Post is exactly as it sounds, does anyone have the base to ogive length for the new Hornady 138 A-Tips? Trying to figure out if I want a .150 freebore or a .180.

I emailed Hornady support and they were not willing to provide that information, although they did let me know the overall length (1.475") and boat tail length (0.195").

Selling a midwest industries 14” combat rail m-lock handguard $80 sold
Comes with barrel nut and hardware, but no wrench.



All prices are shipped and payments via paypal f&f

Eveything is sold

Throwing this up here before I put it on the eBay or the GB. Icarus A.C.E 365 XL Hybrid Pro aluminum grip module for Sig p365. Has a full picatinny rail the length of an XL slide or a regular slide with a PMM comp barrel, and 12 rd mag length. This has been fired with but never carried. It does not come with the slide pictured or a mag release button. This will fit in holsters made for the p365 macro, as it does not have the thumb wings as a higher level model. $220 shipped, no trades at this time.

This is the standard length and it has been used and it shows, but still works just like it should. Asking $225 shipped, pp ff, venmo, zelle.

We have a Discount Code for Ryan Cheney Airfoil Rear Bag for the ELR Shooters out there.

TheHide10

Ryan Cheney Airfoil Site



TheHide10

“Built to the same high standards as Bear Creek Arsenal’s renowned rifles and uppers..."

There was a thread on Scout so I wanted to carry this over. Anymore feed back on this rifle. I've heard very little and frankly the Q isn't selling me on it. It does intrigue me though and seems very innovative.

Anyone have any experience finding reliable options for feeding .308 in an AXSR rem 700 LA chassis?

Milehigh suggests Accuracy International's 28490 magazine for the AT, but mentions there might be feeding issues due to the lack of a front lip.

Thought I'd check here before ordering a new set. Looking for a Cobalt Kinetics receiver set (upper, lower and 15.5" handguard) for another build. Will also consider a full rifle for the right price.

Scammers: i'll be asking for photos with username and date in the picture. Mess with someone else.

Decided to change colors. Used a few times. High temp . $70 shipped. Paypal or venmo.

12.5" 5.56 barrel no gas block $175 shipped ppff venmo

very good condition. $175 shipped. Paypal or venmo

22” 6.5cm Custom rifle built by Altus Shooting Solutions. Defiance Ruckus Action(black nitride) Proof Carbon Fiber 22” Prefit barrel, Triggertech Diamond trigger, Masterpiece Arms ESR Tungsten Chassis, Area 419 Hellfire Match brake and i added an extended night vision bridge(i have smaller original one as well). Everything is new and unfired. Rifle only without bipod $3500 shipped to your FFL


PayPal FF, Venmo. Zelle or Apple Pay

**Unfired** PRI Mk12 MOD H
16” 5.56 1-7 twist, Douglas 416 stainless barrel with BCG & gas buster charging handle and flip up irons.This is upper was factory built by PRI.

PRI lower with Larue mbt 2 trigger, DoubleStar ace m4 socom stock.

I purchased the stock used and sent it out for cerakote. Everything else is brand new.

*Bipod and suppressor not included in sale*

Complete upper - $1500 shipped
Complete rifle $2000 shipped to ffl

Bought a Tikka recently for the action, selling all the oem parts off of it. All new unfired.

$100 $80 — 270WSM 24” Lite SS barrel
$sold — Factory trigger
$80 $60 — Factory CTR pic rail, this is the lowest rail you can get for a Tikka

Make offer on the following as a package:
Factory stock
Factory polymer bottom “metal”
Factory WSM mag

If someone wants the barrel and trigger the stock, mag, and bm can be included free.

I am looking for another KRG Whiskey3 for Rem700 or clones. Color does not matter. Prefer fixed stock over a folder but price matters most!

