I have a like new zero comp 527 with an mpct2 and 15mil locking elevation with the MK ring spacer. Asking $3,450 shipped
Pm with questions.

Terminator TF Muzzle Brake For Sale
Intended for .338 Lapua Magnum (maximum)
$135.00 Shipped to ConUS
Zelle or PP/FF

Can you guess what kind of dogs they were?

Shh, audiance...
Here's a clue, a picture of the owner.

‘Tragedy beyond comprehension’: Boy, 8, dies after dog attack near DeLand, sheriff says

The Volusia Sheriff’s Office said an 8-year-old boy was killed by a pair of dogs north of DeLand.

www.wftv.com

SOLD

Schmidt & Bender 3-20x50 pmii lp2.be p4fl2-moa, original box, cleaning kit, manual, receipts and all. Comes with original tenabraex flip up caps. Glass is super clean, body has a couple knicks as you can see in pictures. Everything else is flawless. Can provide any other pics upon request.

Priced to move, asking $1900. If my price is off feel free to offer. Scope will come with all original equipment plus some 34mm Seekins low rings, and a vortex bubble level if interested. Payment through PayPal f&f, or cash for meetups local to WA. Can ship out today expedited shipping on me.

All of that being said, I’m open to trade for a Nightforce ATACR 7-35x56 MIL-XT or other MRAD offerings, or a Gen III Vortex Razor 6-36 MRAD. Can add cash on my end if price is off.

*Was just made aware there is somebody impersonating me trying to collect payment from people commenting here. Please be vigilant and report that account please*

*SOLD*

For sale is a Remington 700 Short Action RH Factory stock from HS precision with integral mini chassis. This is an approximate year 2000 date of manufacture.

Sold

Thanks to all!

Microtech amphibian. Aluminum fluted scales black on black. Carried a couple times i dont think ever cut anything looks brand new. It is a grenade. $old shipped ppff venmo. Will trade for/towards winkler, HFB, etc...

I have a like new vortex venom for sale. 5-25 mil EBR7C reticle. It’s in a Set of cheap rings. Asking $350 shipped I also have a larue PSR20 QD mount if the buyer would rather have that I would sell it with that for an extra $200. It does have some slight ring marks I tried to get in the picture other than that it’s in like new shape. Thanks

Looking for the original RRS BAI-AT Arca plate, which is the short one and has finger grooves. It only fits the Accuracy International AT (AIAT). Here is a representation of what I’m looking for.



Lots of pics here: https://www.ocabj.net/really-right-stuff-accuracy-international-at-chassis-plate-review/ (it’s where I got most of these pics and I hope he doesn’t mind).

Horus 2000hovr rangefinder with Bluetooth and built in tripod adaptor new in box. $145 shipped and insured

Very lightly used FoxPro Hammerjack two and carry case.

$200 150 shipped conus. In the interest of economy I may break down the cardboard box for shipment unless seller objects.

I can take zelle, paypal f&f, or check.

Not interested in trades. Cross-posted so first time-stamped "I'll take it" wins.

This mag is brand new. I got it in, opened it, and realized it was the medium one (not for SA). $60 shipped or trade for an AICS 308 mag or wsm mag

Purchased this optic in October 2023 so just under 4 years left on the warranty.

Works exactly as it should. I bought this one as a backup/ optic for my sons. Didn’t get used enough to justify the cost.

$6900 obo you pay any shipping/insurance

Like new GAP-10 .308. Has the Hogan receivers that lock up nice and tight. I bought it used, so actual round count is unknown, but based on the wear on the bolt and carrier, it doesn’t have more than a few rounds down the barrel. Adjustable gas block. Will come with the Surefire suppressor mount/brake. Spuhr and S&B are available for $2700 more. Bipod and suppressor not included.

