I've been working on starting to reload for 8.6 blk and figure it would be good to start a thread and share information specific to reloading.

Q has some tech data posted on their website here - https://liveqordie.com/86-technical-data/

Cartridge Print - https://store-fwcq7xdl4a.mybigcommerce.com/content/8.6BLK CARTRIDGE.pdf

Chamber Print - https://store-fwcq7xdl4a.mybigcommerce.com/content/8.6BLK CHAMBER.pdf

The first hurdle was figuring out a way to resize brass since factory brass I'd imagine is a ways out. I did manage to get my hands on a set of prototype 8.6 blk reloading dies that I'll be using.

Left is a Q head stamped piece of 8.6 blk brass, the right is once fired Hornady 6.5 Creedmoor



I noticed at first I was getting some ripples in the neck when I did a full length resize and neck up from 6.5 to 8.6 all in one step.


Running the brass through an Annealeez proved to give much better results when pushing the shoulder back.

Selling 100 rds of .50 BMG API by Freedom Munitions, packaged in 10 plastic holders as shown. Don't want to split up. These have been out of stock for a while.

$450 + shipping... Zelle, discreet PP F&F or USPS MO. PM me your Zip for shipping estimate.

For anyone looking to put together a premium bench/competition rifle we have two Coup De Grace barreled actions in 6 Creed or 6 GT. Click this link to check out what we have for the Coup De Grace barreled actions. Call 435-462-1607 if you have any questions or want help ordering.

I see Silencerco as #2 manufacturer for most used suppressor in the PRS series on their website..

Is there a model or two that is particularly stand-out for the series?

Hello All,

I'm trying to figure out if I've got unrealistic expectations or if I need to get some instruction. I understand that the basics become more important as recoil increases, and I think I've got the basics down pretty well. I've got a switch barrel rifle, and when I shoot 6.5 Creedmoor, I'm a consistent 1/2 MOA shooter at 100 yards (on a good day, I've shot multiple groups in the .25-.35 MOA range), and I can hit an 18"x30" silhouettte at 1k 8 out of 10 if conditions aren't too crazy. When I shoot the 300 PRC, I'm shooting .6-.75 MOA at 100 yards and 5 out of 10 at 1K. I'm shooting a heavy suppressed rifle, so I don't feel like I'm flinching. Do I just need to get some instruction, or is there something I'm not thinking about?

I'm using Hornady ELD Match for both calibers.

Thank you!

Cut to fit the Impact 737 or Lone Peak actions this barrel is chambered in 308 Win with a 1:10 twist and is 20" long but can be cut shorter. You choose the finish on the barrel. Can ship within 7 days. Check it out here 308 Win Pre-Fit barrel. Feel free to call 435-462-1607 with any questions or if you need help.

SOLD PENDING FUNDS

Original Owner

• AICS 2.0
• Fits a Short Action M700.
• Was bedded for a Surgeon 591, so may require minor mod if bedding a standard M700 SA footprint.
• Everything works great, folding hinge is like new, solid and straight.
• Stock was bedded and cerakoted by APA in 2010 and has some scratches to the paint, but the skins are completely intact.
• Includes Atlas BT10 Bipod with AICS adapter as shown.
• $1,600 shipped, or trade for MDT ACC Elite Chassis M700 SA, RH.

PayPal FTF, Venmo, or Money Order accepted.

PM me with questions.

thank you,
Jason

This is AI PN - 26699PB

Accuracy International M700 Long action chassis in Pale Brown. New condition, still in the original box. Comes with one magazine and the hardware.

$1100 shipped

Payment via Venmo, Zelle, CashApp, or Paypal

SOLD a Grey Birch 16" Folding La Chassis for a right hand CZ 457. The chassis includes the bag rider sold by Grey Birch and a MDT carbon fiber grip. I'm asking $380 shipped. The chassis also has a thumb rest and a spare mag holder that were 3D printed by a fellow shooter.

For sale is a gently used Kestrel 5700x Elite. Everything works. No scratches or damage. If you want more pics PM me. Sold OBO

Hi all

First post here..

Original WW2 US Snipers

Top to Bottom

1) 1903 USMC Unertl (1.52 and known rifle)
2) M1C (not a restoration and WW2 configuration)
3) 1903a4 (first block 3.42)
4) 1903a4 (last block 4.9)

Greg Carlson

Welcome to the Kestrel Meters Ballistic Support Thread. This is the official world-wide support center for Kestrel users, hosted right here on the Hide. Look for product news, Link app and Kestrel firmware version updates, PC program information and ballistic support.

Either new or like new mounted for display. Unfired. Prices shipped. Handguards do not come with barrel nut wrench. Electronic payment only.

Atlas S-One Handguards:
9.5" FDE $100
13" FDE $110
15" FDE $120
16.6" Black $130

Aero M4E1 AR15 assembled uppers black $100ea

Aero upper with 12" Ballistic Advantage nitrided 1/7 twist CMV 4150 barrel, S-One handguard, gas tube, clamp style gas block, charging handle. No BCG $375

FOR SALE: 3 BAGS OF 200 PIECES EACH

UPDATE: These will now ship de-capped with primer pockets lightly cleaned on a Frankford Arsenal Prep Center. See the pics of 200 freshly done for an example of delivery condition! Price now reflects that labor and time. The case on the green loading block at J-5 has been replaced with a good piece. All necks are pristine.