2x Area 419 mag +4 extensions: $ 70 for both SOLD
1x Atlas Cal bipod w/ Area 419 arca QD: BOTH SOLD
1x new 34mm 1.27'' scope mount with bubble level and diving board: $450
1x used 34mm 1.27'' scope mount with bubble level and diving board: SOLD
1x used MPA DN5 6.5 SOLD
1x new MPA DN5 6.5 SOLD
1x used Area 419 adjustable arca rail: SOLD
1x L3I dina rail missing two of the screws w/ 5x L3i brass weights: $80
1x set of troy battle sights SOLD
1x surefire m300 with arisaka mlok adapter: $200
1x set of midwest 45* offset sights: $80
1x Magpul CTR stock with Larue riser, stock was sprayed with alumahyde in FDE, come with enhanced rubber pad: SOLD
1x Magpul CTR with enhanced rubber pad: SOLD
1x set of 30mm "no name" rings: $45
1x set of 30mm Vortex pmr rings: SOLD
3x 3d printed knockoff "clutch'': $SOLD

All prices FIRM and include shipping to CONUS. Send me a PM for Payment info. Paypal FF or Venmo only.

Basically got a brand new trigger tech diamond with a curved shoe right hand safety. It’s a catch and release from here, but looks to be brand new. There’s hardly any wear at all on the sear. So maybe used a handful of times.

$215 shipped sold

I am interested in a subsonic load for home defense. I have researched the subject and there are a number of opinions. From what I understand, the lighter weight bullets will not cycle and they are single shot only, whereas the heavier bullets have a better chance at normal operation. I have some 77gr SMK and some 85gr Barn Burner bullets. I have a plan to work up, or work down, a load but I think it would involve too many rounds and a lot of time. So, without having to re-invent the wheel, does anyone have a load they have used that cycles the gun properly and remains subsonic? I have a .223 suppressor, and the gun is a 10.5 inch AR pistol. Before I get hate mail and too many other options for gun type and caliber, this is my plan and I would like to see it through. If my testing does not produce a viable round then I will look for alternatives. Thanks for you help.

Lightly used Timney 2-stage with flat shoe (2.5 lb pull)

SOLD

Like new condition, $SOLD TYD via Venmo/PayPal. Ships USPS or UPS with tracking.

I have 2 bricks same lot. $450 shipped.

Thinking about getting your pet "chipped?" This is what it did to our dog when we got her chipped two weeks ago. This is what it looked like one day after we discovered it and began treating the abscess. Of course, we discovered it festering under her long hair on a Sunday, so that required a trip to the emergency vet clinic. I'm all for the idea of chipping, but in practice, it seems to have some flaws. Common sense dictates that when you inject something into your body that doesn't belong there, you body may reject it unless it was done under ideal conditions. Of course, vets don't tell you this while they push this wonderful new innovation in pet ownership. As a matter of fact, the vets who saw this told us they have never seen anything like this before. (Keep in mind, these are the people who make money selling this procedure.)

Though I'm not a vet, I would suggest that before you decide to expose your pet to this, you start asking questions of your vet and see if they are honest with you about it. Also, shave the small area around where the chip will be inserted so you can monitor the area for problems.

We were finally told that this could even happen months to years after the chip was inserted, and if the chip had to be removed, it was a nasty procedure. Hmmm.. I wonder how they new this?

Pre-spring cleaning sale. I apologize for the scrambled order of pictures...it uploaded them all funky and I'm doing this on my phone.

First up is a Springfield TRP 1911 in .45, it has seen around 600rds down the tube. Will come in the factory case with 1 factory Springfield magazine, the original holster and mag carrier, a JM Custom kydex AWIB holster (already cut for rmr clearance if it was ever added to the gun), and a JM kydex AWIB mag carrier. $900 $800 Shipped to your FFL (more pictures on request)

Next is a Unity ATOM Gen 4 Glock 17 slide w/RMR 06 (type 1). Slide and optic have around 2000rds on them so they are fairly babied. These slides are awesome. This slide has all internals, so you just need to drop in your barrel of choice and slap it on your frame. $750 $700 (more pictures on request)

Next is a Unity ATOM Gen 4 Glock 19 slide. Around 3500rds on the slide. It will come with the RMR plate but no optic. Slide is stripped. $375 (more pictures on request)


Prices do not include PP fees or shipping unless specified. Like it said above, message me and I'll send you more pictures of any item.