Up for grabs is a *NEW UNUSED* Gen 2 Sphur Picatinny Scope rail. 20 MOA built in, has all original parts and never opened. SOLD

I've been making a couple revisions to my SPR and SPRecce, one of which is keeping some dope on the inside of the ocular covers again as a fall back option. In the past, I'd use some masking tape but this time I thought I'd make something "fancy". I know there are commercial options available but I didn't really like them so I took a little bit of column A and a little bit of column B to make something tailored to the two guns. Plus side is it also didn't cost me any money. I "laminated" them with clear packing tape and trimmed the tape so that it would catch on the inside of the cap to stay put. It's a bit janky but it works. I attached the template sheet in case anyone wants to use them, the larger one is 1.75" in diameter and the smaller one is 1.50" in diameter.

Hi, my name is Mark. I have been stalking for some time. Ready to become active. A friend and I are planning to do some prs matches this year. Will be posting my journey and undoubtedly asking many questions in the near future.

I really love the dimensions of the Gunrunner pack for hunting. I use the scabbard for a tripod and the top pocket for a game caller. The narrowness makes carrying a slung rifle and moving through thick bush great.

However I find the top loading only with drawstring and flap that attaches to the bottom flap very slow to open and close. You have to dig through or dump out the main compartment to get to anything at the bottom. Also I never use the butt flap. I find myself using the molle for extra pouches not to add more space but just to make things accessible.

I am considering an X1 Euro but don't really need the extra volume I just really like the multiple zip open compartments.

Are there any other comparable sized packs that easily store a tripod but are more compartmentalized with zippered pockets?

Hey 6Dasher shooters

I’m looking at jumping into the 6mm world and thinking 6Dasher could be my next calibre.

Asking the 6 dasher cohort if they have good experience feeding 6Dasher from .308 AICS pattern mags or whether it’s best to go with 6Dasher specific magazine? I’m involved with PRS style comps so a magazine reliability is important.

Thanks in advance

Hi- long time lurker, first time joiner. Looking forward to learning from y’all.

WTT/WTS:

Hornady: TAP Precision® .300 Winchester Magnum, 178gr ELD® Match​

4 2 x 200 round cases (same lot) - $350 per case Sold!
1 x 180 round partial case (same lot) - $300 Sold!


Trades: Looking for 6 ARC ammo, 6 creed ammo, Bartlein 6mm blanks (CF, MODBB), Proof CF 6mm Blanks, etc

Got out before the rain and ice . Been jonesing for a long scenic ride .

SOLD….250$…. Will send pic of code for you to use after payment

I've recently gone down a rabbit hole of a project I'm throwing money at. Selling the last (3) bricks of Lapua Center X for $500.00 shipped and insured.

Not interested in trades.

Payment via PayPal friends and family with no note.

Please do not ask me to ship where prohibited and know your local laws/regulations.

The ammo purge of stuff I'm no longer using continues:

I've got a case of Federal Gold Metal Match 260 Remington 142 SMK, $330 shipped

Trades: 6ARC or 6CM Ammo, 6mm projectiles, whatever...

I have two like-new Harris bipods that I've owned for several years and never used. They've been attached to rifles in my safe, but never been outside of my house. No marks, dents, rust, etc. I've converted my rifles from sling-stud to Picatinny attachment and won't be able to use these.

1) SOLD Harris bipod model 1A2-L (pictured on the left). Extends 9"-13", smooth legs, non-swiveling, sling-stud attachment. Made in USA. $70 shipped.

2) SOLD Harris bipod model S-BR. Extends 6"-9", smooth legs, swivels (tilts) to compensate for uneven terrain, solid base, sling-stud attachment. Made in USA. $95 shipped.

Payment via PayPal FF or USPS MO. PM me if interested.

ISO Spuhr 4802 or 4602

Hey guys, I'm converting my mid-length gas system 16-in AR to run an 18-in barrel with a rifle length gas system. I'm no expert at this so I want to run this by you guys to make sure I'm on the right track.

I was doing a little reading last night and it sounds like I may be able to get away with my original buffer and spring and just tune it with a adjustable gas block? I was going to run the riflespeed adjustable gas block. Then if there's any trouble I could always mess with the buffer weights. Does it sound right?

Lightly used Vortex Razor AMG 6-24x with the floating dot EBR7b reticle. Excellent condition other than some slight marring on the elevation turret cap.

Turrets, glass and parallax all flawless.

Comes with original packaging, l Tec tool, caps, sunshade, mkm throw lever and level.

$1550 shipped and insured
PayPal F&F, Venmo or Zelle

Would trade for a ZCO 4-20x or NX8 4-32x mil c

Hi-My names Aaron, long time lurker and obsessive learner (this site is great for that.)

Took a 30 year break from shooting rifles on the regular to raise a family and start and sell some businesses. Had to sacrifice most of my personal obsessionsexcept fly fishing and golf. I’m now ready to spend more time doing the things I loved as a younger man. PRS is at the top of my list.

Thanks in advance for your patience for any “new-guy” questions.

Selling a Premier Heritage 3-15x50 LT scope with illuminated Gen 2 mil dot reticle. The scope is in great condition, no issues and includes box, manual and original Premier caps. Glass is phenomenal.

$2000 shipping included. PayPal FF preferred but can accept others if need be. If you have any other questions or need more pics/video, let me know.

No trades.

Anyone on here designing and 3D printing that could make me a box to store batteries for night hunting? I’d like it to be flat with a slide-off or hinged lid.

I’ve poked around here for a bit. I generally shoot to hunt but have some buddies interested in trying out NRL Hunter matches so maybe I’ll branch out.

The optics reviews on here have been so helpful for someone like me that’s inexperienced. Looking forward to learning more!

Manners CZ 457 stock

Ambidextrous (professionally milled to accept left handed actions)

Only used maybe three times.

$760 +

PPFF, Venmo Gift, Zelle

*SOLD

WTS: Triggertech Special Remington 700 flat face trigger. Without bolt release. Lightly used. $175 shipped. Venmo or paypal f/f.

Login to view embedded media
So Sonya is murdered in her house for invoking the name of Jesus - shot in the face multiple times by a cop who was in her house illegally.
The tax payers get to pay $10 million because the city kept a phycological nut case Brady lost officer on the payroll .

Seem it would be cheaper and less deadly just to fire pieces of shit before they commit murder on camera ?

Selling my SLR B36 large frame AR receiver set. Has the take down pins, mag release and bolt release installed.

Asking $300

So I have a Short Action Customs scope leveling base. That I mount my scope and spur mount to the base. The base is level as well as the spur mount. I put a plum line about 50 yards out in my yard. Now the scope reticle runs along the plum line but at the top of the reticle it looks like it’s on the center of the line and on the bottom of the reticle it looks like it’s on the left side of the line. Almost like a tiny Bit of an offset . I had to set it there so that when track my scope from zero to all the way, as far as it will track it stays on the line. Would that be more important or should I get the reticle to line up perfectly with the plum bob? Thanks Jimmy

Also, this is a brand tangent Theda 7 x 35, I would hope it’s tracking

Price includes shipping.

If paying by check, must clear before shipping. I have PayPal and Venmo ,you cover fee if you chose secure PayPal

I’d also be open to trading for 30 cal bullets around 200 grain
Or 7mm 162’s



Berger 7mm 195 1000 count

SOLD $525 SOLD

I can also break it up, 6 of the one lot for $325 shipped 4 of the other lot for $225 shipped



SOLD