TriggerTech Special, 2 stage, flat, Rem 700

Got this for a build that was cancelled. Box has been opened, trigger was never installed.

$225 TYD


https://triggertech.com/collections.../remington-700-single-stage-trigger-special-1

Anybody tried this stuff? Expensive.

I have the following devices and would like some help figuring out the best connectivity topology to integrate them all and push the real-time target card to my Tactix 8 watch.

- Garmin Tactix 8 with Applied Ballistics (Elite license)
- Kestrel 5700X Elite (AB Elite license)
- Sig Kilo5X rangefinder (BDX-X, BDX-U) Says Ultralight for the device but no upgrade path I can see.
- Garmin Cero X1 chrono
- iPhone 16 with AB Quantum, Garmin Connect, Kestrel Link, and Garmin Shotview.

Latest firmware installed where needed.

So,
I’d like to be able to laze a target with the Kilo5X and use the Kestrel for my Environment variables (wind, temp, barometer etc) and use the chrono for real-time muzzle velocity data. I’d then like to either use Kestrel or AB Quantum on my phone as the solver and push the firing solution to my AB enabled Tactix 8 watch.

I’ve been able to pair and see the Kestrel, the Tactix 8 watch, and the Kilo5x in AB Quantum on my phone, but AB only allows one device at a time to be active/connected.

This has been the primary source of my frustration but on top of that the results on my watch do not appear to mirror what is in the AB Quantum on my phone, even though I do see the profile is being sync’s on my watch.


The elevation on my watch is off by a few .mils or more and the range never updates, as well as the direction. It appears to be working but not really working. Basically my watch is showing results that conflict with the firing solution in my phone, so the watch results can’t be trusted, thus worthless.

Am I missing something obvious in my AB configuration that allows for live updates?

Is there a better workflow for the device connectivity?

Should I be using another app to join all of these devices in a shared network? Or is there a daisy chain topology that would be better suited? Just really surprised AB only allows the single device at a time thing.

Any help or suggestions would be greatly appreciated!!

Thanks in advance

V/r,

-rB

Brand new. Never opened. It's a Black 5-25x56. I changed the direction of my build, so I don't need it at the moment. I'll post pics when I get home this weekend if it hasn't sold, but we all know what they look like.

$xxxx shipped via Paypal F&F, Venmo, or Zelle.

——Shooters——-
I want to introduce you to this product I’ve spent some time developing and producing
—-The back up Box—-
Everything you’ll need all in one location, at the range or at the match. It’s all here in the box.

The product is air tight. Waterproof and strong.
Here’s everything it will hold
Trigger flat and curved, Bolt, Ear Pro, Turret, Send it( old style fits by removing cover), Crush it , punch for the trigger, 25 dope cards ( small and large version) 4 pens or markers, loose Allen’s and screws

Battery’s : AA,AAA, Cr123, 1/3 ( send it battery), 2032

There’s going to be multiple versions available. All come with Exterior hard shell case, Top and bottom insert , folding divider with markings

First version : Impact / Lone peak bolt
Defiance bolt
Coming soon : Large Frame and Small frame Gas gun

Colors case : Blue, Red, Orange, Black
Insert color: White , Black, Red, Blue, Orange
( custom order available for extra)

Base price 150 w/o shipping. Shipping around 10$

Exterior dimension 9.5 L x 5.75w x 2.5 d

So, I've got a 700VS in 22-250 that's been sitting in my safe for over a decade. It was my first centerfire that I got when I was 17 (2006). I never shot it as much as I anticipated due to not having many places to groundhog hunt. Has maybe 200 rounds through it. Anyways, I've decided to bring it back out and I want to turn it into a lightweight walking varmint rig for 400yds and in. I need to get it threaded for my suppressor and figured I may as well chop it in the process. From what I've read, the 250 is still pretty quick even as short as 18" (~3500fps / 50gr).

My question is, will it be significantly louder suppressed at 16-18" compared to 20-22"? Also, will there be a significant increase in muzzle flip? Trying to find the sweet spot, but haven't found much data on it aside from velocity test. It's a 1/14 twist, so I'm limited to the lighter bullets unfortunately. It hates anything above 50gr.

