Anyone have any interest in a krg bravo for a 10/22 ? $200 pretty much new. Stealth grey

I've been on a quest for a while to find some budget friendly mounting solutions for a Secure It wall. The OE has limited options and are overpriced. Well today I was cruising the google machine and hit the jackpot. I thought it was worth sharing here because this source also makes mounting solutions for gallowtech, pegboards, flat walls, grid walls, etc. Tons of stuff here.

Definitely worth checking out - https://hammy3dprints.com/

.

Selling 350 once fired Lapua 6.5 PRC brass. Brasss has been cleaned, sized. $75 per hundred shipped. $245 shipped for the whole lot. Ammo boxes not included.

Hey guys with the Garmin chronograph. Mines been eating muzzle blast and has missed a few readings which hasn’t happened in the past. If I shake the housing real good I can hear a rattle almost like a small bb or something’s slightly loose inside. Can anybody shake theirs so I can figure out if this is normal? If you reload with bushings it sounds like shaking your sizing die and the free floating bushing inside rattle

So after many years, I finally paired my radian adac lower with a geissele 14.5 upper. Now I’m researching optics and mounts, mainly red dot/holos as I’m not too into lvpo or acogs. I want to have a useful home defense optic but be able to hit the range to run and gun and potentially run NV down the road. So I’m to the point it’s a buy once cry once deal. I’ve looked into the trijicon mro hd, holosun 503/515/530 and aems, multiple aimpoints, eotech and a few sig optics. As for mounts it seems like most run the scalarworks or unity mounts. Can anyone make other recommendations on some I’ve missed, add some photos of their similar setups or give me so opinions to narrow down my lists.

Found another in my bin...Brand new in the package. Asking $175 shipped. Link is below. Pics to follow.


View attachment 8502928

Have a pretty much like new in box SWR radius, that comes with all the factory goodies including instruction booklet, remote switch, lens cover, and the zero target, etc

I bought it new several years ago. Used it a few times. Placed back one the box.

Asking $850 shipped OBO

I have two Timney AR-15 Competition triggers I pulled from Seekins ARs.

Both are Timney Competition single stage, small pin, curved trigger, 3lb pull weight.

The one on the left I removed prior to firing the rifle and the one on the right had around 200 rounds on it.

$185 shipped for new one and $165 shipped for the slightly used one OBO.

Thanks

Ryan

Rim X ready 22lr barrel, Smithed by Tooter Meredith. It’s 1.25 straight cut to 25” and it’s 1:16 twist. It’s is used with around 3000 rounds. Muzzle is not threaded
$350 plus shipping

Trijicon SRO Sight Adjustable LED 5.0 MOA Red Dot (SRO3-C-2500003)

One left. I have 2 of these, both had been previously mounted on ZEV Glocks and I would estimate no more than 100 rounds fired for each.



They will ship with a new CR2032 battery in the hard case (not installed for safety).



Feel free to PM if any questions. Thanks!

Spuhr mount off a mark 5. 35mm tube. In very good shape 375 tyd

I am looking to get back into NRL-22 and am needing a rifle. Figured I would check here first before I bought something new. As the title states, I am looking for something similar to an RPR, B22 Precision, CZ457 ETC.
I would prefer to trade if possible. I've got a Savage 10 FCP-SR listed that we could work something out on. I've also got a Beretta 3032 Inox plus a bunch of ar-15 parts and reloading equipment.

Savage 10 FCP-SR in 308 Win.

MDT LSS XL aluminum chassis W/ Magpul PRS Gen 3 stoc &, Magpul MOE Grip


Also includes factory stock and 2 10 round pmags

Asking 1000. Trades considered but cash is preferred.

OPTIC PICTURED IS NOT THE ONE INCLUDED WITH SALE.

