**Sold****

FS/FT Vortex fury HD 5000 AB range finder binoculars 10x42.
Everything works as it should. Comes with lens caps, cleaning cloth, directions, original box and I’ll include the vortex post and tri pod mount.
$950 shipped. If you want insurance, that will additional.
I’m interested in trading for scopes or Vectronix 12x42 binos. I’ll add cash where needed.

I got into hand loading loading .45acp, 9x19 and 5.56x45. Just making decent but plinking ammo, long story short I went for mostly LEE products and grabbed one of their Challenger presses which was a new thing at the time I believe that had the locking bushing to quick swap dies so I didn’t have to redo setup every time I changed a die….

Was still annoying and I hate single stage for doing a lot of ammo, BUT that press was good enough to get me going, learn and make some ammo.

Now I have shifted focus less on volume (thank goodness as that was the wrong tool for that job) and more on precision.

I have my doubts with the bushing system of that press…. And so I’m wondering where to start looking to make match quality top shelf ammunition. I have a set of Lyman .308 dies i inherited, I recently bought a .308 bolt action that’s heavily focused on long range accuracy.

Would I be wasting my time with that press? And if so, what’s an upper end of the bell curve value press that’s not going to break my wallet but I can rely on? I don’t have Dillon compound press money….and since this will be low volume, I’m absolutely more focused on accuracy and repeatability, so single stage is what I’m after here.

Hey guys,
milling a slide is just a pita over here, so I´m looking for a good alternative.

Are there bulletproofed solutions to mount a red dot on a Glock without a slide cut?

I want to add a Steiner MPS on a Glock 31.

I´ve found this on youtube, beginning at 2:55 min.:
Login to view embedded media
But no Steiner MPS (Aimpoint Acro footprint) there.

Read a rumor a while back i believe on here about how the mdt XTN folding stock works with the solus chassis.

Anyone tested this? Ill die of old age before Aero comes out with the folding stock. Love the solus pistol chassis with my impact action but dont want to go the folding 1913 route.

Appreciate any help gents.

Hello for sale I have a brand new unfired MK13 Mod 5 that was built exactly to spec, the rifle was built by Red Bull armory. Correct G prefix action, navy seal surplus return stock and NV rail, seal return pelican case with 7 mags, night force nxs 22x mor c reticle with the era correct slow speed turrets. No short cuts were taken in this build this is a turn key rifle you just need to sight it in. Please don’t ask for trades, I’m selling to fund a motor build for my truck. Thanks!

$8000

BLUF: Lots of parts and backstory, $5100 shipped

I’ve had this for about 2 years and I initially got it as a Gen 1 Titan chambered in .40 without an optic cut. I sent it out to DSC gunworks to get the following done:

-Recoat entire gun
-Bronze 9mm barrel
-Cut for Atlas optic plates
-Trigger job
-Cut for flashlight rail (if you have a good eye you’ll notice that the recoil lug slot isn’t as far back as it should be and you’d be right, the manufacturer info is on the bottom and he cut it as far back as possible without disrupting that. You can still run a X300-B if you remove the lug and just clamp it on the sides super tight. Lame, I know imagine my discontent when it was done without knowing that upfront)

Since then it’s got at least 4,000 rounds on it if I had to guess. None of the wear you see is from being negligent, I just used this gun a lot in dry fire and to be a USPSA gamer.


Includes:
-Gun
-Holosun 507Comp
-5x 23rd (as configured) 9mm mags 140mm
-3x 140mm MBX mags for .40cal
-3x various holsters, 2 have QLS forks
-Atlas Iron sight plate
-Dawson Ice magwell with 1 used and 1 brand new insert
-3x different extra triggers, one red dirt, one infinity, one that I cant remember
-KKM .40 cal barrel with appropriate spring
-Atlas recoil spring tuning pack
-Wilson shock buffs
-6x Staccato basepads and springs to return the modded tubes to factory
-4x Grams spring/follower with TTI basepads for Staccato tubes
-Atlas thumb ledge
-Standard slide stop
-MPA shielded safety
-EGW mag release paddle
-Case
-Additional small parts not pictured


Gun and case ships to your FFL, all else will go to you direct. Insurance not included.
View attachment IMG_3782.jpegView attachment IMG_3783.jpeg

WTF???

