Had 5bricks 2 sold so now


3 bricks for $165 shipped.

I have for sale a new in box Gen 3 razor.

$2425, shipped.

I have been trying to get in touch with Braden at Custom Gun Coatings. @Short-bus

I have emailed and sent PMs.

Does anyone have a phone number or some other way to get in touch with him?

Looking for a Nightforce 7-35 ATACR with Mil C reticle.

Latest visit to optometrist revealed that I need to have cataract surgery for my right eye. Bummer since I just bought a ZC527.

Can anyone recommend a cataract surgeon in the Dallas/Fort Worth area?

If you've had an IOL implanted, what type of lens did you get? Any issues or anything that you would do differently?

For sale is a Tikka CTR barrel cut to 16.5” and threaded to 5/8-24. Has about 200 rounds total on it. Bought on here and hunted with it this season, but putting my Tikka back to 7PRC config, so selling my barrel and bolt. $200

Standard Tikka Bolt that has been fluted by LRI, It also has an anarchy outdoors bolt handle as well as badger ordinance bolt knob $375 SOLD

One mag is a metal mountain tactical long action mag for the tikka inlet. $50

One factory medium mag (6.5 creed, 308, etc.) $35 SOLD

All prices are shipped, If you're in Texas, I live North of Austin.

Atlas V8 Bipod w/ Q Sert integrated mount. Like new $ shipped IN CONUS.

Will get pictures tomorrow hopefully. Gray. Short action 700 footprint, ambidextrous smoke carbon grip and butt stock, with a folder. $1000 shipped

I’m posting in semi for more traffic. I have an APO 700 boltgun and APO skipped the country so they are out unless I stumble across a used one. My 700 currently has the CTR and it folds. Just wondering if the B5 is the way to go for replacement or if Magpul Lite would be good. Maybe something else I haven’t seen yet on the market?

2-10 TMR Mil with illumination. Has been mounted and used but glass is in perfect condition.

$1850 shipped, only thing I might consider in partial trade is a triple pull ckyepod plus cash.

As new. 1030 shipped.

SOLD, Selling a set of 36mm ARC M-Brace (Low 24mm) Scope rings. $$ shipped to the lower 48.
PayPal F&F for the form of payment.

Clearing out the safe:

1 NIB FN Five Seven MRD includes Bag,2 mags and manuals. Traded

2: NIB S&W MP 2.0 40 S&W includes 2 mags and all accessories. Asking $550.00 shipped

3: NIB Glock G17 Gen 1 Classic limited Lipsey run all accessories. Asking $550.00 Shipped

Payment Accepted: Zelle, Paypal F/F, Venmo or certified check, Usps Money Order.

Please make sure you're FFL accepts from individual or I'll ask for you to cover those fees
which by past experience can run $50 or more.


email: [email protected] for fastest comms.

Trades: +/- cash

Trijicon RCR
Nightforce 4x16x42 ATACR in Mil Tremor 3,Mil XT, Mil R, Mil C
Sig Legion Flux P320
Sig Virtus Black Lower
Sig MCX Virtus black upper without barrel or handguard
Benchmade Bug Out 535-3
Microtech Makora DE Black
Microtech Socom Auto Black Blade non-serrated

a buddy told me about them, looks pretty neat. Just curious if anyone has anything good or bad to say about their experience.

I like the idea of a suppressed 22lr that lacks baffles.

Like the title says. Ideally NIB, but don't mind something gently used either.

If you don't have Positive Trader feedback here will need verification and only pay through a buyer protected method.

Taken straight from Dillion’s facebook page.

Meet the Dillon RL8000 – the world’s first AI-powered, voice-activated, coffee-making, self-cleaning reloading press. Engineered with over 8,000 moving parts (all absolutely necessary), the RL8000 doesn’t just reload—it predicts your favorite load data, plays motivational 80s music, and politely asks your spouse for permission before every large primer order!

I've seen some rumors swirling on other sites about a new SAAMI standard 7mm PRC cartridge rollout in the near future. Didn't see a thread on the topic here, so I figured I'd start one as a place to collect rumors, news and eventually load data once it's introduced.

I'm interested to hear what folks have heard, but from reading what little is out there, the consensus of rumors seems to be that the 7mm PRC is:
- Another Hornady introduction.
- A long action cartridge ased on a necked down (and maybe shortened a bit) .300 PRC.
- Slated for a fall introduction.
- Possibly similar to or even a straight standardization of the 7mm LRM.
- SAAMI standardized but not yet published.

Not sure who this guy is, but saw on another forum that he claims to have had some conversations with pew pew industry folks on he 7mm PRC (~14:20)

Login to view embedded media

Looking at the new cartridge section of the SAAMI website, it looks like new cartridge publications seem to come out quarterly (mid-Jan, mid-June, mid-Sept, etc) so if the cartridge really is almost ready to launch, maybe we'll see prints come out in June?

I've been planning a new elk rifle for a while, oscillating between 7mm SAUM, .280 AI, and .300 WSM. If this 7mm PRC turns out to be real, and is Intro'd and supported in standard Hornady style, it might be just what I'm looking for.

I am going to have a 6 mm GT built in the near future I guess a couple of months plus the gunsmith's lead time. Preparing for that "birth" if you will the baby will need feeding. I am at a loss for reloading information and if possible pictures of the grouping. Also having made that decision, I would like to find and information on the cartridge to add to what I already know. Any one please if you have your favorite load(s) and are willing to share I would appreciate it. If you have any articles or write ups on the cartridge I would appreciate getting anything you have to share.
I am just getting into the Precision Rifle discipline. It is really as much an engineering interest as it is a shooting challenge. Love to hear from anyone out there.

Selling radian raptor charging handle. Ar15/m16. Brand new never been open. $75 shipped

Selling 164 pcs of 1x fired lapua SRP brass. Sold my last 6.5 I could use these for.

Roughly 150 pcs cleaned and prepped, 14 or less haven't been processed.

$170 shipped

PP or venmo.

Leupold VX-lll 6.5-20x50 30mm tube Varmint Reticle scope.
Scope and glass is in good shape, works flawlessly.
Was 750 Now $700 buys it bare

Was $875 Now $825 buys it with Alumina Caps

Was $900 Now $850 buys it with Alumina Caps and Burris rings.

Prices are shipped to your door.

Price is Firm!!

#1 Our neighbors are fu!#$, this morning there was ton of debris piled up against the concrete pillars.....apparently it knocked them over!


#2 They just towed this fool past our house.
View attachment 8656726

Login to view embedded media
Login to view embedded media
They can take your cash, just like that.

Fascinating, isn’t it?

Login to view embedded media
The one - liner says it all…

…but you don’t even have to be charged with a crime for them to loot your cash.

I have a Taurus pt92 and wondering if anyone here have every put a slide and frame in a toaster oven for drying,kinda concerned on the possibility of the heat warping the frame.