*FOUND*

This is my personal M40A5. This rifle is 100% correct to USMC Specs down to the Black Oxide finish. To the best of my knowledge this is a complete deployment kit minus the Pelican Case and ARD. I have all books, accessories, Mags etc. I also have an extra Schneider barrel complete, chambered and Surefire break installed, wear out the current barrel (if you can) unscrew the old barrel and torque this spare on. To finish this off, I have the correct Surefire Suppressor for probably what might be the last run of those. Receiver serial number is roll stamped not the newer engraved "G" prefix, and in the correct serial number range, G6541006. Some of the parts are original issue parts including trigger, but not the stock. Scope is a USMC spec scope, but is NOT USMC MARKED. I could type all day about this rifle, but if you know the M40A5 well enough you know what this rifle really is. Some of these items are rare and only become available from time to time. If you are a serious buyer way more information and pictures on request. I realize this rifle isn't for the average collector, and the price isn't cheap, but for what is being offered it's more than fair.

Rifle can ship to FFL, Suppressor must go to a Class 3
I will provide correct Pelican Case with cutouts for an addition feeView attachment 8722892

PRICE IS NON-NEGOTIABLE $12,500.
DUE TO PRICE I AM WILLING TO BREAK INTO 4 MONTHLY PAYMENTS TO RIGHT BUYER.

Both brand new, sealed jugs. Local pickup only, cannot ship - near Columbia, SC (regularly shoot at Clinton House).

8lb H1000 $400
8lb Shooters World Precision Rifle $SPF

Some barrels I'll likely never shoot/shoot again.

AXMC Brux 1.350 Stainless blank, M30 threads
6.5 PRC SAAMI chamber by a local smith (Young's Gunsmithing – Sand Coulee, MT)
29" finish
Heavy Palma
5/8x24 Muzzle Threads
7.5 Twist
48 rounds fired
$595 plus shipping OBO

AXMC 6.5 PRC Chambered by MHSA, M30 Threads
specs on invoice
10 rounds fired
$925 plus shipping OBO

Unpictured, but also available is a Brux 8.5 twist in 300 Norma,
HV Contour
Cerakoted Pale Brown
29" long
3/4x24 muzzle
142 rounds fired
SOLD

Nucleus Prefit – Unfired
6mm Creedmoor
Sendero Contour
5/8x24 Muzzle Threads
22" Finish
8 twist
Chambered by Fisher T&C
Preferred Barrel Blank – stainless
$395 plus shipping OBO

Please use PM for additional communication. Thanks for looking.

Here is a very nice sig 716i tread in 308. I bought this installed an ambi charging handle on it and it sat in the safe. I don’t even think I fired it.

Still has the factory grease on the bcg.

India bought like 200k of these rifles and have been using it in their military.
Would make a sweet little DMR!

Nice proven system!

$1000 shipped



Paypal, Zelle or money order

Thanks!

Item removed

March F 3X-24X42, Illuminated, FML-1 mil reticle. D24V42FIML model number. Practically new and not a scratch I can find on it. Used very little.

Nightforce Rings, Medium 1" Ultralite Set. A101 model number.

Payment via Venmo or Zelle. Or old fashion check with shipping after clearing.

Prices include shipping and insurance.

Scope Only: $1900
Rings Only: $100

Scope and Rings - $2025

Hi all, I just installed a Lilja 18” stainless barrel on my CZ 457 and used a .300 barrel shim for headspace and when I shoot SK ammo the bolt is very stiff after the shot when I lift it up before pulling it back, but if I shoot eley ammo it opens nicely after the shot. I am guessing that it is a headspace issue but allI have is a no go gauge so Im not really sure if I got it right. The rifle shoots great but just noticeably stiffer with the SK , any suggestions?

I’m loading some 6 Dasher, 3rd reloads, Alpha brass. My question, and this goes for every round really, but should you trim. My brass is well within spec, however they vary individually by 20-30 thousandths in length. Is it worth trimming? Same general question for 6.5 Creedmoor. I’ll have cases ranging between 1.910 and 1.920, usually around 1.915-1.917, is it worth trimming them or only if they are out of spec.

