I have 456 projectiles for sale.

356 of same lot number - 3 boxes are sealed.
100 in older packaging.

$165 shipped

paypal f/f - zelle - apple pay

I was doing some tinkering around with my Rem 700 in 7-300 win mag earlier today with bullet measurements. The smith who built the rifle didn't really throat it properly unfortunately. On the flip side of that, its also probably the best shooting rifle I've ever owned. When I had it built 10 years ago, my plan was to shoot the 162 amax from the 28" Bartlein 9 twist. There were no really good high bc bullets other than the 168/180 bergers back then. Anyway, the 162 amax hit the lands at around 3.450" which is very short, and the bullet is seated way down in the case. I shot them for 7 years or so before finally switching to the 180g ELDMs. These hit the lands around 3.5" But again, these are seated very very deep in the case. The dreaded "donut" got me thinking well just how far out do these 180s need to be seated to not be in that area? I haven't experienced donut issue yet from the Nosler brass that's been fired about 10x, but just got me curiois anyway. From my crude measurements I'm coming up with around 3.750" which is a tad bit longer than you can fit, feed, and function through the factory mag. I'm well aware of Wyatts extended box mags as I had to have one for my 338 EDGE/300g SMK build years ago. I think that allowed me to get to 3.8" or so. I'm just wondering if that is the most cost effective way to get a longer COAL? I have a McMillan A5 stock, but it's just inletted for the standard BDL bottom metal. Would it be worth it to convert to M5 AICS mag setup? Can a guy install the Wyatts mag box himself? The M5 detach mag set ups are pretty spendy from my limited research. Could I have a smith go in and just ream out the throat to the new desired length? And if so, could that potentially be a risk on ruining how it shoots?Here is a couple pictures to represent what I'm talking about with the bullet lengths.

We have in-stock a left handed Terminus Kratos Lite Magnum action. It can be shipped as the action or you can call in and have us build you a barreled action for a high quality precision rifle that comes with our satisfaction guarantee. Check it out here Terminus Kratos Lite, or call us at 435-462-1607 if you need any help with getting the order in or any questions.

expires 1/1/26
cheapest barrel on their site is $979
$750 obo

ALPHA munitions small primer brass

200 twice fired, sent out for annealing and wet cleaning ready to size and load In ALPHA hard cases. $175 shipped

182 twice fired and has not been processed, annealed or wet cleaned yet, in ALPHA hard cases. $125 shipped.

LAPUA brass, all from factory BERGER ammo, once fired from my AX. In boxes, not processed.

200 Large primer pocket, $150 shipped

Buy it all for $375 shipped. Have 140 hybrids available too in another add I will make a deal on if you want them with the brass.

50 count of the 30cal Cayuga bullets weighing 209.2-209.3gr on my reloading scale. $40 shipped

Rem 700 SA RH
Sniper Gray
All internal weights
Buttstock weight
Elite Grip & Cheek Piece
4 External Mlok weights
Bag Rider

Minimal wear and tear. See photo for couple of dings on rail

SOLD

You are looking at a low 3000s serial number Springfield Armory Professional 1911 w/ light rail. These were originally designed and made for the FBI’s elite HRT by the Springfield Armory Custom Shop. These are probably the best custom level, duty-grade 1911s ever made, and sadly are discontinued because SA shut their custom shop down. More info and full specs can be found here: https://www.springfield-armory.com/.../1911-professional-light-rail-45-acp-handgun/

This 1911 has about 700 rounds through it, and was fine tuned by the late-great John Jardine (priceless). It’s a shooter w/ one cosmetic flaw, 1.5 inch light scratch on the top of the slide. Comes with the VZ Grips (shown), the original wood grips, case, accessories, the receipt from John Jardine and six 7rd mags (unused).

**SOLD**

Looking to sell a couple mounts. Prices are before shipping.

1) Badger 34mm 1.5” Unimount 0moa
No issues. Sold scopes and rifles. !!SOLD!!

2) LaRue SPR 1.5” 34mm mount. No issues $199.99

This is an extra one I had that is unused... made by Seekins Precision

Vortex (Seekins) Cantilever Mount 34MM 20 MOA

Paypal F&F - $159

I have an upper I got a while ago from another member but have no use for it.

