New in box sig cross carbon six 6.5 barrel.
20”
1-8 twist
800.00 shipped

Selling my Sigg X5 Legion with Leopold Delta point pro, Leopold cowitness rear site, four magazines, and a comp tac holster and a magazine holder.

Will not sell magazines separately unless pail sells first.

Located in San Antonio,

$1400 $1100 for everything.
I’m having a very hard time uploading pictures so feel free to message me and I’ll text you whatever you want.

Hit the range today to dial in a couple things for an upcoming pig trip.

Brought "the one" just to verify zero of my 20" Grendel, a Noveske build, all their parts, barrel, etc other than a Smoke Composite stock and grip. Topped with a Leupold VX-6 HD 3-18X, 50mm, and a Thunderbeast Ultra 7.

I usually shoot Hornady 123 SST, which routinely shoots sub MOA out of that gun. Today I grabbed some Underwood 110 gr as its just sitting on a shelf. They stopped making it in Grendel so I went into a conservation mindset, but realized - might as well burn through it over the next couple seasons.

1) POA/POI vs the SST - nearly identical at 100 yards.

2) I realized I'd grabbed a 4 rd mag - I usually shoot 5 - but at $3/rd, I'm doing a $12 experiment, let's see how much adjustment we need... results were enough to make me take a break and reflect on how much I wanted to do that again.

To be fair, my next group was at least... .5 - .6 MOA as I was chasing this dragon, but I think it is safe to say this was a personal best. I know it isn't a 10 round phenom, but I'll take it... with a little luck this is an unbeatable combo in the small frame.

Naturally, Noveske stopped making the Grendel barrels and Underwood no longer makes the ammo - but, as the saying goes - I got mine

Arteryx Knee Pads.

$60 TYD in the lower 48.

This was used on a call out duty belt. It's used, moved around a lot but in excellent over all condition.

Safariland 6378USN-2832 (Glock 19/23 w/ Light - Ranger Green) G-Code RTI Black Anodized Mount. Was used with a Surefire X300 Light.

It has Ghostmens Design's Portal Installed. Original hardware also included.

$100.00 TYD USPS Priority. Paypal F&F with no note.

Have any of you fine folk done business with Not Just Guns located in Mason Mi.
Thanks for any and all help
Frenchie

I have 1 slightly used nightforce spotting scope with soft case and original box works perfect 2200 shipped

I have a sphur 4601 20moa 34mm with leveling tool 200.00 shipped
2-6.5 ace breaks 80.00 each shipped

Using LC Match brass in a .308 and 42.5gr Varget fills the brass past the shoulder to the base of the neck so much so that the bullet (175 SMK) will not go in unless I compress the powder to obtain the correct OAL.

I wanted to start at 42 and go up to 44 but the way it's looking now, there's no way to fit 44 gr in the cases.

THIS SEEMS REALLY WRONG! What's going on here? I don't want to compress powder by jamming the bullet into the case right?

Is Subic Bay really going to reopen?


Looks like “yes” but mostly Philippine Navy with US forward presence.

Sirhr

So I am trying to set up my super trickler and I connected the power supply cable from the super trickler to the rear of it. The scale cable is connected from the super trickles to the and fx120i scale and it is powered up together. The scale is not syncing with the super trickler.
If I go into scales calibration the hour glass just spins and I can not begin calibration.
I can however calibrate the scale using its own way of calibrating itself. Both units are new out of the box first hook up.
The super trickler manual says something about taking metal panel off back of scale and plugging in super trickler cable but I have not cable for that to connect to. Was that a gen 1 thing?
Any help
Is appreciated.

Hawkins Hunter DBM bottom metal with .308/6.5CM flush mag. Like new- $250 Shipped

MAGPUL Pro 700 Lite Chassis in FDE for a Rem 700 SA for sale.

Model #MAG1199 brand new sealed in box.

