From their Web Site:

Hodgdon® Announces the Passing of Co-Founder JB Hodgdon​

It is with profound sadness that Hodgdon shares the passing of John Brewster “JB” Hodgdon, who passed away on June 13, 2025 at the age of 88. A lifelong resident of Kansas, JB was born on October 16, 1936 to Bruce and Amy Hodgdon. JB grew up in suburban Kansas City and was extremely active in his hometown community with first responders, Scouting America (formerly the Boy Scouts of America), and the classic car community holding special places in his heart. He graduated from the University of Kansas in 1959 with a degree in Business.

In his career, Mr. Hodgdon held many roles at the Hodgdon Powder Company. In the early days, he packaged powder at the family dining room table. He led international sales and served as the face of Hodgdon at industry trade shows. He served on the Hodgdon board in various roles, including Board Chair, for many years and was named Chairman Emeritus in 2025. With his brother Bob, JB Hodgdon continued the legacy of Hodgdon Powder Company started by his father and grew the company into the preeminent supplier of gunpowder and black powder substitutes for handloading and muzzleloading enthusiasts. Hunting trophies from around the world and his firearm collection in his home and Hodgdon offices are a testament to his passion for hunting and shooting.

“I have been associated with the Hodgdon family and JB Hodgdon for more than five decades,” said Tom Shepherd, Chairman of the Board at Hodgdon. “JB was a first-rate owner, an incredible professional and a valued friend and counselor to work for during my career. He will be deeply missed.”
JB was a devoted annual supporter of the National Shooting Sports Foundation, a lifetime benefactor member of the NRA, a life member of the Kansas State Rifle Association and a member of the Safari Club of America, Pheasants Forever, Ducks Unlimited, and the National 4-H Shooting Sports. He was deeply devoted to supporting youth involvement in the shooting sports through his work with Philmont Scout Ranch, Scouting America’s National High-Adventure Base in Cimarron, New Mexico. JB and his wife Anne, through their charitable foundation, enhanced Philmont’s ability to support our nation’s next generation of hunters and shooters with a focus on safety. JB was inducted into the National Shooting Sports Foundation Hall of Fame (2020) and a co-recipient with his brother Bob of the NRA’s Golden Bullseye Pioneer Award (2009). Additionally in 2009, JB received the Shooting Industry Academy of Excellence Award.

JB is survived by his beloved wife of 28 years, Anne, along with his four sons, two stepchildren, four grandchildren and seven great-grandchildren. Though JB has left us, the legacy he leaves — of family, faith, hard work, and love for shooting and the outdoors — will continue to guide all of those who knew him.

Looking for a sig Mpx k. Hit me up

Just as title says I have a phone skope Skope vision gen2 mount that mounts to your rifle scope and it comes with a iPhone 11 case and iPhone 13pro max case and a GoPro 10 case all the cases for couple different models that are similar in size one case and the mount alone is 240 new I’m asking 200 plus fees for everything thanks in advance

I was able to send messages to other users, but I am now unable to. Was there some change to stop "new" users from starting conversations?

Like new, taken out of box, mounted and never used, Leupold Mark 4HD 6-24x52. Awesome PR-3 reticle.

$1010 for scope only tyd

Leupold Mark 5HD 3.6-18x44 (35mm) M5C3 FFP Illum. Tremor 3 Riflescope 176811

American Defense Manufacturing ADM 35mm Recon Mount 20 MOA w/ Tac QD levers FDE Part #: AD-RECON-20MOA-35-FDE-TAC

Includes all accessories. Prices are shipped ground to the lower 48. Payment via Zelle.

No Trades

Optic only $SOLD
Mount $185

I'm looking for now, what has become a LPVO. This is going on a 9.3x64 Brenneke, and will be used as a dangerous game rifle. 1-4X would be OK, but 1-6X is better. It needs to have an illum reticle and a ballistic reticle would be nice. I'm OK with Japanese glass, assembled in Philippines, but do not what anything to do with chicomm stuff. It seems that Sig, Arken and Athalon all have ties to china. Must have a smallish objective lens because it has to clear my express sights. MOA or MIL - doesn't matter as I won't be dialing this in the field. I prefer a SFP, but FFP is ok if the reticle is thin. I'd like to stay under $1000, under $800 is better.
CameraLand's site doesn't break down the features like the old SWFA site used to. That's why I'm asking what do you guys suggest?

Took my R700 223 Wylde with Bartlein HV 28" 8T and .080" FB out this morning and did a quick 9 shot ladder at 300 yards. Get an idea of pressure/velocity and find the upper node.