RCBS MatchMaster FL bushing die set 224 Valk. (RCBS #11208) Dies are in like new condition and come with all factory paperwork and box. asking $90 shipped

-Once fired 6.5 Hornady LRP brass. All was 140 and 147 eld-m. Came from 2 different bolt guns and super clean. I have 1400rds in total. $70 per bag of 200rds. $8 shipping US50. *NOW: Only 200rds left.

-Once fired 308 brass. Mostly Norma. Came from a Scar 17. I have 100rds in total for $35. $8 shipping US50.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-Once fired 5.56 brass. Mostly LC. Came from 2 different ARs. I have 15.0lb in total so it should be 1000rds. All for $80 plus $18 shipping US50. Sold.

-Once fired 9mm brass. I have 29.1lb in total so it should be 3300rds. All for $100 total plus $28 shipping US50. Sold.

Zelle or PP F&F. US50 only

ALL HAVE BEEN SOLD

3 2 lots of 500 88 Grain Hornady ELD-M 223 Projectiles. These are factory seconds and are in boxes of 100 EA. I am asking $110 per 500 shipped but will discount shipping/price on larger amounts sold

selling for a local friend who hasn't discovered the Internet yet. Send me a PM.

Original box and Leupold C-Clamp included

$2400 shipped

The bolt catch on my MWS has started flopping around freely, no spring pressure against it. I'm not sure what the problem is, but I need to get this fixed as the bolt gets caught about every other round.

Tonight I found an allen wrench the correct size for the screw in the bolt catch, but I can't turn the screw. I actually twisted the little wrench and broke the tip off. I got the tip out with a magnet but I am still at a loss on how to get this screw loose.

Do any of you have ideas on how to get the screw loose that holds the bolt catch in? Any ideas why the catch would just flop around freely? It's like the spring is broken or stuck in the compressed position.

Thanks

Hello

I have problem with marks on my lapua cases on 308 win, no stiff bolt on action or other signs of overpressure. I have around 800m/s with 175gr lapua scenar L bullets, N140 powder, 28inch barrel length. I have the same problems with factory ammo, more on pictures.

I have a new, mounted but never shot, Vortex Razor Gen2 4.5-27 MOA with EBR 7 reticle. I’m switching over to Mil based scopes and need to move this. I am asking 1200.00 shipped and that will include the set of Nightforce rings it sits in. Ships in the factory box with all parts and manuals.

Venmo, USPS money order, or personal check is accepted. Personal checks will clear before I ship. Venmo or money order payments will ship the following business day.

PM me with any questions.

In my search for a durable charging handle I figured the DS arms steel charging handle would be a good fit. I soon came to the conclusion they werent so easy to obtain.

I began searching for a durable aluminum charging handle that might as well have gas divergence built in to the design.

My toss up at the moment is:

The pri gasbuster m84 (non Ambi) has a great reputation.

Original BCM gunfighter mod 4 made now by Vltor.

I do like how the LWRC CH has its oversized steel rivets and steel latching mechanism.

The raptor has dominated the markets lately but I would like to get members take on their current goto.

Sold

Gotta let this optic go unfortunately. A hunting reg change in my state eliminates my need for it.
These are fairly difficult to get a hold of

This has been handled gently but never outside the house or on a rifle

Trades
Looking for a ZEISS S3 or S5 mil
Atlas cal bipods

Brand new, has never had an action in it.
MCS-EH1
ELITE HUNTER
REM 700 or clone short actions
MCS-M5 SA MINI CHASSIS
MTU barrel channel
1 INCH PAD
ET COPPERHEAD MOLDED
FLUSH CUP NON-ROTATING 1 BTM REAR
FLUSH CUP NON-ROTATING 2 LEFT
4” Atlas PIc rail
$850 shipped

Very lightly used Unity FAST LPVO mount, 34mm, with Acro and Aimpoint Micro mounts, offset mount, and top ring mount. Sold together as a package for $SOLD shipped, OBO. This is over $500 worth of kit brand new, so this is a significant cost savings. No trades. Zelle is preferred.