Anyone have experience between the two? Looking for the best low light optic I can get that has the build quality, turrets, etc as these two.
Not sure if there is something better….but I can get an Ultra Bright for about $2600 right now, but the Polar is still at that $4k.

Looking to sell my grayops bag stop, this is the longer version, i modified the back so it would sit further back on a masterpiece arms ba comp chassis. Does not affect its performance.

Looking for $65 shipped, payment via PayPal f&f or zelle. Sold!!

I am looking to complete the paperwork on a form for free suppressor from an individual to an individual in the same state. Upon going to fill out the e-file form it is asking for a FFL or SOT information and will not let me get past the first page. It is my understanding that if you're in the same state you're allowed to do a transfer directly to another individual. Is there something that I'm missing or do I just skip that first page.

Second ever bedding job on a kelbly action. When I pressed the action into the marine Tex a little bit oozed up around the bolt release. I have good release agent in there, but I’m trying to decide if I should try and wipe it out before it dries or if that will just just push it further in and cause problems. I haven’t touched it or moved it yet. Thoughts?

Galaco rifle scabbard

As new, used to display a rifle............a few minor "scuffs, bruises".................new list price $475................

$350.00 shipped............

Rifle Scabbard

Designed for lever-action carbines in 18†and 20†barrel lengths, the Rifle Scabbard is constructed of 12-13 ounce premium saddle leather. A hand-rubbed oil finish brings out the natural beauty and luster of the tan leather.

www.galcogunleather.com

I’m sure there’s someone on this site that could point me in the right direction. I’m looking to sell an old colt 1911 from what I can find it’s a 1929 first year production, chambered in 38 super auto. I’m debating putting it on an auction site, trying to get an idea of the value. Any help would be great. Thank you

Have a used but in great shape set of Vortex rings. They are 30mm tube and .87 in high. $115 shipped

Used but in great condition. Comes with all the inserts, wrench and 128 Gb card. Just don't use it much anymore.
$475 shipped.

$79.99 for 1000 ct

I’m looking at a number of scope options to put on either a 6.5 LMT MWS 20” auto loader or a 308 Tikka Tact 1 24”.

I currently have an NXS 3.5-15x50 that I moved from the LMT to the Tikka and I’ve been thinking about something with more magnification for the LMT.

Two of the scopes I’m considering are Nightforce. One is a pretty pristine NXS 5.5-22x56 and another is the same but with 50mm objective. Or, I have an option to get a very well used (but not abused) ATACR 5-25x56.

Is there a significant advantage of the ATACR over the NXS? It would cost about $100 more plus the cost of mount/rings with the added wear and tear.

Worth it?

#1 Nightforce NX8 4-32 x 50 MOAR CF2D Reticle, 2nd Focal Plane, 30mm tube, MPN C641. Probably less than 100 rounds on scope. C/W Tenebrex covers, box, throw lever and whatever else they come with new. Not a mark on it that I can see. Its still mounted so its possible there may be faint ring marks once removed. Rings not included. SOLD

#2 Meopta Optika 6 4.5-27 X 50, First Focal RD Reticle, MRAD, 30mm tube, MPN 653595. Great reticle for an all purpose scope. Very visible at low power unlike most FFP optics. Has illumination but not really necessary with this reticle. Nice locking elevation turret with zero stop. Optika 6 are great value and nice glass, not sure you can do better for the $$ This scope may have been mounted but I don't think it was ever used it. $675 shipped

December 7th a date which will live in infamy

For those who served and came home



and those who served and live on forever only in our hearts.



We thank you.

Probably a stupid question and I am good at that.

When Hornady came out with the 7 mm PRC, they pointed out that if you already had a 7 mm Rem Mag or .300 Win Mag, you could swap barrels and even use the same bolt face.

LIke any rifle where you might replace a barrel or trigger assembly, you don't need a 4473 federal transfer. Because those are replacable and not serialized. The receiver is holds the serial number.

So, if you put a 7 PRC barrel on a .300 WM receiver, is it still legally a .300 WM, which is what it was when you bought it and transferred with a Form 4473?

Do you run afoul if you don't file a change of caliber associated with that receiver?

