Lapua 338 lapua magnum ammo

290 rounds of lapua 250gr lock base lot #4318033 -$sold

60 rounds of lapua 250gr open tip match scenar lot #4318017 -$420 shipped

60 rounds of federal premium GMM 300gr matchking BTHP -$350 shipped

Hey all,

Loading for a factory REM 700

Using Hornady modified case and OAL tool. Using the tool to find my jam point and I am getting a number of 2.802. This is holding the case firm into the chamber via the rod the case mounts on and sliding the bullet until contact, tighten set screw and remove case. Bullet sticks in barrel but a small tap on the side of the stock below action frees bullet.

Using this 2.802 measurement I have my seating die set for a .020 jump and I have my finished cases sit a CBTO of 2.782

This is giving me a OAL of completed rounds that are 3.444. This is nearly .105 longer than the max OAL according to the books. Has anyone ever had something this extreme?? I have shot rounds at this measurement and have chambered and extracted them without sticking a bullet.

This got me thinking as it seems extremely long. The other day with the bolt stripped for the gun and checking the fit of some brass I tried the 30-06 modified case for shits and gigs. The bolt wouldn’t close on the modified case without some good effort. I then compared the modified case to a factory Barnes load and to my sized cases.

The distance form the base to in which the shoulder starts at the top of the body on the modified case seems quite a bit further forward (longer) than on either the factory loaded Barnes or my sized brass. Both the Barnes and the modified case measured 2.044 case base to datum using the Hornady comparator. The Barnes case would however allow my bolt to function relatively free while stripped.

If the shoulder junction on the modified case is keeping it from going as far into my chamber wouldn’t this give me a longer CBTO as the bullet then has more distance to be moved until jam point while using the OAL tool. I was thinking I had a .020 jump but now I’m wondering if I am a lot closer to or even potentially jamming.

Attached are a couple photos. One is a dummy round, loaded Barnes factory load and the modified case. Others are datum measurement of the modified case and Barnes load, OAL and CBTO on the dummy round.

Thanks Alan

Aero 10.5” 223wylde barrel, low round count - $OLD
Daniel Defense Iron Sights - $100
Aero .750 pin or screw gas block (new) - $OLD
.750 gas blocks, used (2 available, not pictured) - $OLD
Aero Ar10 standard charging handle, new - $18
Standard charging handle, A2 flash hide, picatinny qd sling attachments - $12ea
Geissele 2 stage triggers, high round count (w/ nsn and cage code)- $OLD
Aero milspec trigger, new - $OLD
Midwest industries loop end plate sling adaptor - $18
Aero A2 grip and buttstock - $25
Crosshair hydrolic buffer and spring - $75
Magpul bad levers, ones screw is getting stripped - $OLD
Commercial spec buffer tube - $20

Pyser Small Arms Collimator for M110 and M2010. Works with AR10s and 30 cal rifles. Great for bore sighting and confirming your zero without firing. Excellent condition.
$550tyd

DROP TO $450

Selling my GA Tempest action with a 26”bartlein 1 7.5 twist straight taper 6 dasher barrel chambered by GA
Barrel has just under 150 rounds
Will also include the tempest action wrench to remove barrels. GA sells pre fits for this action

Price shipped to your ffl
$1500 BARRELED ACTION with action wrench

Also have a 6 creedmoor barrel just under 200 rounds if buyers interested

Springer X-Five Legion plate for Romeo3 Max $35

Don't have much time for LR anymore so selling my rig. Around 1000 rounds through it, good shape but it is used

BARRELED ACTION
22" Proof 6.5CM Prefit
Rugged Suppressor Brake
Tikka T3X Action, Bolt, and 2 Stage Trigger
Murphy Precision Scope Base
Area419 Dragon Scale Bolt Knob w/ Swept Handle
Mountain Tac T3X Billet Bolt Shroud
$1400 shipped

CHASSIS
Spuhr SICS 16" Chassis Cerakoted in H235 (Coyote)
Spuhr ARCA Slider w/ Pic Section
Spuhr Adjustable Bag Rider
5ea MDT Steel 308/6.5 Mags
$1200 shipped

Not interested in trades

Bore guide was used once & the o-ring ripped off when I pulled it out, you’ll need to grab a pack of them at your local hardware store. Cleaning rod & jag have never been used.

$100 shipped
Zelle or payment

Used once, I prefer the TBAC CB brakes personally.

$80 shipped
Zelle for payment

First start off by saying I have a B14R factory rifle in a MPA comp chassis

It has shot decent. Not super but good enough

I shot it a bunch last year and somewhere along the way left my suppressor on and based on my cleaning and borescope exam I have pitting in my barrel

Not a huge deal but I'm really hoping to stretch its legs this year in long range rimfire and torn on what I should do

I know guys here have owned many rimfires.

