I purchased it a while back and was going to use it for my XM3 kit but realized it was the incorrect one. I believe this one is what they considered a ratcheting model. It is 3/8 and I do not remember what it was set for. I know you can send it back and have it adjusted to what inch pound you want.

Looking for $50 shipped to lower 48
Prefer PayPal friends and family

30moa a Sako quad 11mm dovetail to picitinny scope base.

Asking $80 shipped to lower 48
Prefer PayPal friends and family

over the past year i have collected parts and built a full kidd 22, (no stock parts left) bedded in a boyds pro varmint. i went a real roundabout way, replacing parts as i could rather than buying a barreled action. My issue now is feeding; i have tried half a dozen types of ammo, new mags, old mags, all three recoil springs, and i am still having feed issues. is there anything i can do or do i contact Kidd?

It struggles to feed the first round and shaves bullets almost every time. This not only causes feed issues, but super inconsistent groups past 25 yards. I think it is clearly an alignment issue, but not sure how it happened. Seems like the feed angle is too steep.

Have tried Wolf match extra, SK Pistol match, SK Rifle match, cci green tag, aguila gold eagle match, and some bulk box ammo. It doesn't really seem to matter what i use, it all struggles to seat the first round all the way to battery and then chokes eventually. everything seems to eject fine, but the feed is killing me.

As new ready to go.

$115 shipped

PP F&F

As new, one range trip, never synced up, so pre-3.30 software, no dropped shots. $475 shipped.

For sale is my custom Desert Tech SRS-A2 carbon fiber rail. Can accept integral suppressors with a 1.5” OD
$250 each
I have tons of them available.
They are 3.5-4 oz lighter than OEM, (you can feel the deference free shooting the rifle)
Much more sturdy, very little play when weight is put on the barrel pushing down. (increasing off the bipod accuracy in my testing)
Much nicer to hold, especially when it is cold.



View attachment 8252971

I have a brand new pair of Walsh Custom Defense mag holsters. These were custom made to fit MDT's XM mag. They have Tek-Lok clips installed.

I ended up going a different route with the build and will no longer need these.

They are OD Green carbon fiber

$50 for 1
$90 for both.

Prices are shipped.

No trades at this time please. Thank you.

$450 for code, PayPal FnF

pyrofx

XSergeant
Rating: 3.0/5 this site
388 posts this site
>338 Lapua Magnum
10/08/2014
(1 vote)

---

Just tried the reloader 33 powder in the 338 . 99.0 gr
Kreiger 9.3 x27
fed 215mag
hornydaddy 285
2789 es of 6 with hornydaddy brass. bolt lifts fine untill the cam over . then it takes a bit of a nudge.
2796 es of 14with Lapua brass . effortless bolt lift .
both loads shot at 80 degrees, and at 400 yards with 12mph wind from 3.
they both kept 1" vert . last 5 shot group was 2.125" All at 400 yards

Greg
Rate now:
ChrisGarrettHPBT

XFirst Sergeant
Rating: 3.3/5 this site
2214 posts this site
Re: >338 Lapua Magnum
10/09/2014

---

Sako TRG-42 338LM 1:12" twist, so this is for the 250s.

Go-to powders are VV-165, VV-170, H-4831sc and H-1000.

I bought an 8# jug of H-4831sc and have used that a lot.

Pet load is H-4831sc at between 88gr-89gr under 250gr Scenars, LockBase, Berger OTMs and SMKs, for about 2875-2950ish fps depending on Miami temps. It's not a stiff load, but it's not a cream-puff load, either.

For the Berger 250gr pre-production testing, I just split the difference at 88.5gr and played with seating depth, my rifle likes that node that much.

Looking back at my VV-165 loads with the 250s, anything from 84gr-87gr and just about 2800 fps. VV-170 at 93gr in my 27.125" barrel yielded 2825 fps.

