(2) bags of 112 pieces of Hornady 6.5 PRC once fired brass. 1 bag = $112 shipped.

Brand new build. Load development completed by custom build company and load data goes with rifle. This is a Tuebor Precision Citadel Receiver, short action, stainless. The barrel is a Proof Research 26” chambered in 6 dasher 1-7.5 twist. Barreled action was professionally cerakoted. MPA Rem 700 SA comp chasis in midnight bronze. MPA 6.6 muzzle brake. Trigger tech Diamond flat trigger. No optics, rings, bipod or Impact included. Those are for sale separate. This entire gun was built by North Country Outfitters of West Branch MI. This was built for a backup PRS rifle. They worked up the load for me, but I didn’t shoot it. Now I’m onto other things I want more and selling this gun to fund another large build. My loss is your gain. Entire brand new rifle build with load data for $4000.00.

Let me know if you have one laying around.

I have a matrix pro with very little use. Has 2 alumni grey ops weights, factory mag block swept 3 grip. It's for a Rem 700 footprint and it's grey/gunmetal in color. It's a nice one. $1,075shipped

I have a mint condition, BNIB Benchmade Limited Edition 10th Anniversary Infidel for sale. I am the original owner. Comes as new direct from Benchmade with box numbered 4127 to coincide with blade number, 10th anniversary card, 10th anniversary coin, and pouch. This was a limited run with S30V black blade and silver aluminum handles. Smooth, snappy action and it has never been carried or cut with. Only taken out of the safe a couple times to work the action.

Asking $365 shipped

PayPal FF, Venmo or Zelle for payment

Either one of you degenerates drive by the house and kick me in the nuts repeatedly or help me find a 14mm x 1 RH thread protector for this abomination I have.

I figured this would wind up in the Pit, so I short cut the mods and it will be more entertaining for the masses

Ive always wanted to dable in some light Gunsmithing. Nothing to crazy just dropping barreled actions into different stocks or Chassis like MDT makes. Wanted to do this for a long time but was too nervous to take the plunge. I would also like to be able to change barrels out as well. Not to turn my own barrels but prefits that i could go from 308 to 6.5 etc... So, I'm having a bench put together from some leftover wood. I'm having it over built for strength my question is what vices or tools do I need to get started headed down this road. I've seen some Real Avit gun vices that look nice but I think that those would only help in dropping barreled actions into MDT stocks. So I know I would need a barrel vice and extra tools. Sorry that was alot but I've got many questions and just need some good guidance. I don't need the best tools just tools that will last and serve me well. Again mostly stock changes and barrel changes are what I'm looking to do. I have a tipton gun vice I use for cleaning but if there is a better one out there for that please let be know. I have the best gun vice but the Tipton ultimate is pretty damn tempting. Thanks for any and all help!!

I’ve got a preferred barrels prefit for a terminus Zeus QC action. 22” 1:9 twist 5R. About 800-900 rounds down it. Nothing wrong with it I just don’t ever shoot it. $450

Also have quite a bit of 308 ammo to go with it. Hornady black, federal GMM, fiocchi match with smk, etc. I’d assume around 350-500 rounds maybe? I can get a total if interested in all of it in a package deal.

So I've shot jaycee/4-h bb gun as a kid and hunted now for 40 years. 4-5 years ago i had my first custom hunting gun built which led to load development at 500 yd and then stretching it's legs to 1k just to say I did it. In the last 3 years ive attended an annual fun day at a ranch shooting to 1200 yds with some pretty good local hunters/600 yd competitors.
I've got swarovski z5s with customs 2 revolution Moa turrets on my hunting rigs and use an old gunwerks br2 for ranging and comeups. Last year I bought an x5 5-25 for an old custom bench 22-250 I've had since the 90s but have not done any reloading for it. Just shooting hornady 55 vmax and it shoots marbles at 100yd and have taken it out to 1k but beyond 800 it's falling off compared to my 6cm and 7mm blaser hunters.

Recently I bought a used kestrel 5700 elite link and garmin xero and have access to a shot marker and 1k range at neighbors place.

Today I got my butt whooped shooting in the wind (25-35 mph and targets 400-1200yards spaning 45 degrees direction of fire with quartering tailwinds). Z5s don't really dial much wind or have a reticle to hold much offset. My x5 does but slow twist 22-250 not the greatest bc.

Everyone there seems to only use the kestrel very simply and minimally and differently.

Any advice on what I need to learn about long range precision shooting outside of hunting? Where should I start? I feel like I'm jumping in somewhere in the middle but I missed some basic stuff or there is dozens of places to start but I'm not sure what really should be first, if that makes sense?

