Found some more of these. Sale includes the following quantities of bullets:
600 - Lot P01191302/2764018 (all sealed)
100 - Lot P01227803/1442119 (sealed)
85 - Lot P01191301/2754018
Price is $300 shipped to your door.
Not looking to separate lots, or for any trades at this time. Thanks.

I am the first owner and I used this optic on a pistol I dry fired in my house. No longer use the pistol and no longer need the optic. It’s in excellent condition. $SOLD shipped

I would like to sell

Nightforce ATACR 4-16x50 Mil XT
Geisele mount - SOLD
Halo bubble level - SOLD
Trijicon RMR - SOLD

I would like to sell as a package $2,500

NF ATACR $2,200 shipped and insured

This was on a seekins sp10 that I don’t shoot much since I have been focusing on bolt guns. I have a buddy that has been housing me to sell him the seekins so I’m left with an extra optic.

Thanks
Landon

Hello all,

I'm trying to work out a range log to help me keep track of results at the range. Currently it is in letter format, but I might try to condense it into a smaller page size. I'm sure I'm going a bit overboard on this but looking back over my notebook, I can see that I am forgetting to mark down key points. If anyone has a better idea or can offer ideas for improvements, it is greatly appreciated.

SOLD

$3299, $3,699.99, shipped to your FFL. No international shipping. See other restrictions, below.

I purchased new from JP Enterprises, and its just sat in my safe, unfired. So its time to pass it along. Here are the specs, and estimated current pricing of such.


I also added a JP arca swiss rail (JPHG-AP15, $110) and a Phase 5 extended bolt release ($60).

Not permitted to (and will not) ship to the following states: California, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Washington State, and Washington, D.C.

Prefer a certified bank check or bank money order. Let's get on Facetime so you can see the rifle, and have any questions answered. Please PM me to arrange a time. Be careful what you post in this thread as there are scammers waiting to pounce.

Thanks for looking and please let me know if you have any questions.

Greetings all. Happy dance, I think I have my sons AR-10's figured out - they are kicking out brass at 3 o'clock and shooting straight.

With that said, on the optics front we have a 3 bears issue - one is wearing a 1-6 Razor, the other a 4-16 ATACR, and they seem to agree too little, too much respectively.

I believe "just right" is the Trijicon AccuPoint® 2.5-12.5x42 Riflescope


Maybe I'm a bad father, but I'm an MOA guy and so we're sticking with MOA for the purposes of this. I'm too dumb to divide by 10.

So with that said - am I missing anything that would be a better value for the ~ $1000 range for a 2-12 (ish) scope?

This is for a 16" 308, so as a practical matter we're a 600-800 yard gun due to home range and ballistic reality limitations.

Requirements - illumination, holdovers built into reticle, parallax adjustment, $1000 ish ceiling, real warranty, hold up to AR-10, and I feel like the Trijicon is already on the porky and long side at about 14" and 22.4 oz.

Am I missing any better options?

Hey yall, looking for other input on a new optic going on a woods deer rifle. This will be going on a straight wall cartridge so max range out to 250y. I'm looking at lower magnification ranges 2-10 or 3-9 SFP. I've looked at many different options but seems like the "dedicated" hunting scopes are mostly 1in tubes. It's not mandatory but ideally I'd like to have a 30mm tube for better lighting. Statistically, most of my shots will be at first/last light. Illumination is not mandatory but would be nice, I feel that reticle selection is more important.

I've kind of narrowed it down to:
Trijicon Huron 2.5-10x40
Leupold VX Freedom 3-9x40
Leupold VX5-HD 2-10x42

What else should I look at?

2 Magpul LR/SR AR10 mags new never had a round in them
1 - 20 rounder
1 - 25 rounder
$30 shipped for both
Thanks for looking
Cross listed

Everything is used but not abused.
Everything is for AR10 / LR308 rifles
DPMS claw $80
Wheeler lower reciever vise block $15
Pacific Tool and Gauge upper reciever truing tool $55
Barrel extension tool reaction rod $50
Upper reciever vise block $40
Trigger fixture - prevents damage to reciever when dry firing $10
$130 shipped
Thanks for looking
Cross listed

Wanting to buy a Solus long action, plus if you have a 7PRC 20inch carbon attached to it but I know that is a long shot lol

Wanted to make this thread for a sticky post for the load data, for those who are shooting a bolt-action 6mm ARC. @Lowlight

*** In case someone else reads this in the future, DO NOT use bolt-gun load data in a gas gun. Bolt guns can handle a lot more pressure. ***

Loaded up my first round of load development for my 16" Christensen Arms MPR. I'm running 1x fired and FL sized Hornady brass, CFE-223, CCI 400's, and Nosler 115 RDF's seated 0.007" off the lands, which works out perfectly at 1.700" in my rifle.

I'm using Hornady Match Grade (bushing) dies & shell holder, with a Short Action Customs .266" bushing, giving me around 0.0025-0.003" of neck tension.

I'm running all the way up to 29.0gr in 0.5 grain increments (first round of data is pressure baseline and finding a rough node pattern). I'll report back my findings when I get out to the range this weekend.

This is an open thread, anyone can post up their guns, load data, groups, videos, rifle experiences, or questions.

