Looking to buy:

AR15 SGT of Arms 15” Arca Handgaurd


PM me what you have.

I’m wondering if there’s anything out there like the Cz 457 MTR stock for a R700 platform. The specific features I enjoy most are the vertical palm swell grip and short grip to trigger distance. I have done some looking around and haven’t really found anything that gets you a vertical grip as close to the trigger except for the foundation centurion (not wood, but still a possibility if nothing else comes up)

I really prefer the look and feel of a wood stock but would like to get closer to the ergonomics that a chassis provides compared to a traditional sporter rifle stock.

The rifle is mostly used for local level comps and target shooting. Any insight would be appreciated

No Trades Pick up in DFW, TX or $SOLD Shipped

Daniel Defense DDM4A1 RIII 14.5” complete URG

Comes with a Radian Raptor Charging handle + original Daniel Defense BCG.

It has a Surefire 3 Prong (SF3P) pinned and welded to 16.1” OAL by D.Wilson Mfg.

Round count estimated less than 500.

Clean and RTG. The minor finish wear on bottom of handguard was from an arca rail and are not scratches you can feel with a finger nail.

Full specs:

The M4A1 AR15 style Upper Receiver Group is built around a 14.5 inch Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor, a GRIP-N-RIP Charging Handle, and our mid-length gas system. It features a 12.5 inch lightweight RIS III rail—modeled after the revolutionary RIS II two-piece handguard developed for SOCOM—features M-LOK attachment for lighter weight while still offering M203 grenade-launcher attachment. All Daniel Defense complete upper receiver groups come standard with an M16 profile bolt carrier group.

MATERIALS & CONSTRUCTION
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5″ Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense RIS III 12.5, Patented, 6-Bolt Bolt-Up System, CNC Machined of 6061-T6 Aluminum
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
Made in the USA!

Brand New Barsto P320 Full Size 4.7” barrel.
I waited almost 5 months for this barrel. It is a 1/10 twist. Project isn’t going to happen. My loss is your gain. Save some money he and save yourself a 3-5 month wait. Get the best barrel money can buy.
$215 shipped
Cross listed
Thanks for looking

1. Accurate mag 10rd no binder plate with seekins mag extension sold
2. AI Mag 10rd with MPA mag extension sold shipped
3.AI mag 10 rd with I think primal rights BR kit $50 shipped
4. AI mag 10rd with mdt BR kit $50 shipped

SOLD.

Non AB. Great condition, used quite a bit but still on original battery. No imperfections on the glass that I can find, only some light residual dust from the last match. Only selling to step up in glass quality.

Includes box and all parts as well as Vortex pro mount.

$500 shipped conus.

SOLD

Looking to buy vortex razor gen II 4.5-27 mil or moa is ok. Please reach out to me if you have one you're willing to part with. Please make me an offer. Thanks

MILs in Blue was used for maybe a week and looks brand new - $75 shipped


Zelle or cash app only

I tried out the catch all, but it’s too big for my needs. Has dual belt clips and side release closure. This config would be just over $100 with taxes/shipping.

$70 delivered

Looking to trade for a chassis after fiddle dicking a few I think that’s direction I want to go. I’ll probably regret it but either way we have a prs-tcs with sikes clutch rail. Back in black color way, double dead fill, couple use marks but overall really nice. Comes with the clutch and butt pad weight pictured. R700 SA and clones, right handed. Also have one of the new gray ops straight barricade stops not yet installed. TRADED

Stocks im looking for also in RH R700 :
-MDT ACC Elite
-AX-T
-cadex Strike pro or XS or possible competion
- possibly a vision pro
-possibly mpa vanquish
-possibly MPA BA comp with $ or extras

Looking for a prs-ish type rifle for some informal shooting with friends and dreams of a competition one day. Possible choices include Sig Cross HTX, Seekins HIT, Tikka Ace, Aero Solus and possibly Seekins PH3

I have a Tikka Superlite that hammers and I have shot the TAC A1 which was also a hammer. Tikka is a known commodity to me and I have confidence in them.

Sig HTX is on sale at Europtic, but I’ve never gotten to shoot one.

Seekins have a great reputation and a cool switch barrel feature.

Aero Solus seems to be a good value and I’m comfortable swapping barrels and basic assembly.

I am purchasing 6.5CM in whichever gun I choose. Looking for accuracy to be sub MOA for a ten shot group. Let me know what you’ve seen between all these guns to throw some info into my decision beyond what I have.

