6.5 Creedmoor Redding Type S Match Bushing Full Die Set $120 with 290 bushing​

Have two sets of the 6.5 available

REDDING 243 WINCHESTER TYPE S FULL BUSHING DIE $sold​

REDDING 204 Ruger TYPE S match DIE set $90​

I've got 2lbs of rl 17 one is unopened the other is opened but only a little missing. Pictures won't load but can send pics on scale. One is 1lb 2.6oz the other is 1lb 1.8oz

$90 will not ship

I guess this is a general question, but it involves a rimfire, so here I am.

I got myself a new T1x, and I am testing types of ammunition at short range. I am zeroing at 35 yards, and I will be moving out to 50 yards once I have favorites. The final goal is to kill squirrels.

I shot several types of ammo the other day at 35, and while an Eley product came in with the smallest groups (0.468"), cheap CCI Blazers shot prettier groups (0.555"). Each group was one nice round hole. The Eley groups were irregular.

Should a shooter conclude anything from the fact that one brand of ammunition shoots nice, round, symmetrical groups?

I was pretty surprised by the Blazers. I also shot CCI Sub-Sonics, and I got a nasty flyer I'm pretty sure I didn't cause.

Area 419 Headapace and Ogive Kit

Most precise and consistent way to measure

Comes with Stand

Brand new, hasn’t been used (was a gift to me) , just opened to take photos

I already own Hornady and SAC kits

SOLD shipped

(This is not a sales thread, I'm asking for info) I'm parting with a long and short action chassis and after looking online, I can't find a price to advertise them in here for. One has been sitting in it's box for a year (LA), and the other (SA) has been babied and well cared for.

Any ideas?

IRay Rico Hybrid 75 HYH75W

Purchased 02/24
4+ years of warranty left
LR1000 Range Finder included
Extra battery included

Comes with everything pictured. Free to video chat with anybody as needed. References available.

Wire transfer or PayPal F&F preferred

$6,900 OBO

Selling my ACC Premier Gen 1 chassis. It’s the sky blue cerakote version. Right Hand Remington 700 short action.

It’s been used for a couple seasons, so not perfect cosmetically. Some normal scuffs and wear and tear in the mag well, arca rail, and bag rider/butt stock. No issues that would cause any issues functionally though.

Chassis comes with grip, buttstock, like green dampeners, bag rider, 1 set of non-QD MDT external weights, and mirage shield.

Internal weights not included.

Asking $900 shipped PayPal F&F. If G&S buyer covers the fee.

The MDT XRS forend has these holes in the side, underneath the plastic mlok slots. They are different from the 3 threaded holes for mounting the side panels. What are they for!? There are holes in the bottom of forend that look like they line up with the forend weight, but I can't find any accessories that seem to use these holes.



I have an MDT XRS and just went from the original forend to an enclosed forend to get the arca rail, and these holes are on both forends.

I also added the wood kit that I've had kicking around for a while, and I like the look. However, I lost my side mlok on the forend that I was using for a sling cup. I am thinking about enlarging one of these and threading it for a threaded flush cup (I would also drill through the wood side panels). I just don't want to unknowingly mess up a mounting point for an accessory I might want in the future.

Who works on Howa mini-action?
I just need someone decent with the appropriate tolling for a simple project.

I need Scalarworks Leap17 for delta point pro .
Let me know if u have 1 laying around.

Impact 737R SA - 150 rnds

TT Diamond Single Stage Flat Shoe

Benchmark 6gt 26” 7.5 twist by TS Customs - 150 rnds. Black cerakote

Benchmark 6gt 26” 7.5 twist by TS Customs - NIB. Black cerakote.

$3000 action / trigger / barrels
$2800 action barrels

*polished hawk hill barrel in pick unavailable.

Maybe she only speaks jive.

Cumswalla Harris would have at least blamed it on Trump.

Login to view embedded media

SOLD!

Brand new GA Precision Templar V2 chambered in 6.5 GAP 4S otherwise known as 6.5 RSAUM.

Defiance Action branded as GA Precision Templar V2. Manners stock is an MCS-T. One of my favorite manners stocks. It has a trigger tech trigger and unknown bottom metal. Barrel is a Bartlein 3B contour with a seamless radial port muzzle brake. Barrel is 24". I do not have a mag to include with it.

34mm / 1.260 height / 0
$325 shipped f&f or add fee
no box.
Perfect condition

$115 each set of 2
or
$215 for both sets (4).
F&f or add fees.

