Title pretty much says it all. High speed turrets with zero stop. Scope is in good condition with minor scuffs. Glass is clean. No box but comes with the sunshade and butler caps.

Comes with vortex precision rings and bubble level. It served its life with me on a 22.

No trades. Will get pictures up soon.

$1200 shipped. $1125 if you don't want the rings.

Retired 12 years ago from the Army and missed certain aspects so I turned to marksmanship. Certainly glad to have found this site. Just shot my first match (3x500) in New Braunfels yesterday to gauge how much I’d like competitive shooting and I’m hooked. I didn’t do too bad and quite frankly way better than I expected. I really liked hanging out with other shooters and learned a lot. Plenty more to learn which is why I’m here.

Is a bullet still stable/accurate after it goes subsonic?

I know that my precision AR is a tack driver out to 800 yards, but falls off the face of a cliff at 900. Thinking that is because at 800 yards bullet is going transonic. So thinking about various cartridges, what is the max range? I ran through the following calcs:
Seems like many are shooting those cartridges past the above distances I have. Also, what would the advantage (other than energy) be for a 338 over a 300WM at a mile and wouldn't you be able to take a 300WM as far as a 338 accurately?

I want to take my 6.5 CM and try shooting at a mile (the bullet will be at 1050 fps or m=.94) - will this be possible? My 300WM is only a 2 minute rifle so no point in trying to take it that far & I do not have a 338.

Accu-Tac BR-4 G2 is about a year old and is in excellent condition.

I have an ARCA or PIC head; let me know which you prefer.

$250 shipped

I couldn’t find the Original Post for this one , it was discussed when it happened in 2023 - the bit h judge that shot and killed her ex husband, and then shot her boyfriend in the head while he was sleeping .
Still no charges on shooting her ex, that she invited over and then killed but convicted of attempted murder on the boy friend .

Lucky mother fucker to be shot in the head at point blank while sleeping and live , and getting away from that evil bitch .

I have 2 used Comp barrels I am not going to be shooting. I shoot more Rimfire than I do Centerfire. Barrels have been in the drawer for almost a year.

1st barrel is a TL3 6mm ARC cut and spun by Desert Precision. I believe it is a Douglass Blank. Barrel is 26” long and Comp Contour. Threaded 5/8-24. EC Tuner Brake, PPC Bolt Head and HLR Recoil lug for Origin Action. Barrel has 500-600 rounds on it.
* Barrel $450 Shipped, Add Bolt Head $100, ADD Recoil Lug $25. SOLD
*** Recoil Lug and bolt head are not available to purchase individually.

2nd Barrel is a Origin 6mm Creed cut and spun by Altus. It is 26” Comp Contour. Threaded 5/8-24. Barrel has less than 400 rounds on it.
* Barrel $400 shipped

3rd Barrel is a NEW Proof Carbon 6mm ARC for TL3. Barrel is 20” long and NEVER BEEN SHOT. Threaded 5/8-24.
*Barrel is $850 shipped. Sold to @Five7guy as well as the recoil lug.


** All shipping will be UPS. All payments can be PayPal, Venmo or Apple Pay. Venmo or PayPal gift only or cover the 4% fees.

I’m willing to get you all the extra pictures you want if needed.

Ruger Precision Bolt Action Rifle 22LR, 18" Threaded BBL Quick Fit Adjustable Stock, 15+1 Rnd RUG-8400 $499.99
Please call 916-670-1103 to order





Complete specs here: https://ruger.com/products/precisionRimfire/specSheets/8400.html

Nightforce Optics NX8 4-32x50 MOAR $2,150.00

Looking for a good condition foundation exodus long action.

Thanks.

Have a used bog deathgrip infinite tripod for sale. All works well, just upgraded and no longer need this one. 180.00180 shipped.

Anybody have any idea what it is?

Almost looks like the mount and RDS housing were one piece.

Hello-
Looking to see what AICS mags someone has had luck with for a 30 Nosler? Hoping there is a 5 round opttion? Thank you!

