Looking to sell my lightly used vortex razor UHD 10X42 binos to upgrade to NL Pures. Comes with original box and bino harness. Asking $1300 shipped.

Mint condition in the box with all accesories. SOLD

no trades

Turn key set up ready to go. I have a PVS14 in green phosphorous, gen 3 tube, refurbished by Night Vision Network. Does not have spec sheet but is a pretty clean tube. Perfect for an entry into the night vision world. Comes with Norotos rhino mount, 2 j-arms (1 is a Wilcox arm) and adjustable iris eyepiece. It will also come with the surplus bump helmet, with peltor installed on the arc rails. 3M gel ear cups have also been installed on the peltors and the comms wires are not cut.

Looking to get $3000 OBO, prefer F2F local (DFW, TX) but can work something out to ship if needed.

BNIB zeiss Conquest HD 15x56 Binoculars
Never used everything in the box like it should be. Don’t need them have other optics I use. 1550.00 PayPal or Venmo

I have eight that I was going to use on all of my rifles, but I ended up not using them. These were bought a few years ago and have just been sitting in the box. They are all brand new.

I am asking $175 each. Direct from LaRue, they are $275. It seems they changed the mount slightly and now call it the LT706. These have the 706.

From https://www.larue.com/products/harris-bipod-brm-s-and-lt706-qd-swivel-mount-combo/

Hey all,
After being prodded by some folks, we've attacked the problem of bipods. Here's the result. What we did is designed and machined a new built-in LT mount ... we cannibalize a Harris BRM-S ... merge it all together and VOILA' ... glorious bipod goodness. It tilts left and right, it's lighter by several ounces than the original, it's got our LT-QD stuff on it. It's easy to put on and take off. It's spine is a Harris. It's all good.

Hope it's to your liking, they are already in-the-field. ;-)
ML

Easy tension adjustability, in a lower-profile package.
This product combines the excellent swiveling Harris BRM-S 6"-9" bipod with an integral, low-profile LaRue QD lever mount. We have replaced the Harris OEM stud attachment base with a custom chassis... ruling-out the risk of the stud screw and grabber becoming loose. By doing so, we were able to lower the profile by roughly .25". A large knob on the rear provides easy leverage when adjusting swivel tension, especially when in the prone position. The bipod has 6-9" Legs (with leg notches). The notched legs provide a more positive lockup, keeping legs from collapsing unintentionally.

Our adjustable base attaches to any MIL-1913 picatinny rail. Complete with necessary hardware, tools and Instructions.

Unfired PSA AK 104 chambered in 7.62x39. Comes with PSA branded SLR solo handguard and gas tube. Hinged picatinny dustcover. Toolcraft front trunnion, bolt, & carrier. Linear comp, JMAC stock adapter with folding triangle brace, side rail optic mount, and ALG trigger. Will add better photos

$950 shipped

SOLD $200 - Nightforce Ultralight Unimount - 1.5" height, 20 MOA, 34mm

$75 - Primary Arms GLx - 34mm, 20 MOA

SOLD $75 - Vortex 30mm - 2" extension

Proof Research 6 Creed pre fit. Has a few scratches just from laying around but has never been used. $400

Bartlein 22GT pre fit new in box. Chambered by red beard gunworks. $500

MPA matrix pro includes bag rider
$830 shipped PayPal f/f

Did some research, eliminated 25 Creedmoor, 25 PRC and 25 Dasher. Couldn't decide between these last 2 calibers for shooting paper target or knocking steel plate around 1000-1300yards, wonder if I could get some suggestions to help me choose between these two.

Would be shooting in prone and single load most of the time, would try casual PRS match using 28inch barrel probably in 7-7.5twist with berger 135 hybrid.
Spot hit or miss is not that crucial if not shooting PRS, most of the PRS match I go to is around 500-700 so it should be a problem to see it.
I know 25GT is slower and has less case capacity to push it to higher speed and longer range than the 25x47 , but it has less recoil I believe.

For reloading components and tools, I know Alpha makes brass for both, seems only SAC has dies for both calibers, Forster only has dies for 25GT.
Reamer wise, Manson has 25x47 in stock, not sure who else makes good reamer apart from Alpha's legacy reamer.

Anything else I missed?

Getting out of the 6mm game for a while. Selling my hellfire match for $130 shipped. Comes with the barrel adapter.

Looking for an impact 308 barrel. Something I can shoot a bunch and won’t burn out my other barrels. Looking for something that is m24 contour or smaller (stock can’t fit larger than that) let me know what you have

EDIT: AS OF 8/8/24 THESE ARE RAW HEAT TREATED.