What's your favorite trigger for these and do they offer anything in a 2 stage?

Making room for rifles that don't get shot
This is a hard to find Obsidian action. Barrel is a QPQ (not cerakote) 22" 6.5CM barrel. Both have seen 0 rounds.
Chassis is an anodized gold Solus comp 17" chassis. Has a TLC Precision grip and a 3d printed barrel shroud i bought off here. Chassis has been used at the range but no major defects. Fun marks here and there. No trigger included.
Price is $1750


To keep with the gaudy gold theme, I can include a TT Diamond for an additional $250 when sold with the rifle.

Have some left over scope mounts that I'm not using. All are used.
JP 30mm. 0 MOA.
$150


Vortex/Seekins 34mm. 20 MOA.
$150




Accuracy International 34mm. 45 MOA.

AI Picatinny Scope Mount 5656

Accuracy International 34mm Picatinny Scope Mount p/n 5656 - Call (570) 368-3920.

www.eurooptic.com

$150

- BCM upper receiver
- 10.3” Daniel Defense 1-7 twist 5.56 barrel
- Daniel Defense bolt carrier group
- Daniel Defense MFR XL 13.5” handguard
- Geissele bombproof gas block & tube
- Strike industries extended latch charging handle.

-Spikes tactical lower
-Alg trigger
-SB tactical brace
-Hogue grip

brand new (unfired)
I have over $1000 in the upper alone.

Suppressor not included

I have over $1000 in the upper alone.

$925 shipped to your ffl

Viper 12x50 HD binoculars. Used for about one season of PRS / Accurized AR spotting. Have since diversified to both larger glass (18x56 UHDs) and smaller glass (Kilo6K 10x32s) and these 12s need a new home. Great condition. $400.

Want to trade my Factory Radian Mod 1 9” 300 blkout with geissele trigger in factory urban camo. The main trades I’m interested in are as follows: Scar 16 NRCH in FDE, Staccato XC (like new in factory condition, can have rmr), nighthawk sandhawk with comp (or similar nighthawk 2011 with comp), potentially would consider other high end 2011 between xc and sandhawk quality, would entertain other high end rare trades. I know all the trades listed will require cash from me and I am prepared for that. Let me know what you have! $2800

Looking a clean post 64 original Winchester m70 trigger guard for a m40a1 build. I have the floor plate already just need the guard.

Not sure what these go for by themselves so I’ll put $55 out there and if I’m low someone please educate me.


Also looking for MRT late 80s-early 90s dated sling and other odds and ends for the m40a1..

Folks

I recently purchased a M40 walnut stock on Ebay from a vendor "Beever156". Inletting is a nice tight fit to my rifle, surface finish is extremely smooth. He has a pair for sale at $400 right now.
No personal interest in the sale. Just thought it might help someone out building a M40ish clone.

Best regards,
Arthur

Legit new and unfired (except test fire at WAR) 308 JAE Premier Reticles build. Absolutely flawless! Built by WAR Rifles in Manassas.

Build list includes:
Stiller TAC30 action
Proof carbon barrel
Piercision Muscle Brake
TT Diamond
Atlas bipod with AREA 419 ARCA
JAE chassis with Full ARCA rail
Premier Reticles Heritage Gen 2 XR
SPUHR SP-4601
Premier is under Tangent warranty as well

Over $8500 in build. $7000 OBO and will accept partial trades for high end 2011's. Also have 30 boxes of Hornady ammo available to purchase.

Located in Northern Virginia for show. Will accept any respectable means of payment, and rifle will have to ship to your FFL. Not looking to split unless you want the rifle only. Do have all accessories with chassis as well.

I'd like to know about the three differences I see between factory match and our handloads.
1. Why do we have to chamfer necks but some of the best factory ammo out there does not? How do they get away with it?
2. Why does factory ammo have a ton of neck tension, but we're all kinda pressured to do 2 thou of tension? I hear from a few people that they run 4 thou and have noticed better groups; should we all be running at least that much then? When I try to pull bullets out of factory rounds to experiment, it's always really hard. When I pull mine, sometimes they're really easy.
3. I heard that a ton of neck tension increases pressure; does it? And by how much? Asking that because I pulled down some old 8mm Mauser ammo from Yugoslavia, and it was soo difficult I had to break the seal (due to the asphalt looking stuff) with a seater first, before any of the bullets would pull. Are those rounds experiencing a massive pressure spike because of that?