Linked on Citizen Free Press

Login to view embedded media

Title says it all, looking to buy one for around the 2k range, which a few have sold in for in the last year.

No 1 Redding Competiton Shellholder Kit - $40 tyd


No 6 Redding Competition Shellholder Kit - $old


Hornady Comparator Kit - $40


Defensive Edge 260 Terminator Dies - $100


Mighty Armory 6BR Sizing Die (needs decaping pin) - $50

Curious if anyone makes a retrofit kit to get rid of the stock skins for accuracy international rifles for a modern aluminum sides and aluminum front rail system?

PRSTF MDT SendiT + CrushiT Dual Mount.
SendiT and CrushiT devices not included, mount only.

$old.
Discreet PayPal Friends and Family or Venmo gift.

Looks interesting. For a CMMG conversion kit.

So the 13th body pulled out of the water near Milton Mass. several of which had been dismembered- and the authorities are saying g”no evidence of a crime or a serial killer “.

It’s probably drunk homeless people dismembering themselves and jumping into the water before they die .

Weather looks bad for a scheduled hunt on Monday. Rain in the morning the thunderstorms in the afternoon. I’m assuming they will be moving in the morning to the feed piles…. Good or bad idea to still go?

Wasn't he in a El Salvadorean prison?

Login to view embedded media

Like new barrel made by Criterion Barrels - this is prefit for the Origin action or Solus. I purchased this last year and kept it as a spare barrel. Has approximately 20 rounds down the tube. 26" - Varmint contour SS - muzzle thread pitch 5/8" x 24.

SOLD $280 CONUS. I can take a card + 3% or Venmo/PayPal discrete. Thank you.

Also, please don't comment on my post (scammers will message you). Just send me a PM. I will go off timestamps. If you would like to talk over the phone to verify or FaceTime, no problem!

Login to view embedded media
Login to view embedded media
Login to view embedded media



Sooo…


Along with “Civil Asset Forfeiture,” which was recently in use…

We now have this.

More nonsense heaped on top of the already intrusive yet ineffectual GWOT interventions.

“Ohhh, it only affects foreigners.”

Suuure…

It's ALREADY affecting Americans.

They want to search your phone or tablet - should you refuse, it’s seized for “further evaluation.”



There are many other amendments beyond the 2nd, just saying.

We think we're patriotic championing the said Amendment, but are probably simply too ignorant to pay attention to the rest

It’s a slippery slope, and we’re rapidly heading there…

That's a mouthful - full c1 max setup for the low low.

It's been mounted/paint marked. They finally came out with a direct mount for the fix, only reason for selling.

C1 (1.3" in height 20 moa built in) max in tan, clif 9 slot in tan, cap in tan.

Would like to sell together - $400 ppff or Venmo.

Noob here, with noob question: I've read I should set my shoulder bump to -.002" from fire brass length. Well, on checking my die setup, I'm at -.0015"...should I bother chasing that last-.0005"?

B5 collapsible precision stock. Medium cheek piece. FDE color. $140 shipped.

Vortex Strike Eagle 1-8x24
Leupold Scope Mount
First owner; used once
$350 shipped

Safariland Liberator 2.0 Hearing Protection
-TCI-LibHP-2.0-Blk
-Black
-Over-the-head suspension

$359msrp

I have 2 sets already, don’t need these 2.

$280 for 1
$520 for 2

This has been hanging out in the pile of potential future build parts for a while and I just don’t think I’m going to get around to using it.

Proof Research Blank
20”
.264
1:8
Carbon Fiber
#105504

$650 shipped

Cross machine drt 13” mlok rail. FDE color. Brand new. $100 shipped.

LG 404 laser grips for officer/compact 1911

$125 shipped