This is for long range PRS and NRL shooting.

Excellent like new condition. Paid $215, will sell for $125 shipped. PP F&F.

I’ve been looking at getting a SP10M, stopped at a local shop that usually carries decent stuff and inquired about ordering one.

They said they just got one in in 7.62 and asked if I wanted to see it. “Sure, why not.”

They brought out a SPX, which I hadn’t heard of previously (but I haven’t followed Seekins). They had it priced in line with SP10M but I couldn’t initially find mention of that model online. I eventually found something about it being a previous model so I asked them. They responded they just got it from their distributor this week and it’s brand new.

I was half considering buying it just to have but I can’t find any real good info.
Does anyone have any knowledge on SPX vs SP10?

Cleaning out the gun room.

Weatherby 6.5-300 magnum ammo 90 rounds and Lee die set-$200
BCM QRF-10 new in box-$125
Armalite AR10 (308) barrel, 20"" rifle length gas port, never fired. $75.00
Ballistic Advantage modern series 20" (308) heavy profile, Yankee Hill gas block and tube, 82 rounds through it: $100
Glockstore pyramid flat face trigger system, tungsten guide rod, rear plate, mag plates and barrel. Glock 20/21-$200

All prices are shipped, Paypal FF/Venmo

All of the parts are brand new, never used. I put this together for this fall's backpack rifle build, but with both shoulders going down for surgery in the coming months, there's little chance it gets used. Parts list below.

Weight with CB brake and no mag at 6lbs 5oz., w/o the brake it should sit at 5lbs 11oz. Asking $OLD shipped and insured via DISCREET PP/Venmo FF/Gift or Zelle. I can add the TBAC CB .30cal brake and AccuMag 6.5PRC 3-rounder for $150 more.

• Defiance Anti-X SA Action .550 Magnum bolt
• Proof Research Carbon Fiber Prefit barrel, 22" 6.5 PRC 1:7.5 5/8-24 twist Sendero
• Trigger Tech Diamond 2-Stage PVD Black Flat Shoe
• Hawkins SA DBM5
• Manners Pro Hunter SA Micro Mini Chassis Back In Black with left side and bottom rear QD sling flush mounts
• TBAC CB Brake .30cal 5/8-24 (EXTRA $$$)
• AccuMag 3-Round 6.5PRC/.300WSM AW magazine

Brand new A2 carry handle upper parts list-

B King A2 carry handle upper (no feed ramps)
Larue Stealth 16” barrel (A2 feed ramps)
Luth-AR A2 rear sight
JP adjustable front sight gas block
Grey Ghost Precision handguard

This upper has exactly 10 rounds through it, just to test fire, performed flawlessly.

$500 shipped


Also for sale are two brand new handguards-

Grey Ghost Precision 9.25” handguard
$100 shipped

Battle Arms Development 9.5” handguard
$80 shipped

Hit me up with any questions, open to trades.

I am looking for a recoil lug to be able to use my TL3 barrel on my origin. I have both actions and I want to be able to put my barrels on any of them. Please PM me if u have one you will let go of.

Brand new MDT Comp brake 5.56/6mm $200View attachment IMG_2239.jpegView attachment IMG_2240.jpeg

Leupold Mark 6 1-6 with illuminated TMR reticle. This thing is in really great condition. $1500 shipped.

Steiner M7Xi 2.9-20x50 FDE MSR2, Tenebraex caps, no box, EraTac 1.65" rings w/ rail & level. Good condition, perfect function. $old shipped.

Zeiss LRP S5 3-18x50 ZF-MRi Ret 16, MKM scope caps, original box, Cadex 1.5" mount w/ rail & level. Good condition, perfect function. $old shipped.

Manners MCS-NS Night Stalker, short action. Micro chassis (requires a DBM). Don't remember what they call this color. Patch bedded on a 700 action to clear an MTU barrel under the NV rail set all the way back. Good condition. $old shipped.

