New call, went out once with a buddy and didn’t enjoy the experience so I never used my call.

$200 shipped PayPal FF

$50 shipped
PayPal or venmo
(F&F or add the fee)
Or mail me a check

7 PRC Short Action Customs (SAC) Modular, new. $240 tyd. PayPal or Zelle preferred.

Got 2k Berger 153.5

Looking to trade 1 for 1 for 144s

Looking for someone around NC to avoid shipping costs.

Let let me know if interested

***SOLD***SOLGW Broadsword 18” .223 Wydle rifle. Has about 2000 rounds through it. Mostly AAC 77 SMK. Zero issues and can’t recall a single malfunction with my Ventum 5.56 can.

Have printed 1/2 moa groups before (picture attached) but realistically group closer to 1-1.2 moa, epically 10 round groups. 55 gr PMC X-tac is about 1.5 moa 5 round groups. Selling only to fund an AR-10. Kryloned and cosmetic wear.

- Giesselle SSA EX lighting trigger
- 3D printed bag rider on stock
- Annex Defense Arca rail
- FCD A2 style Xeno flash hider
- including the factory SOLGW Nox muzzle device

$1100 shipped to FFL or $1000 local north Houston area.

BT65 GEN. 2 CAL ATLAS BIPOD​

These have the non-rotation legs and KMW quick adjust tensioner. No field use at all, just one surface scratch (just the paint, you can’t feel it).

215 shipped

Hey I have a black A698 which is ultra mount 34mm 0moa 1.90. I’m looking for a FDE A696 which is 34mm 0moa 1.54 height.

Would sell the black one for $200. It’s basically brand new.

Ladies, are you tired of your man missing the target? Is he a shell of himself? Cure his work burnout and low T all in one shot by acquiring him LAPUA brass and Whidden dies in the lords caliber: 6mm Creedmoor! Cure his performance anxiety with LAPUA. With this beautiful hand selected choice cuts of Lapua brass and Whidden dies combination your man will appear instantly more attractive and will finally be able to perform and clean that stage at his next comp. Help me help you help your man. Buy my brass. You’re going to like the way he looks. I guarantee it.

195 pieces Lapua SRP brass 2x fired unprocessed

74 pieces Lapua SRP brass 1 x fired, FL sized, trimmed and primed with FGMM 205 primers

74 pieces Lapua SRP brass new, neck sized for tension with Whidden bushing die & primed with FGMM 205

72 pieces Lapua SRP brass new unprimed, untouched

Whidden click adjustment seater and sizing die set.

In total that is 415 pieces of Lapua brass and 6CM Whidden dies for $550 shipped. Now $499.99 shipped conus.

Possible trades:

KAC SR25 parts
Noveske parts
6.5CM ammo, brass or bullets
Badger C1 FDE 1.70 34mm
NF Ultramount FDE 34mm 1.54
TBAC SR brakes
TBAC bipod
Peq15 + cash on my end
Nightforce 1-8 ATACR + cash on my end

Steiner C35 Gen 1 clip on thermal scope. Comes with all factory accessories, 8 extra batteries and extra charger, Battery pack, 3x magnifier for hand held use, padded carry pouch. $2300.00 OBO USPS money order or cashiers check with good feedback. I do not have any electronic payment.

Area 419 Master Funnel Kit plus pistol adapter, lightly used. $70 tyd. PayPal or Zelle preferred.

Reloading Technologies Belted Collet Resizing Die, works on most belted cartridges, new. Retail $140, $70 tyd. PayPayl or Zelle preferred. Learn more at: reloadingtechnologies.com or https://larrywillis.com/

Cases available

Price is per case of 200rds each

Sig .308 175gr OTM $300 Shipped TYD

Sig 5.56 77gr OTM $260 Shipped TYD

Accepted payment is zelle or money order.

The 175gr shot really well out of 2 AI’s and a few surgeons, it’s good stuff.

Looking to get around 300 pieces of Alpa 6 Dasher brass. Looks to be sold out everywhere.

Thanks.

Listened to this today on a road trip. What a complete POS this guy is.

Constantly talks about himself like he's the messiah and nobody, I mean nobody does it better than him and California. He likes the smell of his own farts.

He's attempting to rebrand himself ahead of the next Presidential election without actually telling you he is going to run. All of a sudden he's against trans people in women's sports, likes fossil fuels, and guns.

He was gifted a Sig pistol at the start of the show, too bad it wasn't a P320....

