If anyone has seen my varmint posts here over the last few years you’ll know that most of my varmint kills last 2-3 years has been with a .17 hmr . 17 grain Vam CCI fps on box is 2550.
have a case -500 rounds bought pre Covid lot number ending in 049.
The rifle is a a budget Savage 93R17. A budget rifle but accurate and dependable and I don’t cry when it gets bounced on a tractor or in a truck bed .

Anyhow over years I’ve have at various times chrono’d this load - 2550 is box muzzle velocity- I’ve routinely got fps as high as 2730- almost always above 2550, almost always above 2650. A 100 fps gain is a good thing - and some rifles I’ve heard can be slightly faster than others whatever .
The problem arises in the lows 2410 is the lowest I’ve actually chronographed in this lot .
This accounts for - 3-4 stellar accurate shots and then a fifth shot can be a complete miss .
I know CCI loads nearly very one’s flavor of .17 or at least their own , federalist and Hornady and Remingtons .
Winchester/Browning iOS made by Winchester according to some .
PMC and Sellier and Bellot also load .17 but I have never seen any .
Anyone run a flavor of .17 that doesn’t have a possible 300 something fps variation possible in a single box ?
Or is this just the nature of rimfire?

I received confirmation that if we commit to 10 left-hand actions Vudoo will make a run of them for us, I have a commitment for 2 so if interested please add your name to the list. THEY WILL NOT BE AVAILABLE AS ACTIONS ONLY,

1. DI Precision
2. DI Precision
3.
4.
5.
6.
7.
8.
9.
10.

Walther PDP 4” with Walther Dynamic trigger
Trijicon RMR RM06
2 mags
Low round count and great shooter.

Trade for Tikka T1x 22lr, Tikka T1x chassis, PDP Acro version, will consider other trades as well.

$900 shipped

First one of the year - inside 20 yards on the a wood pile I didn't get around to cutting . 17hmr

Shot another one as well down by the creek- it got back in its hole but left lots of blood and hair behind .

Saw a third - a huge one but was slightly uphill from me and cows behind it so I cut east to get around it and when I came up the other side it was gone .

Damn I miss this all winter long

Brand new, never used.

$35 shipped ALL SOLD
.290 (6.5 CM) SOLD

Would trade for 1 for 1 for a .287 neck/shoulder bushing in good shape.

WTS Leica 10x42 HDB-3000s in excellent shape. Upgraded to the Geovid Pro's w/ AB Elite so these need to find a new home. RF is awesome and faster even than in my Pros. Will come with a neck strap. I don't think I have the box or anything else…but if I can find it I'll include it.

$1350/shipped.

Thanks,

Chase

Lookin for one of the ARMS #23 QD a2 grips. (pictured below)
I had one but my friend took it, and now I need another to replace it

Feel free to post or send me a message.
Thanks guys

Lightly used Geissele Premium MIL-SPEC Buffer Tube - DDC

Asking $50 shipped

Taken off Spear LT. Shot very little, looks nearly brand new.

SOLD $160 shipped

All new in bags.

TR2 Brass weight - $55 shipped
Tube weights - $75 shipped

$120 shipped for both.

Chassis has been used and it shows but it still works and functions just like it should. Comes with internal weights. Asking $700 shipped pp ff,venmo,zelle.

Selling my unused Origin action. 308 bolt face. PENDING will mark sold when payment is received.

I’m looking to sell or trade some 7mm REM mag brass.
This is once fired brass. I was testing factory loads in a hunting rifle. So the head stamps very from Hornady, Norma, Winchester, HSM and Federal. Most places have brass listed over 1.56 per case. Make an order or trade!
There’s 485 Brass cases and 126 plated brass cases total of 611 cases. All once fired brass.
Sale price shipped to your door. $600
Trades: (I can add cash for the right deal)

Bix n Andy trigger
MDT chassis
Binos 15x56

24” .308 1-10t threaded 5/8x24 blank. Like a sendero contour. $350 shipped

Sig Sauer TANGO MSR 1-6X24 – 30mm – SFP - Illuminated BDC 6 - Black reduced to only $259.99, While Supply Lasts

High Performance 6x optical system with low dispersion glass
Integrated thread in throw leaver for quick magnification changes
Illuminated MSR BDC-6 reticle with 11x brightness levels
Lay flat flip-back lens covers included
Dependable waterproof, shockproof, and fog-proof performance
Includes ALPHA-MSR 1 piece aluminum cantilever mount

Sig Sauer’s Tango MSR Riflescope is a perfect addition to an AR-type platform, but works equally well on virtually any other modern sporting rifle. It utilizes a high performance 6x optical systems with low dispersion glass for a crystal clear sight picture and excellent light transmission. The Tango MSR also comes equipped with an illuminated MSR-BDC6 SFP reticle, which is composed of a precise, 1-MOA free floating center-dot in the middle of an illuminated 10.85 MOA semicircle. Directly below the center-dot and semicircle is a “Christmas Tree” of holdover points and hash marks, allowing you to effectively compensate for bullet drop and wind drift at extended ranges. Other features of the Tango MSR include an integrated throw lever to seamlessly transition between magnifications, and an Alpha-MSR cantilevered scope mount is included as well.

