliber so don't need anymore

100 shipped

Anyone have an older hornady dies that would like to upgrade to their click adjust micrometer seating stem? I’d like to trade their new style seating stem (on the left) for one like that’s on the right. Great upgrade just doesn’t work in my press for the cartridge I’m loading. If anyone has a few old style laying around I’d buy those as well.

Good afternoon fellas! I've been eyeballing the Guide TB630 LRF and Athlon Cronus 35CL-640 for Coyote hunting and shooting heat treated steel for night shoots. Just by looking at them I can tell they are both very similarly manufactured but the specs vary a bit. It looks like the Guide TB630 has a 1920x1080 pixel display while the Athlon Cronus has a 1280x960 resolution. Now with the sensor resolution being equal (640x512 @ 12 microns) am I right in assuming that the 1920x1080 screen will be a lot better when optically zooming in? I'm still fairly new to thermal, I have a BAE UTM that I love and works great but I want to buy another clip on. Thanks in advance for any input!

Like new Hawkins 30mm low mount rings I have 2 sets available! $135 each shipped lower 48 only. Cross posted

I posted a thread a few months ago but thought I'd start a new thread regarding going from a 1-8 ATACR to a 3-18 scope for the tactical games. For reference I'm 55 and the eyesight ain't what it used to be. We typically shoot most of our stages with rifle anywhere from 50-100/200 yards and a couple stages out to 300-600. We also typically have one 2 gun type stage each day so an offset red dot is needed. All this varies per competition. A lot of guys have started going up to the 18x range with an offset red dot. Precision is a paramount as each miss is a 10 second penalty added to your total workout time. Advantages are you can see your target better and see your misses. With an 8x it's hard to tell if I'm missing and/or where I'm missing at longer distances. Ability to dial on certain stages is a nice option but most of the time I'll use holdovers.

As mentioned, I have an ATACR 1-8 and just bought an Athlon Helos 2-12 to try out. I like the Helos and the reticle but worried about durability and 12x. Because if 12x is nice 18x has to be nicer. lol


I think I have it narrowed dow to a few options:

Nightforce NX8 2.5-20
Leupold Mark 5hd 3.6-18
Burris XTRIII 3.3-18

Nightforce-
Things I like:
Form factor and weight
30mm tube (I have mounts already)
Durability
20x (although I probably won't go this high)
FOV is good
Illumination

Things I potentially don't like:
Tight eye box
No locking elevation turrets.

Leupold-
Things I like:
Form factor and weight
Durability
PR2 reticle
Locking elevation turrets
Proven- Elite winner uses this along with several others

Things I don't like:
Cost- I always feel like Leupold is overpriced.
35mm tube (have to buy another mount).
FOV is small
No illumination (extra cost and not available on PR2)

Burris-
Things I like:
Form factor and weight (not shortest or lightest but still acceptable).
SCR 2 reticle- it might be a little thin but I like the overall form factor.
FOV is good
Illumination and T illumination at center of reticle
Cost- almost half of the other scopes

Things I don't like: Durability?- not sure if it's durable enough for this type of competition
Turrets?- I've heard some complaints about these
Locking turrets?- I'm not sure if this has locking turrets or not
34mm tube- I don't have an extra mount for this but lower cost makes up for it


Any thoughts on these scopes for these types of competitions is appreciated. Or are there other options I've potentially missed?

Thanks in advance!

Selling my beautiful bolt action setup. A Defiance Deviant Action with Crontrolled Feed (Mauser) Bolt. Paired with a Bartlein 22” Barrel Rem Varm / Swndero profile, and a Timney trigger. Only 160 Rounds through it. Shoots extremely well!! I had the action DLC Coated and the bolt plus inside of action polished. Ready for the chassis of your choosing to have an amazing setup. Rifle never disappointed, I’m just going a different direction and freeing up some space. Included is 1 Accurate Mag AICS metal magazine. Muzzle break IS NOT included. $1850 Shipped. Message with questions!

Two Vets tripods 55mm dual tension ball head with Sunwayfoto SDC-75 arca/pic dual clamp. Has some use and dirt on the ball head, the dual clamp is brand new.

Asking $190 shipped.

ACE tunable muzzle brake, .30 cal. Excellent condition, maybe 75-80 rounds through it. $90.00 shipped in CONUS.

LaRue MBT2S 2 stage flat, skeleton trigger. $85

Sold for $1,300.