What reticle/scope should I get if I were to swap out a scope on say my 6cm for long range shoot days?

What's the best way to learn to utilize the kestrel more fully?

If I were to get a new barrel spun up for my old 22-250 in 6 dasher or something more modern for 600/1k type shoots and just leave my hunters as they are? On days 10mph or less they both more than capable of .5 moa to 1k and I'm very confident hunting big game to 6-800 yards in good conditions.

Whatever I do i want to be a better hunter first. At least at this point, "competition" is second and just for fun... but who knows

Thanks

22” Proof pre-fit carbon sendero contour barrel in 6CM 1:7.5 for Terminus Zeus quick change. Barrel has 40 rounds on it. $725 shipped

PayPal/Venmo/Cashapp

Hoping someone has heavier barrel for a mini before I spend way too much on a preferred prefit…

415ct Berger 6mm 109 hybrids lot PO2866 $225 shipped

Gone

Have a slightly used triarc 14.5 barrel. Was pin and welded and has less than 200 rd through it. 200 clams shipped. Pp f&f Zelle

I have a factory axsr barrel in 300 prc. Approx 250 rounds. Shoots great but had a custom barrel spun up so no longer need this. Comes with TBAC brake. 3/4x24 muzzle.

$700 shipped.

Price Drop
Sig Sauer P320 Slide 4.7” 9mm, No LCI, Black with sights, New, $115 shipped free to 50 states priority mail.

With white dot sights, not night sights, No internal parts included.

Payment method: Zelle, Postal Money Order, personal check.


.

$3500 shipped to your FFL
STI DVC Limited - 40 S&W
Stainless steel grip module with aggressive texturing
Infinity fire control group
TiN barrel finish
Adjustable rear target sight, fiber optic front sight
Pistol is in great condition with the exception of a surface scratch on the left side of the slide (pictured)
Includes 6 magazines, custom kydex holster and holster hanger, Midway USA pistol case and miscellaneous spare parts.
Let me know what questions you have. Thanks.

I have an excellent condition Protech SBR with black smooth aluminum handle and Stonewash S35VN blade. Never cut/carried, factory sharp and fires like a rocket. Like new in box other than a small imperfection on the handle coating. Not sure how it got there and hard to see. See pics.

Asking $140 shipped

PayPal FF, Venmo or Zelle for payment.

MPA Matrix competition side rails in black. Includes MPA weights qty 4 and Gray Ops aluminum inserts qty 2. All mounting hardware included. Very good used condition.

$Sold shipped

If you bought a rifle off the forum, a specific model that has very specific parts, and you didn’t ask if it was a stock rifle, and their ad doesn’t mention if it is stock or not, and the rifle shows up with all the good parts taken off, Would you consider that a shady business deal? For example, if you bought a Seekins Precision PH2 NRL which comes stock with a TriggerTech Diamond trigger, and it shows up and it’s not a Diamond trigger, would you have a problem with it?

Riflebarrelblanks.com

New here. I’ve read the rules regarding posting an item for sale in the forum. I am not trying to sell it here. I would, if I had the credentials, but I don’t. I’d like to get an idea for what it’s worth so I can put it on gun broker. I bought this off my neighbor ( fire sale) before he moved. I was with him when he purchased the rifle a year prior at our local gun store. I know it was only shot about 100 rounds. Stainless steel 24” barrel chambered in .308, 1:11 twist rate with 5R rifling. When he bought it, he had the muzzle threaded to 5/8-24, bolt knob (the football) removed and threaded a tactical style handle on. It has Nightforce bases and and elite Hunter Timney trigger. I bought it off of him because he needed the cash, I sold the H.S precision stock and the Nightforce scope on eBay, but obviously I can’t sell the barreled action. Am I even able to ship this? Is it worth more if I keep the scope bases and the trigger with it? It I hear a lot of good things about custom actions these days, but not a whole lot about Remington 700 actions except all the bad stuff.

Looking to swap barrels/calipers (7mm rem mag to 7mm prc) and am trying to decide between the 2 barrels. It will be used on a bench/long range rig. I have 2 other Criterion barrels and they shoot great. I've never shot a Shilen so I have no real experience with them. I was just wondering if one is "better" than the other. Also, for the Shilen, does the select match and match "matter" or what the difference is. Besides price.

And 3rd question... if i have a small barrel nut on my 7mm rem mag now, do i need to stick with that or do I need a large barrel nut. Or does that only matter for the barrel and how it's made?

Stock SOLD!