Scope Weight: 1.24 lbs (without mount), 1.60 lbs (with mount)
Scope Length: 11.25 inches
Magnification Range: 1x - 6x
Scope Objective Diameter: 24mm
Scope Tube Size / Mount: 30mm
Turret Adjustment (Click Value): 0.5 MOA
Elevation Turret : Capped 0.5 MOA per click
Windage Turret: Capped 0.5 MOA per click
Scope Turret Rotation: Counter Clockwise (CCW)
Reticle Position: Second focal plane
Reticle Details: MSR-BDC6 reticle
Eye Relief: 3.3 inches
Illuminated Reticle: Yes - 11 levels

Includes
Battery
Allen wrench
Manual
Lens cloth
Alpha-MSR cantilevered scope mount

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Used but looks flawless $50

SideBide is a side grip and barricade stop for the SideTrak™ system. The SideBite can be attached to the SideTrak weights to give you infinite positioning for a grip or barricade stop. With one on each side, they can act as stabilizers on top of a shooting support bag.
The SideBite's clamping screw and T nut are designed with a interference fit, and preassembled with a high strength thread locker. This joint is not intended to be taken apart.
Specifications:
SideBite and knob -
6061T6 Aluminum
Hard Anodized Type 3 Clear (grey finish)
T-Nut-
Material: 303 Stainless
Thread: 1/4-28
Screws-
Material: Alloy Steel Socket Head Screw
Size: 1/4-28 x 1.25
Finish: Black Oxide

Teslong Bore Scope. New. This is a must have. $85



Magneto Speed with arca adapter and clamp. $140

( just the adapter and clamp are worth $150 )



Mdt mag for 22-250 ( works also w 6 and 6.5 creed ) $60



Mdt mag for 300 prc and 7 prc. $70



Vortex eyepiece and 56 mm objective flip caps ( new ) $45 for set



Can facetime. Pay pal goods and services.

I am in the process of building a 7mm PRC with a Savage Tactical action. I have a Choate stock with a centerfeed blind magazine setup. I think I have found a magazine box and spring but not sure what follower I need. Will the magazine box and spring I am looking at work and what follower do I need?

Magazine Box, Long Action, New
Magazine Spring

Can you help Identify what Bipod this is? and what side picante rail this is on the AT Rifle. This is a current picture off the AI web site. Any help Appreciated. Also where can you buy?

use case: NRL22 (50-100yds)

scenario: with 26" barrel rifle balanced at front of mag well (pre-barricade stop). Gray Ops barricade stop made rig butt heavy; added competition side rails and 4 x Gray Ops XL steel weights to regain balance. would like to try 18-20" barrel but concerned with balance, welcome input/advice from folks running similar barrels.

build: RimX / MPA Matrix / Competition Side Rails ( 1.1 lbs) / 4 X Gray Ops XL side rail weights (2.8lbs / Gray Ops barricade stop / 26" ACE barrel ACE contour (1.250 -> 1.10 @ muzzle)) / NF ATACR 7x35

UPDATE: chassis is Matrix, not Pro. with added Comp Side Rails it has same/similar features as Pro without adjustable bag rider.

Traded a friend for this but I’ve never used it and getting rid of stuff that just sits. It appears he put tape in a few spots so please look at included pics.

Manners TCS 700SA Americana w/ Sikes Rail and Mini Chassis $1450

Also has the extra weight and spacers in the back that will ship with it in the box.

Nearly new steiner t6xi 3-30x56 with MSR2 reticle, awesome scope with amazing glass and nice reticle. I have tracked this thing out to 1500y and it's spot on, the turrets are very repeatable. The glass on these is premium and stacks up with my Element Theos and ATACR, very sharp with good pop, the glass is really above it's weight class. This one is super clean and without a scratch, no ring marks, glass and turrets are perfect. Nearest to new you will find. I'd love to keep it but can't justify doing so. Lifetime transferable warranty. Comes with Tenebrex covers and all the original goodies.

$XXXXshipped

No trades

Thanks for looking

premier heritage 5-25x56. Gen 2 mil dot reticle. Used but in great condition and everything works/tracks like it should. Also comes with Seekins rings and accuracy 1st bubble level.

- Zermatt arms origin short action
- PVA osprey custom barrel work 26” comp. Contour barrel chambered in 6.5 prc
- KRG Whiskey 3 chassis with arca spigot mount and angled heavy bag rider
- Triggertech Diamond flat face trigger
- Accutac BR-4 G2 bipod
- Arken ep5 gen 2 7-35x56 MOA in vortex precision match rings with throw lever and bubble level
- 120 rounds of hornady match 147gr
- 100 once fired hornady match brass
- Build only has 120 rounds through it and shoots sub half moa at 1000 yards consistently. Have all boxes and manuals from parts.
- 3800 $ or looking to trade for a manual car or 4wd manual truck. Can add boot for the right deal. Located in Knoxville TN call or text 8653185679

Looking for some advice and opinions of the best rail mounts for Harris BRM-S. I see that the LaRue seems to be very popular but it doesn’t look like it has the option of rotating for target following. Harris makes a rail mount that does rotate. I want the mount to rotate in conjunction with the BRM-S being able to swivel but would like to know what else is out there that others may be using.