100% off thunderbeast suppressor cert.

Brand new in the box.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$240

Take-off from a Geissele GFR 6ARC rifle. Clean, like-new
5/8x24 thread, 6mm
Per Geissele, it is nanoweapon-coated
Additional from the website:


The Flash Hider-QD 6 is designed to mitigate flash when unsuppressed.
Muzzle device length is 2.3 inches, length added to barrel is 1.7 inches (on barrels with 0.6" threads)
The Flash Hider-QD 6 is compatible with HX-QD series (6k, 762, 762 Ti and Magnum Ti) and FLOW series (6k and 762 Ti) suppressors. This flash hider is only compatible with VENTUM series suppressors when combined with the HUX HUB Adapter.

Asking $140 shipped

As a quick backstory: I was doing some amateur gunsmithing on my beautiful kitchen table working on a recent 1911 acquisition. Actually, the fruits of that effort can be found in this thread:


As I was channeling my inner Bill Wilson and making magic happen to my new pistol, my wife made a comment about putting a mat down to protect the table. I classically responded with something along the lines of "I'm not an idiot/I know what I'm doing".

Whelp- as you can foretell, my punch slipped while putting the guts in the mainspring housing (good lord there's a lot of tension stored in that spring) and I put a perfectly round dent in our beautiful maplewood kitchen table. Ok, ok- I put two perfectly round dent(s) in our beautiful maplewood kitchen table (but who's counting).

Naturally I was smart enough to act quickly and throw a new tablecloth on the the table after finishing my gunsmithing business but I was left with 'evidence' of my wife being right & apparently supporting that I am in fact an idiot.

So maybe this is common knowledge but I researched online for suggestions to 'fix' it. I came across a suggestion where I took a thick shop towel and folded it up after drenching it with scalding hot water and placing the towel directly over my... transgressions I'll call it. I then put a dry kitchen towel above it.

Well dang- that actually worked and helped raise the dents surprisingly well. It's not 100% but certainly made a measurable difference.

So wrapping things up here- if you find you accidentally proved your wife right and jacked up your table, maybe try the hot rag trick.

-LD

Selling my used short bridge for the AI-ATX and ATX aics chassis. Red color. Used in one match but mounted before that.

$175 shipped obo. PayPal ff, Venmo, cashapp.

Nightforce ATACR 7-35 with FFP Mil-C reticle. Excellent condition, tracking and glass are perfect. Comes in a NF box from a different scope.

$2880 shipped TYD
***SPF***

I recently put together an outlier custom rifle and I got a savage 110 for it and I really dislike the savage action. I have been learning on a ruger rpr, and compared to the ruger my savage action is really bad. Maybe it's just the one I got, but the eject is horrible and it feels loose, I really have to wrestle with it. Looking for suggestions for a replacement action. I've seen posts say zermatt has savage actions, I thought all the top name clones were all rem 700's. If you can link the exact action or the exact part UPC I should be looking for that would be very much appreciated.

Zero Compromise 5-27 MPCT3 reticle. 15 mil locking elevation turret. Spuhr 0 MOA 36mm mount. Optic is wrapped in a Dangerfield Arms protective fabric wrap. Also has flip up caps on both ends. Glass and body are in excellent shape. $3500 shipped to your door.

Defiance Ruckus SA in 6.5CM. Proof carbon 24" barrel, EC tuner, Timney HIT trigger, MPA BA Comp SA chassis. Round count 250ish.

Catch and release, barreled action was purchased on the Hide. Decided to go another direction and buy a 6.5CM barrel for my SL setup.

Scope and rings are not included and are not for sale.


Barreled action $1750.
***SOLD*** MPA BA Comp $650.
EC tuner $150
Timney HIT $150

All prices are shipped.

$550.00 barrel only
$799.00 for barrel/new bolt and new magazine - will not sell bolt/mag without barrel
shipped and insured lower 48
Zelle or check only

20 rds through DTA factory fluted !:8 twist threaded 5/8x24 barrel using 147ELDM factory loads. Great shooter just too many barrels for my M2 and Covert.

Brake not included

Im going to give NRL Hunter a shot in a couple months, and need a short action TL3 prefit.

All my barrels are 16.5-18" for hunting suppressed and won't make power factor.

22-26" carbon fiber chambered in something greater than 6mm would be awesome.