Would an upgraded B14R with the bolt smoothed out and custom modacam barrel be worth it. Or should a guy invest in a Vudoo or Rimx instead

I’m looking for accuracy. I don’t compete but if I did it be in a open class much like fclass as that’s what our local club does

Looking for opinions on which way to venture

Before someone says shoot it and see what it does. I plan to shoot it. I’m looking for the next step regardless.

Lightly used: 150ish rounds on this TT 2 stage ar15 diamond pro curve trigger. No trades please.

$195 to your door.

For sale is an excellent condition Type 2 RMR (black).

Has the original box and papers
Will include a sealing plate

Asking $425 shipped OBO

Bighorn Origin Prefit
6.5 PRC Proof Research Carbon Barrel 22”
100 Rounds through the Barrel

100 Pieces of Lapua 6.5 PRC - 1 Time Fired Brass
199 - Berger 156 EOL Bullets

Bighorn Origin Magnum Bolt Face

$1,100 for everything (Forgot to Include the Bolt Face in the Photo)

For sale is an excellent condition Type 2 RMR (FDE).

Has the original box and papers
Will include a sealing plate

Asking $425 shipped OBO

115 Pieces Lapua 300 PRC 1x Fired $115 + $15 Shipped to your door​

Tan, waxed canvas, Lite fill. New. 105 shipped.

FS: Manners PRS-TCS in ALTUS Badlands.
M5 Mini Chassis
Full Weight Kit
R700 Right Hand Inlet
1300
Will meet if local to San Antonio Area.

Looking at WMLRF w/ ballistics. I’ve done a little research but wanted some real reviews before I bite the bullet. I’ve see vortex impact 4000 is reasonably priced. I’ve also been eyeing the Mars-Mc for a little bit more. Any real reviews on pros and cons either or maybe an another option? Thanks

I've been shooting my Q The Fix 6.5cr at 1 mile and 1900 yards recently. The only scope base available from Q is 0moa so I'm using a 15 moa mount for my 34mm scope. With only 59moa up on my scope, I've got to hold between 12-16 moa in the reticle which works and I can get hits 30%-50% of the time. I'd love to find a 34mm scope mount with 30moa cant to reduce my holdover. I cannot find much besides a Spuhr that is $400+. Am I missing something?

I have a Trjicon Reap-IR 35-3 that has less than an hour on the sensor.

Open to higher end trades. 4-20 or 4-16 scope plus cash would be great.

Sale price would be $5k

2 mags, new in package.


$45 shipped.

Well well well comrades. MAGA and DOGE is really the cultural revolution.

THis is why history and that learnin is so important! Destroying Government is the same as Forced Nationalization of all Industry!

I know I taunt everyone for not reading and being in the echo chamber around here, but as a full Dunning Krueger expert this is in fact the EXACT OPPOSITE of what almost all former chicom/N Korea people say. In fact it was all this DEI shit that was straight up cultural revolution/Red Guard. and that little performance the other night but the Democrats and their bowing to BLM/DEI/Trannies and forcing all of us to kowtow to their beliefs that every dissident I've read has said reminds them of Mao's Cultural Revolution.

I even put a post about it in the secret squirrel section a few years ago. Man I really hate these people lately.

Sorry I just really hate communists (I'm old)
Not sorry.

Taipai is the capital of One China.

McMillan bedded and painted by TS customs for impact 737r action. Full length arca.
QD cups on the front and rear for sling mounting. DBM bottom metal.

Will also sell the Proof research barrel if interested. .308 1:10 twist 26" 80 rounds Comp contour. PM if Interested.

Also have Hawkins hunter DBM and flush mag for sale if interested.

1000 shipped to lower 48.

This might be a niche topic, but any Remington RACS chassis owners that have a RRS BRACS ARCA plate? I placed a custom order to have a run of the BRACS plates made, and they do not fit properly on my short action RACS with a full length fore end tube, nor with a spare XM2010 fore end I also have (both fore ends are the same).

It looks like the curve of the mounting screw points on the RRS BRACS is sharper than the curve on the full length fore end tube. Sliding the BRACS all the way back pushes it down a bit, causing the mounting screw holes to go out of alignment. So I can only push the BRACS so far back before the screws start binding due to the misalignment. Please see the below pics for what is happening.

DT A1 bolt… Bought used as part of a full 6.5CM conversion kit - 30 rnds fired by me in my A2 / Functioned 100%

What you see is what you get. Let me know if you have questions or would like additional pics

-260 245 $225 SHIPPED / L48

Thx for looking

Possible trades +/- cash
- ? (Don’t be afraid to throw something out / Don’t be offended if I pass)