For my limited testing with H-1000 and the 250s, 97gr got me 2974 fps, so well on my way to be above hot at 3000 fps.

The rifle is fairly accurate (I'm just a hack) out to the 1000 yds that I've shot at 4-5 times, so most of those combos are close to one another accuracy-wise.

Chris
Rate now:
lashlaroe

X52 MONTHS
Premium Member
First Sergeant
Rating: 3.5/5 this site
3294 posts this site
Re: >338 Lapua Magnum
11/16/2014

---

I must have missed this one or maybe it just got pinned. I'm getting ready to star loading .338 LM for the first time and will be starting with H1000 and hornady 285 bthp, because that's what I have right now.

Based on searches on the old Hide and other googlization, I've got my starting points and maxes set for first try, but am still interested in loads others have had success with.

As you know, loading manuals and other industry sources seem notoriously slow to add load information for newish products. Even Hornady doesn't list good loads for it's own 285s that have been out for years.
Rate now:
Diver160651

XFirst Sergeant
Rating: 3.6/5 this site
2158 posts this site
Re: >338 Lapua Magnum
11/19/2014 Last edited 12/08/2014 by Diver160651
(5 votes)

---

[IMG2=JSON]{"alt":"338 Lapua Magnum 285gr A-Max @2835fps","data-align":"none","data-size":"full","height":"180","width":"240","src":"https:\/\/farm9.staticflickr.com\/8117\/15557339127_6cd3ed56e5_m.jpg"}[/IMG2]
Rate now:
lashlaroe

X52 MONTHS
Premium Member
First Sergeant
Rating: 3.5/5 this site
3294 posts this site
Re: >338 Lapua Magnum
11/20/2014

---

Thanks Diver. Just what the doctor ordered. I'll start low and work my way there.

Excellent group BTW! Impressive shooting and rifle.
Rate now:
dTros

XFirst Sergeant
Rating: 3.3/5 this site
1379 posts this site
Re: >338 Lapua Magnum
11/25/2014

---

Stiller Tac338

22" Shilen Match Select

300gr SMK

92 gr H1000

Lapua Brass

215M Primer

2710 FPS



Regards,

DT

Rate now:
KITTYCATMANX26 MONTHS
Premium Member
Corporal
Rating: 3.4/5 this site
49 posts this site
Re: >338 Lapua Magnum
11/27/2014

---

Plinking: 250gr Scenar or SMK, 86-88gr IMR 7828 (easy on the brass and bore)
Stout load: 300gr Scenar, 92gr Retumbo
Long Range: 267gr MTAC (single feed), 95gr H-1000 (still working up)
Rate now:
DefenseLaw

XSergeant
Rating: 3.2/5 this site
293 posts this site
Re: >338 Lapua Magnum
12/03/2014

---

96 gr RL-33
Lapua Brass
215 GM
300 SMK, .02 off the lands.
32 inch Pac-Nor, 2936 FPS.
Rate now:
vinsonrXGunny Sergeant
Rating: 3.1/5 this site
583 posts this site
Re: >338 Lapua Magnum
12/08/2014 Last edited 12/08/2014 by vinsonr

---

300gr Scenar

92gr H1000

Lapua Brass

215 primer

base to ogive: 2.95

2820 fps

26" 1:10 DTA SRS



A writeup I did while doing load devel for my 338: 338 Load Devel

Rate now:
secondofangle1X27 MONTHS
Premium Member
Gunny Sergeant
Rating: 3.5/5 this site
503 posts this site
Re: >338 Lapua Magnum
12/23/2014 Last edited 09/24/2015 by secondofangle1

---

DTA SRS DT barrel 26"

lapua brass

fed 215m

92.0 retumbo

2745 with SD 6.0

300 grain Nosler cc

< 0.5 MOA 5 shot groups

ETA I'm getting a slight ejector mark, very faint, so I backed down to 91 grains. My barrel since it was broke in is faster, so 91 grains still gets me 2752 average velocity 5 shots, SD <10 FPS. Next I'm going down to 90 grains, just to be kind to the brass, just in case. To reiterate, this does not appear to be a HOT load, I'm backing down for brass life and an extra safety margin.