PM for more photos. They're all priced right, so no I'm not haggling over rings or whatever. PayPal or Zelle.

Only trade (+$) of interest: Leupold 3.5-10x40 illum FDE M2.

Tossing around the idea of selling my 22 creed. Only selling because it's too light for my liking and I'm wanting to move to another 22 creed in a heavier setup.

Impact 707r round top 75 degree with 0 MOA rail (for easier zeroing of thermals).

20" Bartlein carbon rem varmint profile 1:7 twist with approx 300 rounds on it. Shoots factory 80 grain eldx around 1/2 minute.

Manners EH1 with factory added cheek riser (comes with more spacers).
Elite black with black webbing.
4 inch area 419 arca just in front of magwell.

Hawkins hunter dbm (picture shows regular m5 but it has hunter on it now).

Triggertech field trigger

Looking for $3200 shipped from me to your ffl.

More pictures upon request.

Can, thermal, rings, and bipod not included.

This was a special order rifle Mike built for a guy who wanted five titanium guns. Weight is 6 lbs 6.4 oz. I received it unfired and I (well, my daughter) put three rounds through it for function testing. Serial number is DF-51. 18" barrel, threaded 9/16. Scope/rings not included.

$8500 $7000 Shipped

I have some new never open G5 125gr sticker magnum broad heads and some new 125 he'll razor practice heads. $45 shipped for both.

The title pretty much says it all. It is a 12-42x56mm NXS (not benchrest) with the SFP NP-R2 reticle and .25 MOA knobs. High speed turrets, no zero stop.

Not looking for any trades in this. It is in good condition and comes with the pictured VTAC rings and factory sunshade.

$1400 shipped

SOLD -Geissele Blemula receiver and 16.5” MK16 tabbed set. Bought them a couple of years ago, mocked them up, but never actually finished the build. $350 SOLD shipped.

-10.5" Geissele MK4 DDC rail. Includes all the hardware. $225 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-Adjustable A2 Buttplate
-Surefire Picatinny Mounts
-Criterion .300 BLK Barrel
-Larue LT788
-18” Geissele SPR Barrel

For Sale: Ruger American Predator Gen 1 – .22-250 Rem – Vortex Crossfire II 3-9x Scope


Selling my Ruger American Predator Gen 1 bolt-action rifle chambered in .22-250 Remington. This is a lightweight, accurate, and affordable varmint/predator rifle that’s ready to go with a quality optic already mounted.


Caliber: .22-250 Rem
Barrel: 22" cold hammer-forged, threaded (5/8x24), free-floated
Action: Bolt-action with detachable rotary mag
Stock: Factory green composite stock
Scope: Vortex Crossfire II 3-9x40 – clear glass, dead-hold BDC reticle
Condition: Excellent – smooth action, clean bore, minimal wear


This setup is ideal for varmint control, predators, or range shooting. The .22-250 offers flat shooting and high velocity, and the Vortex scope makes it easy to reach out accurately.


Rifle is sighted in and ready for the field or range.


Asking Price: $ 375 (sold pending funds)
Located in Athens, TX. Local pickup or ship to FFL. No trades, thanks. I can take credit cards!!


Message me with questions or for more photos.

Had a perfect tuna trip yesterday - we went out of Venice, LA, with Go Long Charters (https://www.golongcharters.com/) - beautiful 42' Freeman catamaran with quad 300's, ran 280 miles total, 140 miles to their secret hunting grounds - hooked 10 sea pigs, AKA yellowfin tuna, landed 8, one I caught topwater wasn't a keeper. - easy ride on a smooth boat at ~ 40, 45 mph. Literally hooked up on the first cast and caught all of them within 3 hours in one spot then turned around and headed home, ended up with 190 lbs of tuna meat. Couldn't have asked for a better day - my twins first tuna fishing experience set their bar high.

Can't say enough good about Go Long and Captain Alex, on time, super professional, the best I've ever seen with regard to being patient with clients and keeping lines clear considering how many times he hooked us up on 2 at once. I will chose them again without a second thought.