Was this unjustified use of force, or were they just protecting one of their own?

Login to view embedded media

Selling my LMT - I just don't shoot that much anymore so I'd like some extra cash on hand - shoots very well - about 1/2 - 3/4 moa with Factory Hornady match ammo - can do even better with hand loads.

SOLD



Complete rifle can be had for $3100 shipped to your FFL - does not include optic, mount, bipod, etc.
*for this price I am retaining the SureFire Muzzle Brake for another rifle...barrel will come without a muzzle device. I will wrap it in bubble wrap / packing paper to protect the threads.

Complete Upper

LMT 15.3" MLOK FDE upper
LMT 6.5 CM SS 1:8 twist barrel - 500 rounds fired on it
Black River Tactical (BRT) 50/50 suppressed/unsuppressed gas tube
Surefire 7.62 Muzzle Brake / suppressor adaptor
LMT Semi-Auto BCG
Radian Raptor 7.62 Ambi charging handle


Complete lower

LMT MARS-H FDE fully ambi lower
Geissele SSA-E trigger
LMT MARS-H lower parts kit - LMT H3 Buffer tube kit with QD end plate
LMT Winter trigger guard
Forward Controls design ASF-50 ambi safety/fire selector
BCM MOD 03 pistol grip
includes (1) Magpul PMAG Gen M3 20 round

BNIB Flux Raider Chassis never had a slide mounted to it. Opened and optic mounted only. $475 Shipped

Selling (2) Accu-Tac Bipods

(1) New in box FD-4 - $275 TYD

(1) Used Older Model... don't know the model number but its the same size as the FD-4 with ARCA clamp (just not quick detach) $200 TYD

thanks for all i have

Holster and belt for full size 1911 32-34 inch waist $150 it was made by a guy close to me .price drop $125 obo

Hello all. Going through the safe and moving a few I don't shoot often.

Sig SSG3000(later version with integrated rail) in Vision chassis. Factory 308 barrel with ASR brake, plus a Benchmark 30-06 barrel as well. Purchased from member here. 600ish on 308 maybe 100 on 30-06. Meopta Optika6 3.5-27 mil/mil RDS reticle. Will include all Vision boxes, factory stock, hardcase, flash suppressor and tools. ***$3000 shipped*****(*

AR10 308. Ballistic Advantage lower with 45 degree ambi safety, excellent flat face trigger, Aero upper with unmarked Aero bcg, large lever ambi charging handle and 20 inch Ballistic Advantage barrel, ASR brake, Keymod rail, two Pmags included. Optic NOT included. 50rounds fired, excellent shooter. *****$1000 shipped.****

CPA Paul Shuttleworth custom Stevens 44 1/2 in 45-70. Absolutely beautiful rifle. Excellent wood, tiger stripe color case finish, 30 inch Badger barrel, Pope lever. Double set trigger, MVA Soule rear sight with Hadley Magnum eyecup, MVA front globe sight. In near new condition. I bought it unfired and have put 50 rounds of Trailboss loads through it. Can't see the sights anymore. Ships in hardcase with sight card, spare parts and tools. Now includes 100 new Starline cases and 100 500gr projectiles. *****$2600 shipped.******

Letting go of a couple things:
-McMillan A2 from latest drop. Has the L lug cutout. $1250 + shipping and insurance
-MRT stamped leather sling 06-11 $110
-Mk13 armorers wrench marked mod5/7
$65 shipped
-Harris ultralight 1a
$70 shipped

Vudoo V22 360
Nitrided RH action
26" Bartlein 1.2" straight contour barrel, 1:16 twist
30 MOA scope base
Area 419 bolt knob
Will also include 2x Vudoo mags with Anarchy outdoors +2 followers

Triggertech Diamond pro curve trigger

MDT ACC Elite chassis in titanium blue
- Full set of internal weights
- 2x mirage shields
- Vibration dampeners

Scope, mount, and send it not included.

Asking $SPF shipped for the complete package.