80.5g Bergers, approx .020 off, COAL 2.485", N540, Rem 7.5 and 2x fired Lapua brass. Shoulders bumped .002" and neck tension also .002"

It left me with more questions than answers, and didn't really show anything definitive in my opinion. The overall group wasn't bad, about 1 MOA for all 9 shots, but no real correlation to velocity/impacts either. Also, the jump in velocity of 70fps from 24.1 (2876) to 24.3 (2946) had me thinking I was around max, but there were no obvious signs of pressure anywhere. The jump from 24.3 to 24.5 was pretty normal again at 35fps. Not sure if I should creep up in .1g increments to find max with the velocity I'm already at, but I have a feeling there might be a node at that 24.5 (2980) area.

I also had something super odd happen and I can't explain it or figure it out. While trying to get my seating depths figured out, I had 3 extra rounds all loaded at 23.5 Only difference was 1 was really short at 2.4" and the other 2 were pretty dang close to where they were suppose to be at around 2.480". I figured I'd use the shortest one for a cold bore and see where it impacted at 300 and get a good zero to go off. Velocity read 2811fps. Ok no problems there. So I shoot the 9 shot ladder and the 23.5 charge showed 2829fps. OK still doing fine. Finished up the ladder and still had those extra 2 cartridges loaded at I decided to use them up on the 500 yard gong and get some more numbers from the garmin. I was shocked when the 1st read 3063fps. No hard bolt lift, cases look fine, primer looked fine, so I shot the last one and it was 3053fps. Again, no obvious signs of pressure. But my main concern and question here is how on earth was there a 225fps discrepancy in velocity with those 2 shots at 23.5 from the previous 2 at 23.5? I individually weighed each charge on a balance beam and I'm certain the Garmin is ok.

I was shooting for 2950fps with no pressure, as that seems about right for an 80g bullet and 28" barrel. I'm thinking 3050fps is definitely over pressure, even though I'm not seeing the tall tale signs. And I'm not even totally sure what to think of those 2 rounds that hit 3050fps at that low charge weight anyway.

Anyway I'd love to hear your guys thoughts and where you would go from here? Still better than a good day at work, but still a little frustrated also...

Target dot is 2"

ATACR 4-16x42 F1, Mil-XT (C615)

Bought new a few months ago and in absolute pristine condition. Comes with the original box and all its bits and pieces/manual etc etc.

No trades — $2149 (Shipped & Insured)

--------------------------------------------------------------------------------------

Rings for sale only to the buyer of the scope.
- ARC 34 mm rings Medium..(1.10/28mm) $125
- ARC 34 mm rings High…….(1.26/32mm) $125
Everything for $225

--------------------------------------------------------------------------------------
Please let me know if you have any questions.

Savage Axis II 280 ackley improved centerfire rifle with Boyd's Prairie Hunter Laminate .This is a new rifle that has never been used, fired or had a scope mounted to it. The rifle bolt has been cycled 30-40 times to break it in. the rifle itself has been a safe queen and needs to find a new home. 22" barrel, 1:9 twist 7lbs Please reach out to me with questions. $650 shipped conus

Brand New Geissele SSA-E X Trigger

$200 Shipped

Gen 2 Send It Level. Never left the house. Put it on, set up the fiber on one rifle, decided I like the old Send it better so going to let this go. It has everything that came with it.

$220 shipped. PayPal FF or Zelle preferred. If PayPal goods and services, buyer pays fee.

I have the chargemaster link and want an accurate beam scale to verify my charges. What's a consistent and accurate beam scale? I have an rcbs m1000 I think its called and it's straight trash. I zero it out then use a check weight and it's way off. I want a solid beam scale that I can use for a while to verify my chargemaster loads while I save up for the fx120i down the road.
Any suggestions?

Just going to sit there and let it burn?

Login to view embedded media

For sale is a Geissele Super Precision 34mm Cantilever Mount. Mount is new. Would not work the platform I intended it for. $225 shipped.

who comes to mind?

Login to view embedded media

ATLAS BIPODS W/ EXTENSIONS

I have 2 Atlas BT46-LW17 bipods, both have the leg extensions and rubber feet. One has the factory picatinny clamp and one has the GrayOps Arca clamp.

$250 for the bipod w/ picatinny clamp
$SOLD for bipod w/ GrayOps arca clamp

Price noted includes shipping

NSN: 1005-01-541-1772. Brand new grip pods, polymer covered stainless steel legs. Bulk is 150 grips for 3,900 plus shipping

$32 per shipped

I’m selling out all of my PRS equipment . Nothing wrong with it, I just don’t have time, patience or the love for it anymore.

I’m not going to post pictures of everything being there is going to be a lot.

I’m also going to post stuff in 2 or 3 different treads so I don’t lose track of what sold and what needs shipped.

I will honor the first “ ILL TAKE IT” by PM only. Just trying to protect everyone from scammers.