Just as title says I have a custom 6creed with a mullerwrks barrel it’s a 20inch 10twist .130 freebore threaded 5/8x24 for lighter bullets. I built it to coyote hunt with and I shot 87vmaxs through it. There is 127 rounds on the barrel so just got broke in and it will absolutely shoot them threw one hole the action is a defiance tenacity black nitride with integrated recoil lug one of the good ones it has a Jewell trigger in the pic I had a trigger tech diamond in it an changed it and it is setting in a bergara b14 hmr stock with a good bottom metal for mag feed. This gun is a shooter and will make someone a great varmint rifle no matter what the varmint is you can pm me here for more info thanks in advance. There is not a mark on this gun and it will absolutely shoot.
I want 1500 plus fees thanks in advance
Ps: the rifle will b shipped from me to your ffl unless you wanna pay for a ffl near me to ship it for your ffl

For those unaware of what an XP-100 is, here's a pic. Ignore the red adapter. That was placed on there to allow me to try out my Lahar 30 on it. (Which actually suppressed very well)
This one is in 223. Barrel is 14.5" and less than a #2 contour.



I'm looking for something short, light and possibly still usable on an AR once in a while.

What I don't want to do is spend $1k or more on it.

Any suggestions on something that would fit my use case?


ETA: maybe I'm narrowing my search to much, asking for a 224 can???

WTB left handed MDT HNT 26 folder r700 SA

Custom built 7mm PRC Built by Rio Precision Gunworks
Caliber : 7mm

Action : Zermatt Origin SA 20 MOA Rail

Bolt Knob : Factory Sprial Extended

Barrel : Proof 20" Carbon

Twist : 1:8

Contour : Carbon Competition

Length : 20"

Muzzle Threading : 5/8x24

Muzzle Brake : TBAC

Stock : Manners Long Range Hunter Elite Tac

Bottom Metal : RPG M5 LA

Magazine : Accurate-Mag LA 5rd

Trigger : Trigger Tech Special Curved Clean Trigger



Gun is a tack driver just don't have the time to shoot it. Has 60 rounds down the barrel. Likes the 175g Hornady's.

$3900 for the gun without the scope
$1600 additional for scope included

For sale is a used but not abused Gen 1 ACC Premier. Has the short stock (12.5”-13.75” LOP), a new Premier Vertical Grip, MDT Aluminum bag rider, and full rubber dampener/“jellies” kit. It was painted and then stripped so there are tiny remnants in hard to see nooks and crannies.

$SOLD TYD via Venmo/PayPal. Ships UPS with tracking.

Looking for. Please call or text 616.291.2899

So I’m venturing into the foray of red dots on handguns.

Picked up an XD-M Elite in 10mm with the OSP plate.

Decided on the Holosun 509T.

Ordered “Plate 3” from Springfield and it arrived in three days.

When I called Springfield (they’ll send you one plate for free) to place the order I was told 6-8 weeks.

Well, I have two new toys in my possession and I’m not about to wait that long. So, I placed an order for one also.

That one showed up today. (Three days door to door. Well worth the $35 to not have to wait up to two months.

I went to put the plate on, and something didn’t look right.
I double checked my order with Springfield. Yep, plate three. Viewed the plate online, yep, looks the same.

Little did I realize, I need to mount the plate that came with the Holosun, to the plate that I ordered from Springfield. (And file the screws to mount the Holosun down because the Springfield plate is so thin the screws would bottom out on the top of the slide.)

Now, I was under the impression that when I ordered the plate from Springfield, it would be dovetailed to fit the Holosun.
Well, that would be too easy.

Cowitness? Not today. The 509 has probably better than 1/4” between the base of it and the top of the slide.

Rant over.
Anyone know where I can get one plate that both screws to the slide of the XD-M and is dovetailed to mount the Holosun?