Would sell the barrelled action & mags (no trigger) for $SPF shipped

Really leaning towards buying a 20” ultramatch for a new precision AR15 build seeing as they are in stock and $400 seems lIke an ok price if they live up to higher end performance. I’m looking for 2 things:

1. Does anybody feel strongly about recommending something else for similar price?

2. Does anybody have a discount code for Rainier? I see their were a bunch of 10% off codes in the past but haven’t found an active one.

Thanks

There were two known Nay GOP Votes. Not sure which they are but I'd bet Massie is one of them. Perhaps Paula as well, but we'll see.

Anyone know of someone or have personal experience with cannons?

192 rounds of 140 eldm Hornady $275 shipped

Remington model 7 complete action cerakoted by me. MDT LSS chassis with MDT stock. Factory bottom metal and recoil lug included. The bolt face is .308

midgetoramaXGunny Sergeant
Rating: 3.1/5 this site
864 posts this site
338 Norma Loads
10/20/2014 Last edited 10/21/2014 by midgetorama

---

I am shooting a 9.5 twist Bartlein that finishes at 26".

With a 300 grain SMK I am getting slight ejector marks with 85.0 grains of IMR 7828 SSC and a CCI250 with Norma brass. Velocity is only 2715 fps.

The best accuracy with this bullet, powder, primer combo is 82.5 grains at 2632 fps. Single digit ES.

I am seating the bullet with a 0.025" jump.

I was expecting better velocity. I may try Retumbo eventually.
Rate now:
midgetoramaXGunny Sergeant
Rating: 3.1/5 this site
864 posts this site
Re: 338 Norma Loads
10/23/2014

---

300 SMK
GM215M
88.5 gr H-1000
COAL 3.565"
2690 fps with 12 fps ES over 10 shots
~0.233 MOA at 300 yards
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
10/29/2014 Last edited 11/03/2014 by xdeano

---

Thank you for getting with us at Berger Bullets. We are glad to forward our updated Berger Load Data for use with your .338 Norma Magnum.




Please do not hesitate to get back with us if we can be of further assistance for you.



Kind Regards,

Berger Bullets Technical Support Team

[email protected]

----------------------------------------------------------------------------------------------------------------------------
Hope this load info from Berger would help someone out.
Xdeano

Rate now:
waveslayerXGunny Sergeant
Rating: 3.2/5 this site
855 posts this site
Re: 338 Norma Loads
12/04/2014

---

300 SMK

3.60

Fed215

Retumbo 87.5

Velocity at 2712 SD=8

DTA, 22" .338 Norma Mag AI, a damn tack driver

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
12/15/2014

---

For those of you shooting Cutting Edge Bullets.

.338 Norma Mag. 225 gr, Cutting Edge, MTH D62 SF

O. A.L: 3.681" = 93.50 mm Barrel: 28.0" = 711.2 mm

!!! - YOU MUST START 6 grains UNDER LISTED, and WORK UP - !!!
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
12/15/2014

---

.338 Norma Mag. 252 gr, Cutting Edge, MTH D65

O.A.L: 3 .681" = 93.50 mm Barrel: 28.0" = 711.2 mm

! !! - YOU MUST START 6 grains UNDER LISTED, and WORK UP - !!!


Rate now:
Thrust911

XFirst Sergeant
Rating: 3.4/5 this site
2180 posts this site
Re: 338 Norma Loads
02/25/2015

---

Any more load info to share? Particularity the 300gr Hybrid on top of H-1000?
I'm interested in velocity people are seeing out of 26" to 27" tubes.
Rate now:
TheflyingpoleXCorporal
Rating: 3.1/5 this site
60 posts this site
Re: 338 Norma Loads
02/27/2015

---

Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/11/2015

---

Im pushing the 300 otms at 2785fps.
88.7grns h1000
Fed 215mag primer
In a 26" tube, suppressed.
It shoots very well at a mile.

Xdeano

---------------------------------------------
--- Thrust911 wrote:

Any more load info to share? Particularity the 300gr Hybrid on top of H-1000?
I'm interested in velocity people are seeing out of 26" to 27" tubes.