Athlon Thermal Update

We want to give you an update....There is a new firmware update for the 25P-250 and 35p-400, this update is to extend and maximize the battery life of the internal battery.

Here is the LINK for the thermal firmware update

Please note that the OTA update through android phone still require the user to connect to the thermal wifi first, go to about section, and then switch a house/work wifi to check for updates (do not close the APP during wifi switching), and then click update to download the firmware to the phone, and then switch back to thermal wifi to transfer the firmware to thermal, and last power off and on the thermal.

OTA update through iphone does not require the wifi switching as long as the phone has data plan that allows the user to download via cellular connection, meaning the user can stay on the thermal wifi throughout the entire process.

Using your PC is the recommended way to update, please note your PC must have a USB/C port to perform the update!

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

I am currently building an electronic level and wanted to get some feedback on what features you all would like to see implemented. I know what’s on the market but I feel like there is room for improvement regarding functionality and feature set.
Please state your feature concept and why it’s you feel it’s needed.

~Jay

There used to be a thread on these on both the old site and the old-old site. I couldn't find it here, so I'm starting a new one. If this violates some policy mods, please kill it.

I make zero stops for a number of SWFA scopes. Details are below.

MilRad Turrets:
Fixed power non-HD models – the entire line. $27/set
3-15 X 42 $27/set
5-20 $27/set Note that SWFA recently declared the use of the shims on the 5-20 as approved. No more warranty issues.

MOA Turrets:
Currently Unavailable

There is an installation video here:

Login to view embedded media
Note that the video is for the original fixed power scopes, but the basic procedure is similar for all the different scopes. The actual number of shims and markings will vary from model to model.


maxordinateprecision.com

Hey guys,

Looking to get some feedback from the group running RMR/SRO/Aimpoint/etc on top of 20+ zoom scopes for target acquisition out to 900 yards. Is a more definitive small dot like a 1 moa RMR the way to go? Should an easier to pick up 6.5 MOA RMR be better? something in the middle?

Pictures with feedback is always appreciated. I would be running a Vortex Razor G2 4.5-27 and a Vortex impact 4000. Using a baldknobber diving board mount for the RMR/SRO for reference so i will be using an RMR. see below link and picture.

looking to sell a 6.5 creedmoor barreled action. It is a tuebor .478 bolt face, has about 450 rounds on the action. with a proof prefit CF 6.5 Creedmoor barrel with 124 rounds on it. looking to sell it. If you would like pictures be more then happy to supply, just don't want to give scammers pictures. I can face time or whatever is needed for proof of verification. Im looking for 1650 my FFL to yours. any questions or reasonable offers p[lease feel free to message me.

thanks for looking.

Have a 2 month old Nocpix Ace H50R I’m selling to help a friend. He bought this and used it a hand full of times during varmit season and now is looking to sell it. Unit is clean as it gets and works as it should. $4950 shipped

Brand new. Excellent condition. Looking for $900. No trades. I have a throw lever for it too.

I am new to the air rifle world so forgive me my ignorance. But I’m looking to purchase a long range air rifle (if that’s even a thing) and am wanting a caliber .25- or larger. Want it for coyote and possibly deer hunting. Also what’s the difference between the projectiles compared to regular guns? Thank you

Selling my 6arc build that was intended to be as close to perfect as possible, every part is unfired and was purchased new.

Build List:

18" Proof Carbon Fiber 6arc Barrel

SLR Adjustable Gas Block

Anodized EWS Ambi lower

Geissele SSA-E

Geissele Super Duty Upper

Geissele REBCG Carrier and eccentric cam pin

Alexander Arms Bolt

Reptilia ODG 34mm 1.5" Mount

Geissele MK18 handguard cerakoted ODG

A5 Buffer setup

ODG Geissele Airborne Charging handle

(Suppressor not included)

$3150 shipped

I bought a 308 POF rogue, it shot like shit. Tried 15 different bullets and reloaded my own. Best I’m getting is 2 MOA.


I called them, tried to get a barrel extension so I could buy a match barrel. They wouldn’t sell so I bought a barrel from them, spent the 6 weeks and what ended up being almost 500 dollars to get it rebarreled. Wow that was a waste of money. Gun shoots marginally better

Good news is I got my original barrel back and that has their custom extension.

Wondering if I can send my original barrel out to a smith and have him put that extension on a new barrel or if they are one time use item similar to head studs.

Looking to get a sub moa barrel that’s fluted.

Any recommendations for who to send it to if it’s usable?

Leupold Mk 6 IMS Mount. 1.5" Height. 35mm 0MOA.

New in box. Never mounted.

$200. Shipping not included.

(Pictures show 2 mounts. One has already been sold).

They messaged me with something for sale and used the "let me know if you're open to proceeding further" line. They have 0 posts since 2014 and their only feedback is from a recent scammer The Sheep King. And yes I have reported them.

Also, just reverse image searched and the pics are from a Feb 2024 sale ad on here.

Impact is in great shape, barrel has a few scratches on the finish but nothing major. 22” Bartlein #3b. Barrel has about 900 rounds through it. Will add the Triggertech Diamond for $250 more.

Barreled action $1500 shipped
With trigger $1750