Does it matter? The SOCOM MRAD, which you can buy, has .308 Win, .300 Norma Mag, and .338 Norma Mag barrels and parts. Only one receiver presumably having the serial number.

I try to foresee ways the commies could come at us and worry about crap like this.

SOLD

I have a Q Honey Badger in 300 BO (16" barrel) that is rejecting almost everything I've tried to feed it in a heavier, sub-sonic hunting bullet. Getting jams and in some cases, problems getting the charge handle to move after first round is fired.

The only two bullets that the folks at Q have suggested I try are the Maker and LeHigh sub-sonic hunting bullets.

Before I sink a bunch of $$$ on these two brands, can anyone tell me what luck they may have had in their Honey Badgers?

Bear in mind, a Honey Badger is not a standard AR15 action so what works in an AR, may or may not work well in the Honey Badger. (Don't ask my why).

Thanks in advance for any insight .

Foundation Exodus cut for Remington 700 SA clones. Been running an Impact 737 SA in it. Dark Distressed finish and lead weight kit. Cut for Badger M5 bottom metal (not included). $745 shipped CONUS. Venmo, Paypal F&F or add 3%.

Just got a JP LRI-20 in 6.5 Creedmoor. I’m used to reloading pressure signs for my bolt guns, but it’s the first gas gun I’m going to reload for. I Put about 200 rounds of factory Hornady ELDM 140gr through it and most of them came out with ejector marks.

1) I wouldn’t run my bolt guns with this load if I saw this. Would you say this means it’s over pressure and should I stop if I see this when I start to reload…or are gas guns harder on brass than bolt guns?

2) can I use the cases with the deflector marks and damage on the neck? They pretty much all have it and look like this. I have another 300 rounds I was hoping to use the brass on once fired.

Time to clear out some inventory for the new year. Most products at 20% off. Use DECEMBER20 for the code at checkout. Good until Jan 1st, 2025.

For those of you kicking off the 2025 Precision Rifle Series Pro season in Arizona this coming weekend, we will be there as a sponsor. We will have some goodies at the prize table as well. If you are going and would like me to bring you your order, drop it in no later than Thursday this week and use the notes field to indicate as such.

Thanks and see you there.

https://mcleodprecision.com/

Kevin

P.S. Stay tuned for some new product drops coming in Q1 2025. Doing some design work over the Christmas break. Add us to your watch list for those announcements.

Has anyone out there played around much with the 'classic' 308 Norma Mag in a long barrel? (or 30-338 Mag)

Wondering about what speeds you're able to run up to with 225's or 230's & modern powders

Like New Geissele scope mount in desert dirt color (DDC). 30 mm tube.

Looking for 225 shipped.

Paypal FF preferred.

Selling a Geissele ssa-e trigger. Asking $130 shipped. Venmo only please

Hi,

Fresh build of an AR-10 in 6.5 CM.

Stag-10 upper and lower receiver set
BA 24" Stainless barrel
Tool Craft High Pressure dual ejector bolt

I've put 90 rounds through it, and it has ran and shot great it is pretty accurate as well.

When manually manipulating the bolt, it is difficult to extract a round out of the chamber by hand. It can be done, but its definitely not smooth or 'easy'.

I have tried both a factory round, as well as a reloaded 'dummy' round that was fired in the rifle, then the shoulder bumped .005". They both behave the same way upon extraction.

The weapon functions as expected with no issues when being fired this is only an issue when manually operating it.

Any ideas? Is this normal? Maybe because of the double ejectors or something?

Received a message from @LR l0ngyards
After posting in a for sale ad. Trying to get me to send him 3400 dollars.....

@MarinePMI

Thanks

Doc

As noted looking for the Black (EuroOptic) version of the Rezor Gen 3 6-36 in MRAD. They should be back in stock in a bit but was seeing if anyone had one that was not in current rotation and in good condition (original box and stuff preferred but not a deal breaker) . Must be able to prove you have the scope, I am not an idiot, so no scammers please. I have read the warnings but still hopeful...lol. So far the 10+ things I have bought here went perfect and hoping not to break my streak.

Selling my tripod setup. Leofoto SA-324CL tripod with the Really Right Stuff Anvil 30 head.
$680 shipped