---------------------------------------------
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/11/2015

---

I have a good buddy that is using us869 in his 300rum pushing 230s. Ive thought about it, but what he is running into is a lot of carbon buildup, carbon ring.

If a guy is looking for a powder, definitely give rl33 a shot. Ive ran some of it and it gives excellent velocities.

Xdeano

---------------------------------------------
--- Theflyingpole wrote:

Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.

---------------------------------------------
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/11/2015

---

Here is some info on rl33.
97.7grns rl33
300grn berger otm.
215mag
2863fps 26" barrel
3.725" coal - single load.
Es 14.22
Sd 7.00
This gave me a 0.103" center to center group at 100yds.

I did a quick velocity check prior to loading for groups.
1. 95.0grn-2738fps
2. 96.0grn-2788
3. 97.0grn-2732 - velocity dip.
4. 98.0grn-2861
5. 99.0grn-2899 - hard bolt lift

I shot these 5 rounds at 300yds and the resulting group was 2".
Xdeano
Rate now:
BobLSwagger

XFirst Sergeant
Rating: 3.6/5 this site
1419 posts this site
Re: 338 Norma Loads
03/17/2015

---

How did you manage to fit that much powder in the case with that longgggg 300gr Berger?

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/17/2015 Last edited 03/17/2015 by xdeano

---

It'll fit...

I know it seems like a lot, but the density of the RL33 is higher then say H1000 where you'd have a hell of a time with 90grns.

xdeano
Rate now:
BobLSwagger

XFirst Sergeant
Rating: 3.6/5 this site
1419 posts this site
Re: 338 Norma Loads
03/17/2015

---

Looks like I'm going to have to give the reloader 33 a shot in my .338 Warthog... (.338 NMAI). I'm currently running 93gr of Retumbo with Berger 300gr OTM's @ 2893fps out of a 28" Bartlein 1:9.3

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/18/2015

---

Definitely worth the try. You'll see how dense the 33 is.

xdeano
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/18/2015

---

I've got some data for you on the US869.
90.0 - 101.3grns US869
300grn bullet
@100.0grns = 2710fps

Now this is not my data so start low and work up. Same as usual.

xdeano
Rate now:
Eric608XPrivate
Rating: 0.0/5 this site
5 posts this site
Re: 338 Norma Loads
03/19/2015

---

Has anyone tried the Lapua 300 grain bullets?
Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
03/20/2015

---

Whats the question? They will work just fine.
Xdeano

---------------------------------------------
--- Eric608 wrote:

Has anyone tried the Lapua 300 grain bullets?

---------------------------------------------
Rate now:
BonczykXCorporal
Rating: 0.0/5 this site
50 posts this site
Re: 338 Norma Loads
03/24/2015

---

My 28" Lilja 1-10 got:



2825 with 90,6 grains Norma 217 behind a 300 Berger Hybrid. COL: 3.6393.

2694 with 88,0 grains Norma MRP2 behind a 300 Berger Hybrid. COL: 3.6393.

Rate now:
garandmanXFirst Sergeant
Rating: 3.0/5 this site
1499 posts this site
Re: 338 Norma Loads
04/23/2015 Last edited 04/23/2015 by garandman

---

89.0 gr of H-1000 with 300gr Berger OTM

3.602 Cartridge Length ... I'm a couple thousandths off the lands.

Averaging close to 2800 fps from 27" bbl.

5-shot groups were 1.125 @ 200 yards.

I managed one 3-shot group at 200y for 0.625" NOT sure I could reproduce it.



I'd strongly recommend Berger boolits across the board. My 6.5 CM loves them too. Super high ballistic coefficient on both calibers.



My Retumbo tests for 338NM were averaging 2715 fps.

Rate now:
gewehrXGunny Sergeant
Rating: 3.0/5 this site
828 posts this site
Re: 338 Norma Loads
06/28/2015

---

26" bartlein 10 twist,

300 berger, 3.656" oal, 85.0 grains IMR 7977, 2710 fps

Rate now:
NormaMagXPrivate
Rating: 0.0/5 this site
36 posts this site
Re: 338 Norma Loads
07/26/2015 Last edited 07/26/2015 by NormaMag

---

xdeano

Close to 2900 fps from a 338 Norma out of a 26" barrel?