$525 475 + Shipping

Bartlein Heavy Palma 1:8" Twist finished at 26". Chambered by DMR LLC in Las Vegas. 10rds

Had the idea to build a PRS rig but never tried PRS. Sold the chassis so now the barrel. It was on a Defiance Deviant Tactical action. Only shot 10rds. Cerakoted black by DMR. $300/shipped. Feel free to contact me with any questions. Thx

Pretty much what the title says. Area419 doesn't have a Red-Dot Plate for their Tactical Mounts that supports the MICRO footprint and I'm looking for a 3rd party solution.

Unused 308 Lapua brass, 98 pieces $85 ship.
been stored for a while. might have a small dent on the neck.

Super, young man. Great talent, even better character. Single elimination 104 teams - they took it all last week. What a hoot to watch!

26” Benchmark for Impact 737
Cut Rifling
.120 freebore
Threaded 5/8x24 in muzzle
VCC Contour
APA Fat Bastard Brake. I should still have the box and port screws for this as well.

This barrel has less than 250 rounds on it and printed in the .3’s consistently with 109 hybrids.

$550.00 shipped for both

Looking to either purchase or trade for a Vudoo or Rimx barreled action.

Looking to sell my late-manufacture AT in .308 Win. Rifle has the folding stock, pale brown skins and thumbhole kit, comes with a Pelican case from Mile High and a 22in 6GT M24 contour barrel in Sniper Green. Also has the high action rail, Anarchy Outdoors picatinny spigot extension, and a 10rnd mag. .308 factory LW barrel has been machined for and includes a Griffin PSR brake.
308 barrel has ~400 rounds on it, GT has 200.

$4500, buyer pays shipping and insurance.

Pics to follow shortly.

Hoping to sell my NF ATACR 7-35 MIL XT FDE. Scope has had zero issues, just trying to standardize my glass.

Scope is in near perfect condition. Glass is flawless. Operates and tracks perfect.

First owner, bought through EU last year. Only have used for a couple of range days. Never ran hard, never competed with. Spent majority of its life in a pelican case.

Can send more pictures if needed.

Will ship in original packaging with factory sunshade and tenebrex lens caps.

Price is with larue LT840H 34mm 0moa mount with diving board. Can sell without mount if preferred.

Scope: 2900
Scope, mount with diving board: 3200

Would trade for zco 4-20/5-27 plus cash on my end.

Wts nx8 2.5-20 mil C. Both optic and mount are in great condition with only a handful of trips to the range. Prefer to sell as a package. Pricing includes shipping to lower 48. PP FF, Venmo, Zelle.

Scope- $1550
Mount- $125

Package deal- $1600 shipped

This is a Savage Ultralite with a Proof Research barrel chambered in 7mm PRC. It's two years old, but has northwards of 800 rounds through it. I thought it was 600, but went through my notes and brass and stopped counting after 800. Because it's fun and I have my own range. I got some new Peterson brass, and dropped down a couple grains of H4831sc to fireform them. I got a stuck bolt at 1.5gr below my accuracy round which I had previously fired through 2x fired Peterson brass. I didn't think much of it, as velocity was lower and the primary extraction sucks on the new 110 actions and has given me fits with even light loads.

In preparing to run a new lot of powder with a new lot of Peterson brass and copper solids, I cleaned the snot out of the barrel. When I scoped it, I saw this longitudinal crack which is about 1.25 to 1.5" long on the surface, and appears to have signs of continued travel.

I did not see it a few days ago when I has cleaned and scoped it. I think the barrel is toast. There's not much meat on a CF barrel. The bummer is that I have 35 days to prepare for a CO elk hunt, had sold all of my large caliber mags, and have no other guns that are ready for an elk hunt. Even my 1903A3 needs a new barrel, but that took me 45 years to shoot out. I hope Josh at PVA can whip me an Osprey barrel up fast. @bohem

For sale:

Cosaint single stack 9mm 1911. 3.5” bull barrel with full size polymer grip. Matte gray finish slide and frame. CH optic cut (from the factory) with factory rear sight plate and SRO plate. 4 Wilson combat 10 round mags, streamlight TLR7sub-x and 2 holsters included.

For those who aren’t aware, Cosaint has a unique safety that engages by pushing the hammer forward. This allows the hammer to be carried in the forward position. It is returned to the cocked position by depressing the safety. I tried to show this in the photos.

$1250 shipped from my FFL to yours.