Staccato XC with approximately 400 rounds through. It includes the following:

Red Dirt/DSC #2 flat trigger

Gen 1 STI grip stippled by McMullen Stippleworks

TTI Carry Magwell

Dawson extended mag release

DPO Holosun plate installed

Holosun 507 Comp Red installed

(2) 17rd Staccato Mags

(1) 21rd Staccato Mags

(3) 21rd Prodigy Magazines

Safariland 6354-RDSO X300 with QLS fork

Want 4000 shipped and insured have a great day! I am in South Carolina and meet for local drop off with in reasonable distance

WTS:

Zermatt origin action
Vision chassis
Proof 6gt comp contour prefit
Timney hit trigger
Vision Vulcan brake

Has 160 rounds in it exactly, rattle canned but originally black. Just looking to make more room in the safe.

Asking 2750 for the rifle.

Text nine 13 nine 61 three 520

It’s been two years since I posted “I don’t see the allure of 6mm ARC”. I see the allure now. My collection is rather small but everything has a specific purpose (other than my 16” carbine gas Colt LE6920 with the MIL/LE restricted markings). I’m not really a fan, but can’t part with it or change it. I want to build another AR and I don’t have anything that is semi automatic AND ACCURATE past 1k yards. I’ve got a 16” 308 barrel for my SCAR 17, but it stays in the 13” configuration. My 14.5” piston AR definitely isn’t coming close to 1k. My MRAD especially in 338 is certainly capable, but a low recoiling AR would be so much fun. I know nothing about the caliber or who makes the best parts. So far I was thinking
Final build:
San Tan tactical receiver set
Geissele 15” MK4 rail
Craddock 18” RTR 6.5 Grendel barrel
Superlative Arms piston kit
POF roller cam pin
Geissele SDE 2 stage trigger
Magpul ACS with BCM MK2 buffer
JP enterprises rifle length spring
Fortis K2 endplate
Radian Raptor SD charging handle
Radian Talon safety
NightForce NX8 2.5-20 in an ADM mount
HUXWRX flash hider
Atlas V8 bipod
I was going to use a HUXWRW flash hider and use my Flow Ti 762 and maybe get the Flow 6mm if I end up really liking it and want to keep a can on it.
It looks like Duramag are the preferred mags? My main concern is that it has to be 100% reliable.. are the mags there yet? I’m not too concerned with weight since it will absolutely be lighter than my MRAD. I get a pretty nice discount on ADM and NightForce products as well as Proof.. so it seem like going with them was a no brainer. The entire setup will run about $4350. Id also REALLY like to find a refurbished PVS30 to use on a couple of these. Anyone see any glaring problems? Suggestions? Could I go 18” barrel and a 15” handgaurd and be good to 1k?

Gents, I have been scouring the forum for info and I'm stuck in a feedback loop in my head. I want to put together a precision gas gun in .308 (because I have access to the ammo). This would be for range use, primarily, but I like to build duty-quality/reliability rifles. I had settled on Seekins builder sets for receivers/forearm because you minimize/eliminate the pressure on the barrel nut when you run the rifle on a bipod. I've discovered that they are very hard to find and expensive as hell when you do find them. My questions are these:

If not Seekins, whose upper/forearm combo is best for elimination of the input into the barrel when using a bipod? I love the direct forearm-receiver attachment but Seekins, Mega/ZEV, etc don't seem to be obtainable any more. I wish Larue had a large-frame builders set.

Am I going to spend as much money building one of these as I am buying something outright from JP (highly recommended) or an SP10 from Seekins?

I've been following @Bigjake83's posts regarding small frame precision rifle building and have used his formula to put a dandy small frame recce rifle together. I'd like to try it with a large frame.

Any input? Am I just spinning my wheels?

Thanks for your time.

Looking for a little help developing accuracy loads for my JP precision LRP-07 in 6.5 creedmoor. It shoots just about everything well I just haven’t found that magical load yet. Trying to find it without destroying to much brass. If you don’t want to publicly post your load PM me.
Thanks, Nick.

I have 1 like new. Only used for testing
Recoil X brake. Works on any suppressor using the dead air end cap threading.
Diligent Defense etc.

$160 shipped
PayPal FF or Venmo