How is brass life?

I`m building a 338 Norma with a 30" Pacnor 1-9 twist barrel and hoping for 2850 fps with good brass life.

Rate now:
xdeanoXFirst Sergeant
Rating: 3.1/5 this site
1038 posts this site
Re: 338 Norma Loads
08/03/2015

---

brass life seems to be good. I'm not running a lot of the rl33. my main load is h1000 which i have previously listed on this page. but with RL33 a guy can get up there in velocity. Just giving the guys some insight. My numbers will vary from others.



xdeano

Rate now:
TheflyingpoleXCorporal
Rating: 3.1/5 this site
60 posts this site
Re: 338 Norma Loads
01/28/2016

---

Just saw this. Thanks. Life got in the way and I haven't messed with this in ages. Hopefully this weekend.

> xdeano wrote:
> > Theflyingpole wrote:> > Any one try US869. 1smalljohnson told me to give it a try. I've just started messing with it. The highest I went was 99 grains and if I remember correctly I was in the mid 2700s. This was with a Berger 300 out of a 26" barrel. I'll post more after this weekend hopefully.> I've got some data for you on the US869. Rate now:
SPAK7XFirst Sergeant
Rating: 3.4/5 this site
1777 posts this site
Re: 338 Norma Loads
06/19/2016 Last edited 06/19/2016 by SPAK7

---

Bartlein 30" 9:5 twist suppressed
89.0gr H1000 fed 215 Berger 300 otm coal 3.675"
2825fps sd 9
Barrel only has 72 rounds on it. Might see some increase in speed with some more rounds down the tube. We'll see.

Rate now:
Thrust911

XFirst Sergeant
Rating: 3.4/5 this site
2180 posts this site
Re: 338 Norma Loads
07/05/2016 Last edited 07/05/2016 by Thrust911

---

Area 419 built Deviant action in AI AX CIP length chassis.
Hawk Hill, 9.3 Twist, 27" tube.

215 Primer
88gr H1000 - zero pressure signs.

300gr Hybrid -- 2773 FPS avg SD 3
285gr Amax -- 2789 FPS avg SD 11.5

Rate now:
Thrust911

XFirst Sergeant
Rating: 3.4/5 this site
2180 posts this site
Re: 338 Norma Loads
08/16/2016

---

Settled on 89gr of H1000 pushing a 300gr Berger. Shot it on a ridiculously hot day...occasional ejector swipe, primers look good, no sticky bolt. At 1071 yards it hits steel with authority.

15k off the lands
AVG 2809FPS, SD of 4.3, ES of 9

Also will note that for my barrel the POI is the same for both 88gr and 89gr of H1000.

Rate now:
inferno218XSergeant
Rating: 3.1/5 this site
334 posts this site
Re: 338 Norma Loads
09/25/2016

---

Has anyone tried any 256 Flatlines yet?

Rate now:
SPAK7XFirst Sergeant
Rating: 3.4/5 this site
1777 posts this site
Re: 338 Norma Loads
09/25/2016

---

Not yet but it's definitely on the to do list...the 255 flatliners definitely have my attention for the Norma.

Rate now:
inferno218XSergeant
Rating: 3.1/5 this site
334 posts this site
Re: 338 Norma Loads
10/08/2016

---

I started working on my Warner 256 the other day and i think i am close to a load. I will have a chrono out next week and will post up numbers with load info.

Rest in peace, tough guy. Condolences to his family and friends.

Quentin Tarantino's favorite character actor Michael Madsen is dead from cardiac arrest at the age of 67. In heaven or hell, he'll be partying with his buddy Tom Sizemore.

New AXL Equinox cummerbund pair. Lrg/XL Multicam

-New AXL Cummerbund Retrofit kit

-New SPC tubes adapters pair multicam

$160 shipped.

PayPal FF Venmo