Hey Guys,

I'm trying to dial in a picky 7PRC build with a proof pre fit and after learning that Hornady Brass can be sub par, I bit the bullet (bad pun) and picked up some ADG brass to work off of. I'm on 3 firings with it now, and surprised that the ADG brass has not grown at all even having been fired 3 times. Using a hornady headspace comparator, the virgin brass measured 1.8905 - 1.8910. After three firings, its still measuring the same at 1.8910, and still seems to chamber without issue. Because of this, I've just been full length sizing the brass with the smallest redding comp shell holder for a .000 shoulder bump (i.e. no bump)

In comparison, Hornady brass after two firings seemed to grow as much as 1.8925 - 1.8930 (which I'm assuming is softer brass). It seems like at this point, it just starts to get tight in the chamber.

So, for all you experienced handloaders out there, does this seem normal? Does it make sense that premium brass wouldn't grow to chamber size after three firings? Also, does it seem strange that virgin ADG brass would only be like 1 -1.5 thou smaller than my chamber right out of the get go? Lastly, if this all seems normal, would you bump the shoulder back .002 or continue to not bump the shoulder until the fired brass doesn't chamber anymore.

Thanks for any insight!!

Looking for a 224/6mm hellfire...

Good Morning!

I've been thinking about a guided hunt in 2026 or 2027, but don't really know where to start. I'm thinking whitetail, mule deer or pronghorn, and I live in KC so I'd like to drive rather than fly. Wondering if anyone can recommend an outfitter they've had good experience with?

Im not sure what additional info might be helpful, but I'd say my budget is around $5k or less, I'm thinking something like 3-4 days, and I shoot comfortably out to about 400 yrs (which makes me think a western hunt might not be right for me). I'm decently fit, so could hike, and my current deer hunting experience basically involves box blinds over large ag fields......kinda looking to try something a little different that won't crush the bank account too bad.

Thanks!
J

Anyone see the release or is this just new to me?

Can anyone provide dimensions? Is it all new or longer then the 142 or have they found away to stretch/thin the jacket to get the weight? Just wondering if these would see 2700+ with the standard 6.5 Creed loads. Claiming a BC of .713

It's a step but not a big enough step (IMO the NFA is un-Constitutional and should go away like the ATF).

Basically, the proposal would bring the $200 tax to $0 but you would still have the commie NFA registration.

A new mars lower with lpk and winter guard. The trigger is a cheapo and the stock doesn’t come with unless adding extra $$

350 shipped and pp f/f.

I have more feedback on tacswap and ar15

The title says it all.

I just picked up a Rachel Precision Brux on a RimX action with the ModX bolt.
The guns shoot beautifully- tight groups at both 50 and 100 yards.

But here is the issue — I have 2 RimX mags with extensions and they are well built, but no matter how I adjust them, they do not feed consistently, so I decided to try a polymer Vudoo mag, as I had some with me and BINGO—- flawless feeding—— has anyone else experienced this.

When watching the rounds feed, it appears that the round hits the chamber a little low and shaves some lead and the cartridge hangs on the lower (6 o clock) aspect of the chamber. Probably about 1 in every 20 rounds does it. SO…… I adjusted the mag to sit as high as possible however that did not fix the problem— I believe the issue is the angle on the front edge of the rimx mag.

The Vudoo mag on the other hand feeds flawlessly over hundreds of rounds.

Thoughts??

Sig 226 elite optics ready with an sig dot, 2 mass, single action, $900. CZ 75 p01 cajunized and milled for an rmr-cc dot, holosun not included on it, $800. HK USP-9 tactical with a trijicon rmr $1600. I am looking for the following things on trade. Nightforce nxs or nx8 optics in moa, bolt gun in 6mm dasher, 6mm br, 6.5 creedmoor, B&T apc9, can take or add cash depending on the deal.

Triebel Full length resizing die, Triebel Benchrest Seating die, and Benchrest neck sizing die. Creedmoor Sports, the US distributor, is not going to resupply their current Triebel inventory so just wanted to inform anyone interested. I bought the 3 die set from someone on here a week or so ago and wasn’t aware of that so I want to be up front and honest. I assume parts can be ordered from other places in Europe if needed. $320 shipped for all 3 dies and forms of payment are Venmo or Apple Pay. I will sell as a set or individually.

I did contact Triebel directly and was told they would sell directly and one of the issues is the tariff situation. The seating die has the correct stem for 6.5cm and I used it last night to seat Berger Hybrid Target bullets and know it works with Hornady ELD Match also. If for some reason you needed another stem you'd have to order from Triebel if Creedmoor Sports doesn't currently have it.

Selling my pulsar thermion 2 XG50 LRF. Original box and paperwork. Bought new for $6000. Comes with 3 batteries, charger, scope cover.

$4000 obo. Message me for more info.


Thanks!!