Trades considered….
Foundation or Manners stocks for Impact 737/rem 700 actions
Impact 737 AW cut
SB PMII scopes
Thermal scope or clip on
AMP annealer
Autotrickler
Bix and Andy trigger
Anschutz model 54 or Match/Super Match 22LR

New in the box with transferable unconditional lifetime warranty Vortex Diamondback Hd 8x32 binos and also included new no box just carry case vortex crossfire 1400 rangefinder

Bought for son he hasn’t used

$350 to door

I have the Sartorius Entris 64-1S scale with The Ingenuity Trickler system. It works great. However, recently I started noticing my scale takes several minutes to stabilize once I turn it on. And then after using it and verifying after have loaded some cases it has changed again. Small amounts of drift such as 0.026 to 0.050 or so. About a kernel or so of weight drift. It's not much but up to now it has taken very little time to stabilize and then rarely moved after was tared. I don't have anything like a line conditioner or antistatic mat etc. Just plug in and go.
Any ideas what is happening? Do I need to change my setup such as line conditioner, surge protector etc? It is always been in a separate room in my house with climate control. I have changed nothing. Never did anything to scale either. Thanks for the help!

My new brass has .312 necks. I typically size to .314. Loaded round is .317

Would loading right into the new cases without resizing the necks be a terrible idea? 5 thou seems like a lot.

Looking to buy a barreled action. Origin,cash or similar with available profits. I’m also interested in just an action . Preferred caliber would be 6gt 6dasher or 6creed let me know what you got

For sale is my safe queen NF ATACR 7-35 SFP with MOAR-T reticle. I have maybe fired 75 rounds of 6.5 CM with this scope. Has the faintest ring marks if looking for them but otherwise not a mark on it. Comes with everything as new except for the original box. Will come in a different NF box.

$2500 shipped OBO

YerrowSniper Estate In google sheet

Hello everyone I am Yerrowsniper brother. I am responsible for his gun estate. I wanted to reach out to this community, as i believe a lot of you might be interested in some of his items We hope that someone will appreciate his items as much as we do.

1) How can I get a price? Please go to the web sheet and email me back the tab, row, and quantity. I will therefore be able to give you a price and we can meet in metro Atlanta
2) What's your contact?: [email protected]
3) Using a phone that's too small? email me and I'll send you a list
4) Green is sold, red is on hold, and yellow has been considered but not finalized.
5) There are a total of 7 tabs.
5)NFA items. we wanted to do this later our lawyers said they would get back to us
7) I know that a Vortex HD Gen 2 will not fetch $3000 but because I am a one-man show, I needed a way to streamline this process. In general, people have been telling me what they are interested in; I put it into a tab on "sold/ongoing" and discounted it from there.
8) Primers and powder. I would like to deal with this locally for now. We live in Georgia.
9) YerrowSniper Estate In google sheet
10) detailed pictured on each row. more upon request

Thank you for looking at my brother's PRC items.

Lee 24 cal bullet feeder die.
Has anyone bought and tried this bullet feeder die? I am looking to us this on a Dillon 750. I’ve tried the Mr. Bullet feeder with very little success. The issues with the Mr bullet, is that it doesn’t handle the 6mm worth a darn. So I found one that is designed for a 6mm and I’m looking for info before I buy. Secondly if you do have one. Are you using it with the turret tube system that comes with it or are you using an electric rotary bullet feeder to the die?

Looking to trade my basically new TT trigger.

What I have:
TT diamond single stage curved

What I WANT:
TT diamond ar15 two stage curved

New Foundation Samson with centurion grip in Black inlet for Impact and Hawkins bottom metal which is included with brass weights. Sold shipped

I just got my hands on a pair of new Ruger Bisley Blackhawk convertibles 5.5" barrels in both 45 Colt/45 ACP and 357/9mm. The Berrys .452 plated hybrid hollow points ran great in the 45 ACP cylinder and I was just wondering if I use the oversize for caliber and brass .357 plated in 9mm cases it would also increase accuracy with the larger bore diameter, instead of like jacketed .355 normal pills. I am looking at the Berrys 148 gr plated hollow base wadcutter in .357. for 9mm cylinder. Also any load suggestions or advise for that, or these combo of revolvers if you're familiar with it. I'm just getting ramped up for revolver loading. Thanks!