Finally have more of these in stock. This round is black nitride and not raw heat-treated. $85 each and I have both 1/2-28 and 5/8-24.

DM me here to purchase.


*Comparison picture next to TBAC courtesy of @MARLINLEVER

Does anyone have any experience with the Savage Ultralite Elite? I’m intrested in getting one in 6.5Creedmoor, but I can’t find much data or reviews on this rifle. I’m specifically curious about any issues with cycling the action.

Got this on a trade 15" quad rail looks to be a YHM or other no engraving marks.





$75 shipped to lower 48 or best offer
PP F&F, Venmo, CCMO.
Thanks for the look

Like new holosun HS512C with aftermarket cover.

$225 shipped

I'm the new guy now, getting into modern firearms and looking to have some fun on the mountain, I'm also thinking doing one the national hunting leagues events.

- AW cut Impact 737 with NEW unfired 308 Bolt (action has 200 rds of 223 on it) this is a newer Impact from their Oklahoma location. See photos for condition. TT Special single stage.

- $1425 shipped for action with new 308 bolt and TT special
- $750 shipped for MPA (SOLD)
- $850 shipped for 223 bolt/Proof barrel (SOLD)

Prices are to the lower 48 only. Your ffl must accept from an individual. PayPal or Venmo for payment.

I've got a NIB Phase 5 bolt catch.
Asking SOLD for the 223 and SOLD for the 308.
PM if interested
Thanks

I'm posting this as a copy from my post on the Long Range Hunting Forum here: https://www.longrangehunting.com/threads/zeiss-s5-3-6-18-mil.368742/

Picked this up from another forum member and put it on my 308 and put a couple hundred rounds down range. Great scope that lives up to the DLO recommendation, but have some other home expenses to cover so this has to go.

Comes with the both Tenebrax caps, original paperwork, original box, original bikini cover, Zeiss extension and extension cap.

Please see past feedback for reference and feel free to reach out with any questions.

$2000 shipped CONUS Paypal F&F

Seekins SP10 22" 6.5 CM, has Magpul PRS stock and Geissele SSA trigger. Has Noveske FH, two mags, soft case (foam has a tear inside)
total round count is 80, shoots amazing, $2199 shipped

Technically not ELR, but i think its more ELR than the general bolt forum.

I've been shooting F-class (1K) for a couple years. Doing my first build. I need "help" as in when I try and contact a smith for advice, I kinda get blown off. I'm not super into "I have to have action X", for instance Bugholes has a special on Terminus + barrel that seems like a slam dunk. But then there is getting the tuner, the stock (espeically the stock) and I get bogged down in choices. Whats the best way to get one of these guys to walk me through a buld. I know I want a 7PRCW (6.5 PRC necked up for 7mm bergers), but after that is a lot of trouble as I know I like a cheek riser, but apparently that doesn't go with the RAT system on stocks. I have no clue what trigger to hang, its a damn trigger. I'm still struggling with my front rest and rear bags, so stock choices are like "Pick One" (plus trying to make friends at the range: Use Bob he's great--except I can't get Bob to tell me what to build)

I really need advice on how to talk to a gunsmith to get them to help me finalize a build, already spent "months" researching and then when I said "lets get started" they dropped the stock thing on me (I haven't a clue what stock to get) and it derailed everything. I can get a barreled action, but once again, how do I get the tuner. (i got 10 left thumbs so trying to pillar bed an f-class gun as a first attempt seems stupid). I am seriously so frustrated that I might buy an origin+barrel slap it in a chassis and just take the shit that comes with that.

Watch the gun grabbers go after any rifle with a scope on it next because it’s a s****r r***e.

Login to view embedded media

1.8 ounces s35VN $145 TYD. $200 new. G10 handles. Great all in one knife for backcountry.

Vortex SE-1801 Strike Eagle 1-8x24 FFP New $599.99​

Vortex SE-1801 Strike Eagle 1-8x24 FFP Open Box $539.99​

Vortex SE-1801 Strike Eagle 1-8x24 FFP EBR-8 MOA

Optimize the versatility, functionality and quick-handling attributes of your AR-15 with the Strike Eagle 1-8x24.

cstactical.com

Vortex Strike Eagle 5-25x56 FFP new $799.99​

Vortex Strike Eagle 5-25x56 FFP open box $719.99​

Vortex Strike Eagle 5-25x56 FFP

CS Tactical - High Quality Optics including Zero Compromise Optics, ZCO, Zcompoptic, MRAD, 20 MOA. See our selection and get expert advice on the perfect scope for you.

cstactical.com