Thanks

In another thread (one that I'd prefer not to take away from, a side conversation had broken out between @lash & myself having differing opinions.

I'm trying to remain neutral on the topic but to voice my opinions on the matter- I find the Pledge of Allegiance to have socialist roots and find it to be more of a nonsensical practice that's spanned decades without being given proper scrutiny and anytime it's being questioned it was met with undue scrutiny and 'unpatriotic' accusations.

I doubled down and said that I didn't feel that the playing of our National Anthem had a place in any sporting events (specifically calling out Hockey and Soccer as not even having US roots). I further went on to say that I found both of these to be acts of 'false patriotism' (just what I called it) and that it holds no merit outside of the belief that how we "do it here" and ignores the actual background of either the Pledge of Allegiance being stated in schools or the National Anthem being played before sports (whether it be midget football or the NFL).

What's the Hide's thoughts on this?

If one is "pro" national anthem- another point I raised and would like to hear explained in this thread is why do we expect folks to not only play along with a public display of nationalism during the anthem, but why is it that we incorporate the physical removal of hats/headgear as part of that display? And also- do we "really" believe that to be equally important to demonstrating the proper 'reverence' to the National Anthem at least?

We don't expect women to remove formal hats, we've made allowances for practicing jews to keep their kippah on, we don't expect Americans that are Muslims to remove their hijab's or Sikhs to remove their turbans but it'd be argued that someone wearing a "God Bless the USA" baseball cap to have created a publicly unforgivable mistake to wear that hat during the playing of the National Anthem (even during a grade school/midget football game) and that's the only American we tend to take issue with (for reasons I guess?). What's different with the "God Bless the USA" hat wearer and what does the other exemptions have to do with being allowed on durning public displays of patriotism at events that have very little if anything to do with the USA?

Or... is it as George Carlin once argued (and I agree with)- is it simply some nonsense we just ultimately made up and have gone along with/argued against for decades/generations?

I can't speak for anyone, especially for @lash but I find these behaviors to be nothing more than nonsense carried over year after year and having nothing merit wise that they're often accredited as holding.

I'd go even further- I think we need to break these "sacred cows" down to what they are- just nonsense that was made up (and recently in our history for that matter) and move past that so we can address the more important things concerning our country/what I'd argue as being 'true' patriotism.

So what says the Hide?

-LD

Just got it, mounted it up & then took off rifle. All accessories included.

$2000 shipped
Zelle for payment

This would be pretty cool, especially using exhibition walnut. Should hold up just fine if not abused.


Colt Monitor R80. All parts have been sourced and ordered, work to begin shortly.

This


Into this

Just ordered this Surefire Can. Got this for my Remington CSR. Anyone have any experience w/ them or know anything? not very much out there on the internet about them.


8 inches 11 ounces sounds nice. I wonder how it suppresses.

Great condition
$315 shipped

Just send it to everyone!!!

Any smiths that can make this adjustable. ? Or make an adjustable one for it ?

(New)HK E1 stock brand new-$150

HK tungsten buffer w/spring-$70

(New)KAC HH buffer w/ spring (21057) -$120

KAC buffer w/spring (20387)-$70

154 KAC 5 rib rail covers-$770 for all

KAC irons front (99051) USMC stamped rear -$170

Just checking in, hello all! First day on the site, retired LEO. Looking to up my game and put some new tools in the tool box!

1. Armageddon Game Changer - 6# - $sold shipped.

2. Wiebad Plate Bag - ~4# - $SOLD shipped.

3. Eberlestock Butterfly Shooting Pillow - 1.4# - $sold shipped

Trying to find a needle in a haystack, either the 18" BSF or the 20 Proof drop in .204 ruger barrel for an ar15. If it is used, I need to know the round count.

Thanks!

OD green, R700 SA inlet, has additional bag rider and thumb rest, folding stock. Slight wear on arca rail as pictured, excellent condition. Asking $900 shipped and insured. Venmo, Zelle, or PayPal.

I’ve got 540 rounds for sale, would prefer to sell in minimum quantity of 100rds.

Sold

Venmo preferred

I'm looking at putting together a 300 norma for ELR purposes specifically to launch 250 A-tips . I'm a cnc machinist and programmer so I think I'm going to design my own chassis . As for the action I'm really drawn to the Surgeon XL . I was hoping some one on here might be able help me out and take some measurements of one so I could make a fairly accurate CAD model to design a chassis around . very rough cad model picture attached

just thought I would start this thread to document the progress .