- Larue receiver
- Larue 14.5” pencil barrel pinned with a aurefire war comp
- tool craft NB BCG (I think it was unfired when I put it in there)
- Geissele MK4 handguard
- I’ll have to double check brand of the ambi charging handle

$515 shipped

All items are used but in good or better condition, unless otherwise stated. Reasonable offers considered for bundled purchases. I will keep this list updated. Please PM me if you want something. Responding here invites scammers. Here's what's up for grabs...

MDT Ground Pod, ARMS17, New - $125 (2 available)
MDT AICS Metal, 12 Round Magazines, See Pics for Colors - $55/each (5 available)
MDT Spare Round Holder, Black, New
MDT Exterior Forend Weights, Green Cerakote, New
MDT Baker Wings, Dark Grey Cerakote
MDT Rubber Dampers for ACC Elite/SRS-X Elite, (1 FDE) New
MDT AICS Metal, 10 Round Magazine, Moss Cerakote

I have (2) TriggerTech ACE Trigger System for Glock (Flat Trigger) for sale. Both are new-in-box.

Price: $275, no trades please.
Shipping: Included via USPS with tracking. Additional fee for shipping OCONUS.
Payment: PayPal FF or Venmo. Please use "thank you" for the transaction comments.
To Purchase: DO NOT RESPOND HERE. PM me and I will respond to your original message with instructions. Any other contact claiming to be me is a scammer.

I have the following for sale. PM me to purchase. Responding here invites scammers.


MDT Send-It Level, Integrated Pic Mount (Rev 2), New - $225 (1 available)

MDT Send-It Level (Rev 1) with Brandt Built Cant Indicator - $175

MDT Send-It Level (Rev 1), New

MDT LRA MV3 90 Pic Mount

MDT LRA MV3 90 M-LOK Mount

Selling:

Coup de Grace action with MPA 6.5 creedmoor barrel and Triggertech Field Rem 700- $Sold

Selling a PVA 6mm creedmoor barrel. This was from the rock creek barrel nut prefit run of barrels. It measures 20” and is their #5 profile. Threaded 5/8-24 and twist is 1-7.5. Selling with barrel nut and has around 140 rounds down the tube. No group photos but has shot eldm and eldx really well. Only factory rounds have been ran in this barrel. Asking $350 shipped

Moving to a 6 dasher.

Open for trades:
Berger 105, 109
Sierra 107
Any other random sh*t

I have for sale .30 cal and 6.5 cal Hornady A-Tips. Bought after the new year and going a different direction.

(200) .30 cal 250 grain A-Tips - $190 Shipped​

(200) 6.5 cal 135 grain A-Tips - $180 Shipped

I would like to sell all of each caliber and grain weight per buyer. I will not sell single boxes per buyer. These are competitively priced as is. Just want to move them to make room. Prices are shipped.

Berger 22cal 60gr FB Varmits
1150ct @$30.00 per 100ct

Berger 6mm 115gr VLD’s
850ct @$38.00 per 100ct

Nosler 6mm 70gr Ballistic Tip
900ct total
100ct boxes-$38.00
250ct boxes-$80.00

Barnes 6mm Varminator FB
500ct @$22.00 per 100ct

793x LC 223 rem 2x fired brass (some are partially processed and some are fully processed/ready to load, have shot some factory ammo that is LC 223 have added 40-60 to this) $220
315x LC 308 LRP 2xfired (annealled only)$Will need to recount
81x NEW and x48 1x fired Lapua 6.5 creed SRP $SOLD
687x FGMM (687x annealed and 2x fired)$300
202x Alpha 6 dasher 10x fired and annealed $Keeping
585x starline 223 rem (85x new primed,15x 1x fired, 150 2x fired primed, 335 fully processed 2x fired)$Keeping
140x Lapua 308 win SRP 2x fired -$Keeping
475x Lapua 308 win LRP 300 are 1x fired and 175 are 2x fired$375

1x 6mm Nitride still have allen wrench $160
1x 6.5 Nitride still have allen wrench $SOLD
or $300 for both.

Who ever takes both can have the 3/8 Allen wrench

Login to view embedded media Login to view embedded media Login to view embedded media

Used SSA-E. Had it in an AR-10 for a couple hundred rounds. $180 shipped

Custom made ammo boxes .
I have some curly maple
An be laser etched with your name/ caliber or logo if you have a suitable file. $125 shipped to lower 48.
These hold 50 rounds. Neeed your cartridge type and overall length.
Allow 3 weeks for delivery
Check or money order

New in box

Horus HoVR™ 6.5-40x50mm Spotting Scope​

Tremor 4 reticle

$999