• 600 pieces of 1x Fired Hornady Factory 6.5 Creedmoor Brass.
  • De-capped using a Lee Universal de-capping die.
  • Bagged in 200 count zip-loc bags.
  • All 140 ELD-Match Factory Ammo. These are Large Rifle Primer Factory Cases
  • Shot from a Proof Comp Contour 26" SS Pre-Fit barrel for my Zeus QC SA,
  • Corn Cob Media + polish tumbled.
  • Will not ship in OEM packaging.
  • Came from 3 factory case lots.
  • ONLY SELLING THE BRASS SHOWN IN THE PICS.
  • Price: ALL SOLD PENDING FUNDS

Prices are firm unless otherwise stated.

Accepting PayPal F&F or Zelle.

Avoid the scams - PM me first.
Straight up buys > than offers
No transactions will be held for later payment.
Be prepared to buy please. If you are not ready, I will move to the next active buyer.

I have a BNIB Leupold FDE Mark 5 HD 5-25 PR2 reticle. Just decided to go another route. I’m happy to FaceTime/call to verify I’m legit. $2,000 shipped tyd.

Thanks!

Build breakdown:
Seekins billet receivers
Seekins lpk
Jp low mass bcg
Bcm charging handle
Triggertech diamond flat shoe
Magpul fixed stock
Seekins handgaurd (this is the style that mounts off the integral upper handgaurd mount. It's not mounted off the barrel nut)
22" 6arc bartlein spiral fluted 7.25 twist +2 rifle length gas setup from craddock precision with matched headspaced bolt head
Superlative arms restrictive/bleed off style adjustable gas block
Area 419 hellfire 6mm
Vortex cantilever mount
5 - 6arc ASC steel mags

This rifle shoots lights out with the 2 loads ive worked up for it. Shoots just over 1moa out to 1000y (confirmed with shotmarker target at 1000) with the 90gr scenar load. Barrel has around 600rd down the barrel. Hate to sell it but could use the funds elsewhere. Price is shipped to your FFL unless you're a missouri local and we meet in person. Will provide load data after purchase for 90gr scenar and 95gr vld
$2000 shipped and insured

NO TRADES.

Like the title states, I have 1k Berger 109 LRHT 6MM Same Lot $500 shipped these are new sealed 500ct boxes.

I have an original MDT Send It level with factory mount asking $150.00 shipped

Not sure if anything interesting or just a distraction? For those interested there is a link to the records below.

Tulsi Gabbard announces the release of 230,000 files related to the assassination of Dr. Martin Luther King Jr. Ironically, a Republican administration is detailing the events of how a Democrat administration targeted one of the most beloved Democrat legacy names.

Click to expand...

https://theconservativetreehouse.co...30000-documents-related-to-mlk-assassination/

Records Related to the Assassination of the Reverend Dr. Martin Luther King, Jr.

I am selling a low round count Saiga AK in 5.56x45. It has been converted to pistol grip. It has also had an AK74 front sight added. The muzzle is threaded 1/2-28 and is hidden by the AK74 muzzle brake when it is installed. Amazing trigger. It is tuned to perfection and runs like it should.

Comes with at least 5 magazine and probably more if I can find them.

I will gladly provide pictures via text.

$2,500

T3x chassis gun by J&A outdoo, Nocpix ace l35 , and i have either a warrior tripod setup that can go, or a 2 vets QDT v2 with invert 60 head that can go with it. Scope it less than6 months old, be a good package to hit the fields with. If interested reach out and i can go over any questions. The rifle is listed on here separately.

4500$ bundle, shipped to ffl , insured.

Yes i will ship!

$100 OBO shipped used about 500 rounds then went another route.

Lightly used waypoint, has 6 boxes of Hornady 175gr precision hunter down barrel. Shoots consistent .5-.75” groups.
Awesome rifle just upgraded to a custom build $1600 shipped obo scope not included

American rifle company Coup De Grace long action pivoting handle
Proof 20” 1/8T 5 grove sendero
20 rounds down barrel, shoots .25-.5” groups.
2700 FPS with Hornady precision hunter 175g
Only reason for selling is I messed up when ordering. I swear the CDG was BDL compatible but it is not. Selling to get into a BDL style action
$2200 shipped obo
Stock, scope, trigger, bottom metal not included but could sell if someone wanted
WILL NOT SEPARATE BARREL AND ACTION

A couple years back I traded into an 18"JP LRP 308. Fantastic gun and shoots fggm sub moa. Came with the proprietary JP HP bolt and firing pin.

GF likes to make noise, not a bad shot but just enjoys shooting what costs the most. Put a 50 on the table and she wants to shoot it like it's a 22... anyways. I had some loose tula steel case and Hirt 7.62 in the bag so I gave her a mag full to plink with. Broke the HP firing pin. Hard primers, is this common or just random bad luck?

I purchased a couple hp firing pins and a JP standard bolt and firing pins, gas rings for both. Would a standard JP 308 bolt and firing pin be less likely to break in the future with fggm or surplus? Any other maintenance parts I should get? Thanks in advance