I’m am completely willing to send pics and video chat with the buyer.

Payment preference is a money order!! I do have PayPal but I prefer not to use it

LETS GET THIS STARTED!!!!

#1 complete PRS rig $6900 chassis and trigger sold
SOLD Impact aw cut $1200
SOLD Bix two stage
SOLD6 dasher Kreiger HV 7.5 tw 130 alpha $400chamber ( shoots amazing)
SOLD MPA matrix pro 2 with full weights in and out. Has grey ops XL weights out
SOLD Zco 527 MPT 2 15 mil turrets and a spur 6001 sun shade and caps $3200
SOLD crush it timer
SOLD MDT send it with Brandt build
APA fat bastard
SOLD Grey ops bag stop
I am willing to part out this rifle

SOLD#2 2- Botnia MAXI 6.5 brakes $500 each shipped

SOLD#3 AMP mark 2 DB $1500


SOLD#4 ZERO PRESS $1400
It has 2 turrets, a 419 riser, trays for the back and it has the ram that you can change out the spacers

SOLD#5 Henderson GEN 3 trimmer powers $700

SOLD #6 giraud power trimmer $450
Needs a new shield around the cutter head
Case holders— 6.5 PRC, .223, 6 creed, 6 Saum, 338 LM, 308, 22 creed, 300 WSM, 6 dasher
Extra 6mm cutter head

SOLD#7 roughly 3300 115 DTAC uncoated $1020
35733 lot. All the same

#8 Berger 109 HT roughly 1300 $624
Lot 3636

SOLD #9 impact AW action $1200

#10 alpha brass 6 dasher
SOLD 300 virgin $120 each
SOLD 200 same lot as above. Some loaded and some 1x fired ( loaded 30.4 varget 109 ht) $200 all
SOLD Roughly 1000 2x fired. Same lot. Ill count but I’ve lost a few at matches $750
Roughly 1000 3X fired. Same lot. $650

SOLD#11 300 Peterson 6 creed. Unopened. $250

#12 Leofoto summit LM-364C with telescoping added and a cheap head $450

#13 2 vets QDT V2 with two vets head. $800 419 clamp ( used 3 matches)

#14 swaro NL PURE binos $2600
Has RRS arca


SOLD#15 OTTO noise barrier $275

#16 grey ops aw mags $140 each
SOLD2- BR mags
SOLD2- GT mags ( works great for dasher)

SOLD#17 cortina 6 dasher dies w/ bushings $230

#18 21st century hydro press 160 psi $370

SOLD# 19 Dillon 650 all set up to mandrel, prime, dump powder, feed bullets and seat bullets. $1700
Prefer not to ship.

SOLD#20 varget roughly 10 lbs same lot $450
Pick up only

#21 RL16 7.5 lbs same lot $350
Pick up only

This will be posted in multiple places. First come first served.

EDIT: Price Drop

Dillon 750
Casefeeder with 3 plates (SP, LP, SR)
MBF with 4 conversions (223, 9, 40, 45)
1 extra powder measure
Single stage conversion
2 extra short toolheads
6 extra normal toolheads
IF tall mount
6 conversions, 9, 40, 45, 223, 308, 44mag
4 micrometer rifle powder bars (DAA)
spares/etc
toolhead holders
casefeeder plate holder

Lee dies. these are in rough shape, Evaporust will clean them up. Buy everything, and I'll throw all the dies in for free

all the dies, extras, etc, are all free.

750 is a little rough, but will clean up fine, or I can ship it direct to Dillon for a refurb ($150) and have them send it to you direct after refurb.

I'm pricing at 65% and including a lot of free stuff due to condition. Thanks!

Shoot me a text at xxxx and i can send you a ton of pictures. There are not on this laptop

Im looking to buy Mags for my Victrix Venus T 6.6CM but am struggling to confirm what fits - any advice from experience here?

Im struggling to find original mags so I asked Victirx and they replied:


Regarding your inquiry, while the Victrix Venus T is based on a Remington 700 footprint, please note that our magazines are proprietary. As such, we cannot guarantee full compatibility with aftermarket magazines, including AICS or AW types.

Im hoping some one here is ahead of me and worked out what works - Im currently looking at AI AICS Mags with A419 bases but want to ensure they fit before I ship them to South Africa.

Selling my mount, FDE model. Works perfectly. Only cosmetic blemish is the lettering on the side.

$125
$90 shipped CONUS

Looking for a unicorn. I’m searching for a cobalt kinetics upper receiver. Preferably fde or green, but would be open to any color.

Have an extra rail sitting around and I want to put it to use.

PFA.

New short action Magpul 700 bolt action magazine well with 5 rd mag. Part# MAG497 $Sold shipped lower 48 Paypal f&f