Rate now:
epracmetconXSergeant
Rating: 3.1/5 this site
199 posts this site
Re: >338 Lapua Magnum
12/31/2014

---

AI AX338 27 inch barrel
Winchestor WLRM primers
94.0 GR of Retumbo
300 gr Berger OTM Hybrids
According to my DOPE, running around 2960fps
Rate now:
captacademyXGunny Sergeant
Rating: 3.0/5 this site
831 posts this site
Re: >338 Lapua Magnum
01/12/2015

---

Rate now:
reeldoc1XSergeant
Rating: 3.0/5 this site
437 posts this site
Re: >338 Lapua Magnum
01/16/2015

---

Distance off lands?

Rate now:
reeldoc1XSergeant
Rating: 3.0/5 this site
437 posts this site
Re: >338 Lapua Magnum
01/23/2015

---

up for overall length info please

Rate now:
epracmetconXSergeant
Rating: 3.1/5 this site
199 posts this site
Re: >338 Lapua Magnum
02/10/2015 Last edited 02/10/2015 by epracmetcon

---

I'll have to measure when I get home. I am loading them to mag length, they are quite a ways off the lands. I would not recommend this load for everyone, it is just a touch over pressured.

EDIT: They are 3.784 COAL.
Rate now:
rltw75

XSergeant
Rating: 3.2/5 this site
206 posts this site
Re: >338 Lapua Magnum
02/21/2015

---

Looking for some input and your opinion on the Berger 338 OTM's.

I have H1000 and some 250's to load up. Been using scenars but wanted to give the Berger's a shot.

26". 1:9.4 Krieger. 1500 yards is max range available. My rifle likes bullet jump (.015).

Thanks

Rate now:
cecchino76XFirst Sergeant
Rating: 3.0/5 this site
1682 posts this site
Re: >338 Lapua Magnum
03/11/2015

---

What is your COAL or to the ogive length ?

Rate now:
WolfCobraXSergeant
Rating: 3.0/5 this site
152 posts this site
Re: >338 Lapua Magnum
03/14/2015

---

I am currently making a MV of 2632 out of my 27" AI AXMC using Berger 300 OTMs and 87.4 grains of H1000. What kind of velocity jump should I expect if I bump it up to 89.5 grains of H1000? I'd like to get a little more out of my transonic range for shooting at a mile by shooting closer to 2700-2800, but started getting harder bolt lift at 90 grains with Hornady brass. Is it likely I could even push it a little further using Lapua brass?

Rate now:
rltw75

XSergeant
Rating: 3.2/5 this site
206 posts this site
Re: >338 Lapua Magnum
03/15/2015

---

Rate now:
secondofangle1X27 MONTHS
Premium Member
Gunny Sergeant
Rating: 3.5/5 this site
503 posts this site
Re: >338 Lapua Magnum
03/15/2015 Last edited 04/08/2015 by secondofangle1

---

B-ogive 2.971 which is about eleven thou off lands.

ETA I'm getting a slight ejector mark, very faint, so I backed down to 91 grains. My barrel since it was broke in is faster, so 91 grains still gets me 2752 average velocity 5 shots, SD <10 FPS. Next I'm going down to 90 grains, just to be kind to the brass, just in case. To reiterate, this does not appear to be a HOT load, I'm backing down for brass life and an extra safety margin.

New take offs from a p365xl I picked up. Pulled out of the box and removed to delete safety. Included xl grip, safety lever, plunger, and spring. $110 shipped

Spikes Tactical Upper. Has the 7 twist CHF Chrome lined barrel. Shoots good with 77smk handloads.

The hand guard is not a spikes Tactical handguard. Im not sure what brand it is.

