I recently picked up an AXMC in 338 Lapua. My local range does not allow anything over 300 caliber, so I also purchased the 300 bolt body (part 20013) and a 300 PRC barrel (part 2527073BL). After the conversion to 300 PRC, the pin is either not or barely making contact with the primer. Does this setup need the small firing pin or is this most likely a headspacing issue with the barrel?

Walther PPQ M2 sell for 600.00 shipped
cash, money order or paypal F/F no mention of firearms
located in upper MI.
Your FFL dealer must accept form an individual, or pay an extra fee

Like new, approx. 150 rounds fired since new, Sig 220 Elite two tone 10mm with a SAO (single action only) trigger. Factory box, 5" bbl. .and -1- factory 10mm magazine, fully adjustable rear sight.
Installed a much upgraded Armory Craft trigger, hammer, and take down lever, also a Sig super strut and spring, I have over 325.00 in Armory Craft items. I have all original parts as well.
Payments= Postal money orders, certified bank Checks, PayPal (friends and family) ,personal checks with a 10 day hold before shipping.
Trades considered==Leupold VX-6-HD 3-18x44 or 3-18x50 with firedot reticle.

1,250.00 shipped to your FFL dealer. 01/31/2025 pricing options==I will remove all Armory Craft custom parts, reinstall all original factory parts and sell pistol for 995.00 shipped to FFL dealer, you now have 2 different pricing options.
Located in upper MI.

For sale or trade is the custom curly maple stock from my NRL Hunter rifle. Shot great, just can't help but build another rifle.

Action: Origin / Rem700 Clones
Barrel: Proof Sendero (cut pretty tight, see pic)
Bottom Metal: M5 (shown with MDT BM)
Picatinney bipod rail
Arca balance point rail

Any questions just ask. I can also fit it to a barreled action if you'd like.

Stock - $875
Stock & BM - $1000

Looks interesting. Video is a little...

Login to view embedded media

Been a lurker for quite a while, decided to get a bit more serious so time to join.

I'm not a fan of bench clutter and not the type that wants all the components, small tools, and accessories out displayed on open shelves or otherwise congesting the bench area. I don't mind a few big items out at the ready suck as scale / trickler, AMP, trimmer, and a press or two but I'd like to get boxes with dies, funnels, Dillon toolheads, and even larger items on Inline quick-change plates like my CPS primer seater, barrel vise, swager, and such put away somewhere enclosed. I have a smaller rolling tool box with all but a few drawers dedicated to small tools, parts and such and it works. Powder and primers are in a room in the house with good temp control. On the bench, the dillon pretty much stays in place on one end and an Inline flush QC mount rotates between barrel vise, Zero, CPS and a couple of other things.

How do you store all the little stuff?

Does anyone use a larger rolling toolbox base that has larger drawers or spaces to hold thing like the CPS when not in use? Which one and how does it work for you.
Any pre-made cabinets recommended? Most at Lowes Depot are deeper kitchen type cabinets and I'd rather have something shallower - no more than 10" deep.

Finally going to buy one. Which is the best overall one you guys have found. I don't switch powder to often but load n565 mainly then imr 7977 ramshot lrt and going to try some n570.

I know iguenity trickler is coming out with there own maybe best to wait but have money in hand.

I should add I already the fx120i scale.
Right now I load with rcbs lite then move over to fx120i scale with a dandy trickler to get final charge. Very accurate but very very slow

I've been trying to get AR Comp to work in either 6ARC or 223/556 but it seems like it is way slow in both. I loaded 24.2 grains of comp in 223 with a Nosler 60 bt. If memory serves, QL had it expected to be in the 2900 range from my 16" AR. Actual is much lower at <2500 where 8208 runs 2700. My 8# jug of 8208 is well over 10 years old. The 1# bottle of Comp I just bought recently.

Just bought my first rifle for hunting but I've wanted to do long range shooting forever so its just a matter of time before I'm falling down this rabbit hole, came here to join the support group

Optic Sale - Free shipping & No Tax

PM with scope model your looking for a price on.

Leftover from a recent build

Sharps Bros Heat seeker w/ 14" Handgaurd. for r700 SA. BNIB, never mounted or used. Includes all original hardware and papers (even the stickers) $275 shipped to you

My next build will be a 22 BR Norma/Lapua. I have read most of the 22 BR threads via the search feature!

