I have 470+ pieces of once fired 308 FGM brass.
$150 TYD included the ammo can in the pics.

American defense 35mm low 0moa quick detach mount. I have been using these mounts for years, true return to zero mounting option.

$160 shipped.

Does anyone have a Zermatt action wrench they would be willing to loan or sell to me? I cannot find them in stock anywhere. Or does anyone know of an alternative that fits the RimX action well?

Shipping negotiated all depending on what you want

Forster 308 Neck size die
#006621 $60

Forster 308 Seating
Benchrest #006251 $45

M110 K1 upper build(clone like)

Factory SR-25 upper (Not Cartel!)
KAC URX 3.1
HTX 16” 6.5CM barrel, Dimpled by Templar
HTX gas block
KAC flash hider(pulled off previous M110 K1)
URX panels were/are painted. These were placeholders, I never ordered a new set.

Assembled and cerakote by D Wilson.

15 rounds through the upper and barrel. (5X FGMM 10X Berger 130)

Lower not included, photo for reference

No trades.

$5500 Shipped OBO

Update 3/27 see #39 below.

Have a 7RM with a 24.7" barrel and a radial brake on the end. Paired with a Zeiss Conquest v4 6-24x50 and Seekins 30mm rings. Scope will slip literally within 5 shots and slips every 1-2 shots afterwards per shifting POI and the pencil witness marks on my scope moving. Moved about 1-1.5mm in 9 shots.

The scope continuously slips rearwards (toward the butt of the rifle) in the rings regardless of what I do. I sent the scope to Zeiss to confirm that it is not out of round or out of spec - it's not, don't have the measurements they gave me right now, but off the top of my head nothing looked wrong with the numbers.

Info:
Have the torqued to 22in/lb (max per Zeiss when I called them). Torqued in normal star pattern and then torqued again once everything was tight, measured per Borka torque wrench.
Added powdered rosin - didn't help.
Did not alter the inside surface of the rings or the outside surface scope in any way. Also called Seekins for ring warranty and they sent another set - didn't help.
Tried ARC rings as well and had slippage too.
Have a radial brake at the end of the barrel - not sure if the change in recoil impulse is related to this but I've seen bigger rifles with bigger brakes that would induce a "faster and jerkier" recoil impulse (i.e. the jerk function) not have problems with "similar quality" rings.
Am not using a particularly hot load, heavy or light projectiles, etc. - i.e. all well within book limits for projectile weights and velocities.
Scope is not particularly heavy - 24.3oz - not sure if this has to do with anything practically speaking
Don't think it's how I mounted anything - have other rifles, including larger cal, and none have a scope slippage problem this persistent. One other rifle did have a much more minor slippage problem (much less slippage in 50 rounds) but that was resolved with 22in/lb on the rings (up from 19) and powdered rosin.
The rails do not slip in their pic slots and the scope base does not slip either.

Any ideas here or just get different rings? If different rings is the solution, any recs around or under $150ish - would like something not too large / heavy as this is a hunting rifle but don't mind something with a little weight to it. 1 piece mount isn't possible with the rails on this rifle.

NiB 307 Weatherby in 7 PRC
$1000

Looking for a set of Hawkins heavy tac rings or one piece mount in 34mm diameter . Lmk what you have. Thank you!

I tried looking around but haven’t seen many reviews on the new defiance 75 degree bolts? Does anyone have any personal experience with them? Im considering an anti-x with one for a hunting rifle build.

$55 shipped. https://mcleodprecision.com/products/the-bag-rider-v1-fits-mdt-acc-elite

CNC machined 6061-T6 Aluminum in our shop and Cerakote finish matched to the factory graphite black.

Flat bottom with full radius edge for ideal tripod rear support engagement. Top surface has grip ridge texture to it (smooth). Does not stick out at all presenting any snagging surfaces. Tapers to match the grip support width. All other edges have a radius and are smooth.

Attaches with 2 MLOK fasteners (provided) into the MLOK slot on the bottom of the MDT rear stock. 4.9oz weight.

Thank you everyone for supporting our small business. Come see our other products at https://mcleodprecision.com/

Let me know if you have one or accessories for one.

Sold $300 New, take-off Glock 17L longslide, complete with barrel. I think Gen 3, but not sure. Ported slide, adjustable white dot sights. Free Shipping

I am wanting to purchase a calypso mini AB. I’d be curious to see any feedback pros and cons with them.

Also I need to know what all I need to effectively mount it on my tripod. Please let me know,

Thanks

i have 5 boxes left. 80 a box retail at 118 on it website. selling them as a bundle 400

Chassis Foundation genesis 2
Hawkins M5 Bottom metal
RailingArea 419 Arcalock Rail
Bat Machine TR with 308
Modular Bolt Nose .480 Diameter bolt Face

2650 shipped

Hey guys,

Reposting this in comp thread as I hope it gets better traction!

Looking to get some feedback from the group running RMR/SRO/Aimpoint/etc on top of 20+ zoom scopes for target acquisition out to 900 yards. Is a more definitive small dot like a 1 moa RMR the way to go? Should an easier to pick up 6.5 MOA RMR be better? something in the middle?

Pictures with feedback is always appreciated. I would be running a Vortex Razor G2 4.5-27 and a Vortex impact 4000. Using a baldknobber diving board mount for the RMR/SRO for reference so i will be using an RMR. see below link and picture.
https://baldknobberarmament.com/34mm-rh-rmr-nf-diving-board-mount/

Tornado threaded Beretta 92 drop in barrel - $200

22ic + apex Head TVC-22i MK2 SOAR SERIES TRIPOD
1000 shipped like new

I am selling a daniel defense dd5 v3 ar10 upper chambered in 308 with bcg and charging handle . It's got the 16 inch barrel and adjustable gas block. I have fired approximately 50 rounds through this upper suppressed with a dead air nomad 30 cal can and it has functioned flawless. I have gotten sub moa groups using sierra match grade ammo. I will include the dead air xeno muzzle break.

$1200shipped.

Remington 700 stainless steel 26 inch 5r barrel action chambered 308

PDC Begara GEN 4 folding competition chassis

Jewell bn trigger installed with safety/ bolt release $1800View attachment IMG_8095.jpegView attachment IMG_8092.jpeg

Great condition only selling to fund a new project 800$hipped
View attachment IMG_8093.jpeg

Do PRS events allow shooters to know the distance of targets prior to the match starting, or maybe before each stage? Is the info on the card just generally to help with speed? Is putting wind holds on dope cards a thing, I imagine a match can take hours so the wind would be changing all day? Are people just generally writing out the card 4dof generates so they can have it in an easy to reference location like on one of those pic holders or strapped to their stock?

Cut for Origin action by Altus
Bartlein M24 profile 6mm Creedmoor 16.5 inch barrel purchased from Altus.
Weight is 4 lbs 3 oz
All work done by Altus Including cerakote.
1 in 7.5 twist
Approximately 140 rounds of Prime 107 6mm creedmoor rounds through barrel.
Was getting 2750 velocity on it.

$525 shipped to lower 48

Please PM me if you want it. I will only respond to your PM. I will not initiate a new PM. Happy to send dated pics before you send money so you know you are sending to correct person. Beware of scammers.

Looking to buy PN 25849 for AI AT models. This is the 20 MOA accessory rail that goes on top of the NV bridge. Let me know if you have one you want to part with. Thanks.

I seem to miss every one of them that gets posted here so I figured I would see if anyone has one they are willing to part with! Thanks!