Comes with Vortex Strike Eagle 1-8x24 and the mount. Also comes with Athlon TPS Prism Scope.
Comes with BCM grip.

675.00 shipped

PayPal FF Preferred

Vortex razor LHT 4.5-22-50 MRAD
SPUHR SCP3001 MOUNT Tenebaex caps throw lever/ vortex level sun shade all included xlr-2 reticle
$1250 shipped in original box

Would trade for a
matrix 700sa chassis
Cronus gen 2 MRAD
BARREL BLANKS

As the title states, im looking for a surefire fa762ss.....like everyone else. Im looking to buy, i also have some trade items depending on what your looking for.

I have 3 x Vector X 12x DMR reticle for sale.
$2699.00 Shipped CONUS
NO TRADES.....

First the Metcalf stabbing, then the 64 yr. old vet stomped on the bus and this just in:

Login to view embedded media

I have 3 left and ready to ship contact me at 310-275-8797

3 Large OD Drag Bags ready to be shipped to your door $450 but not to PR , HI, or AK

Parts are hard as Fk to get right now SORRY. I will have Coyote Brown and more OD ready in about 2 weeks...

Mike R.

Could this work well? Seems sturdy.

Brand New In Package Geissele G2S-E Trigger. $150 Now $120 Shipped in CONUS. Part # 05-276 Bought for a build and didn't use it.

• Two Stage for AR15 AR10
• It uses a standard .154” trigger and hammer pin so it will fit in any Mil-Spec stripped lower receiver.
• Smooth two stage 3.5 lb. trigger pull
• The G2S-E was designed to be a high quality, cost effective alternative to the SSA-E.
• The G2S-E is manufactured from the same tool steel as the SSA-E

Until recently, my goto stripped upper receiver was the BCM blems. A while back, I ordered half a dozen of them. They all worked fine for various rigs and provided a good thermal fit. When I ran out, I ordered 3 more.

Of those 3, two were unusable. One was so tight that I couldn't even get the lapping jig in, much less the barrel, even with liberal use of a torch. Once I got things together, it shot like crap. Gotta imagine there was a whole lot of stress.

On the other, the charging handle, no matter which I used, kept reciprocating.

So, what else is being used to get a good thermal fit?

Arken Scope Delivery Arrived

We received our first Arken riflescope delivery in a while today. We shipped out a ton of pre-orders and back orders and have some, not all but some, riflescopes in the warehouse for you. Surprisingly we have some 7-35x56's and some SH4J MOA VPR's

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

This is a brand new Razor spotter I picked up from Vortex but recently came across a Swaro spotter that will be used more.

Asking $1270 shipped

Lapua 6.5 Creed Large rifle primer 1x fired brass from factory loaded ammo. 200 pieces $165 shipped

I have a Delta 66 300 Win Mag built on a Surgeon 1086 with a Magazine. It is 22 inch barrel threaded 9/16 by 24 Class IIIA for one of my cans. It has a S&B 3X27 PMII with a Badger EFR with all rails included and the test target I believe is .058.

Please PM me of call 310-275-8797 if you are serious...

Thank you

Mike R.

Sorry for the dumb question but going to order the Area 419 Zero Press. I've never reloaded before so pretty clueless . Should I order the hybrid turret (half 7/8" and half 1 1/4" holes) or standard (all 7/8")? Thanks

About two years ago I began to get a lot of junk mail. I mean A LOT. I get several hundred junk mails a day in my iCloud box and probably 25+ in a Comcast account. I never received so much junk mail prior. I've had the Comcast account for over 20 years and the iCloud account since Apple began their email service when it was @me.com.

Is there anyway to get it to stop?

Most of it gets sent to the junk mail folders but I'm a little OCD and need to empty my emails of all emails I've either read or don't need any longer or are just junk mail. My wife on the other hand usually has 1,000 plus unread emails in her iPhone icon. It drives me nuts.