My intended targets:

Steel out to 1,000 yards.
Coyotes at night out to 400 yards.
Groundhogs out to 600 yards.

Remington 700 S/A Clone
McGowen Precision Barrel
Diligent Defense Enticer LT-i suppressor

What barrel length and twist rate would you recommend?
I already have a 22-250AI 1:7 twist so I do have a decent supply of heavy for caliber .224 bullets.

I may want to shoot mid-weights for our Ohio groundhogs.

Thanks!

The exigent Vanish is supposed to be pretty good, but it’s not the only can that they sell.

Exigent Overwatch 762. Anyone try one yet? Wondering if it’s better than Vent 1, ODB, Anthem.

I’m not using OSS/Hux products, and don’t have any desire to go there.


No, I don’t work for them in any shape or form.

Faxon Gunner 18” Barrel and GB with rifle length gas tube. Less than 100 rds on it.

$100 Shipped. Venmo or PayPal F&F

All prices include shipping. Payment via Zelle, PayPal F&F, Venmo

————————————————————————————————

#1 Geissele factory 10.3” Mk18 upper. Not a ton of rounds. Approx 350 rd count. (No BCG/CH)

$500 with Rugged Flash Hider
$425 with no muzzle device

————————————————————————————————

#2 Sionics factory 14.5” Extreme Reduced Gas Port. P&W Rugged Flash Hider. Less than 50rds fired. (No BCG/CH)

$450

————————————————————————————————

#3 WWSD clone build. YHM FH, 16” Faxon Pencil, Smoke Composites 12” rail, Faxon Receiver. Rd count 100. (No BCG/CH)

Total Weight 2lbs 5oz

$375

————————————————————————————————

The last few parts of my “getting out of 22 ARC” sale:



Priced to sell at sold

Bergara B-14 chambered in 6.5 Creedmoor w/ factory 5rd mag
MDT ESS Chassis with SRS-X Stock
MDT Elite Grip
MDT 20 MOA Scope Base
Area419 6.5 Hellfire Brakej
MDT 10 Round polymer mag (not pictured)
Does not include Wiebad Mini Stock/Cheek Pad

$1350 FTF North Alabama, $1450 Shipped to your FFL

Add Arken SH4 Gen 2 4-16x60 Scope (includes Arken Titanium Rings, Scope Level, Throw Lever) for $250. or a Vortex Diamondback Tactical 5-25x w/ vortex rings for $200 (both MIL)

LabRadar Chronograph w/ Bench Rest Base. Excellent condition, works perfect. $180 Shipped

Same Data

As the title states, I’m looking for a Nightforce NXS 2.5-10x32. Would prefer a mil scope but may be open to MOA. Only looking for the x32 objective size. Not looking for the x24 nor x42.

Sellers will be thoroughly vetted for authenticity. Will not do business with new members.

Just wanted to say hi.
I’ve been shooting gas guns since ‘09 but I picked up my first bolt gun late last year and I’m hooked.
I picked up a Tikka t3x CTR (stainless) in .308 w/ a 20” barrel and immediately ordered a Grayboe Phoenix2 stock to drop it into. I am VERY impressed, despite all of amazing things I had already heard about Tikkas before getting this rifle. It’s not picky at all and I’ve managed sub minute 5 shot groups with most of the 168gr ammo that I’ve put through it, as well as some 175gr ammo.
Just earlier today I took it out a bit past 600 yards and got consistent hits.
I look forward to learning more and spending more time on the long range!!

Grey Birth La Chassis for CZ 457. $400 Shipped

• Grey Birch Bag Rider
• MK Machining Grip w/ Thumb Rest
• Folding stock & built in ARCA Rail

Hi Guys ,

So I remember back in the day , USO made a Spotter with a reticle in it , and they talked about making a version of it with a integral LRF , and I think they made at least one prototype , but as far as I know never made it available .
With all these new WMLRF coming out , has any one thought of mounting one to a Spotter scope , and zeroing it to the reticle ?
Seems it would be a good fit .

Later Chris

MDT Elite Sniper System chassis for a Remington 700 short action. $755 Shipped