Loooooong time reader, first time poster.

Have a few bolt guns and a few gas guns that can get me out there. Everything from 6.5 to 338

Consistent repeatable hits at 1k.
Looking to go out to a mile one of these days

Thanks for the knowledge, hoping to continue learning more.

Got a new 40% off Apex Optics cert. make me an offer. Can call, FaceTime etc.

Post your loads

For Sale:
N-VISION NOX 18
BAE core
640 resolution
Comes with 18650 batteries and charger
Battery extender tube
ADM mount included
2.5 years of warranty remaining

$4,100.00 shipped price drop to $3,800.00

Severance / 2022 Season 1 , Sci-Fi drama ,
Apple original production . Season 2 scheduled for Jan. 2025
Season 1, Is a pretty good watch, I pretty picky about my SciFi, thought it was a pretty fresh SciFi story line, and held my interest all way though.
.

Selling a brand new in box Burris XTR Pro Black SCR2 Mil (202222)

$1850 Shipped

Like new Vortex VMX-3T magnifier. Includes original box and paperwork. $SOLD shipped

Please don't post in thread, just message me. There are a lot of shady lurkers waiting for your "I'll take it". If you would like a phone call or video chat we can set up a time (I work nights, which is also the reason I might not respond immediately).

Price is net to me (discreet PayPal F&F, +3.5% for G&S, I can also take Venmo) shipping is included.

Aero Solus .382 bolt head $SOLD

New take off, never fired a round.

Lee Precision Dies for large-cartridge rifles

For those looking for dies for large-cartridge rifles, at very affordable prices, consider Lee Precision. [Their dies are made inhouse, in the US (WI).]

.338 LM (7/8-14 thread) - https://leeprecision.com/search?q=.338+lapua+dies - $47 (actually $46.98) for a SET (sizer, seater, and shell holder)

.416 Barrett (1 ¼-14 thread) - https://leeprecision.com/search?q=416+barrett and .50 BMG (1 ¼-14 thread) - https://leeprecision.com/50-bmg-dies - $140 for a SETs (sizer and seater w/o shell holder - the shell holder is $20, https://leeprecision.com/50-bmg-shell-holder)

While they do not offer dies for .375 CT or .408 CT, they do offer custom dies…which could be to CT specs – see further down. [Note that there is a requirement that they have a shell holder – in the CT case, that’s their #17 for the .505 Gibbs (“parent” of the CT).]

They also offer a 1 ½-12 to 1 ¼-14 adapter bushing for use with a press that has a 1 ½-12 top thread (Lee’s large cartridge dies are 1 ¼-14) https://leeprecision.com/1-1-2-12-to-1-1-4-12-die-adapter-bushing - $12.

And, for those that want micrometer-adjustable bullet seating, they now offer a “micrometer adjuster screw” for $20 – yes, twenty USD! Versions for all their dies, same price.

They also offer custom dies at the SAME prices as their non-custom dies – https://leeprecision.com/custom-services-custom-rifle-and-handgun-reloading-die-sets ...BUT there is a set-up fee of $250-$350 and lead time of 12-16 weeks (https://leeprecision.com/search?q=custom+die+set-up+fee). You provide a few dimensions, 5 fired casing, and 3 desired bullets. Chicken or the egg for CT, and for XC? No. Peterson has the “base” (un-fire-formed) brass. Seating a bullet w/o a seater die would seem to be the issue…so you don’t seat a BULLET. You use a wad-of-tissue-paper plug, enough powder to get the case properly formed, and a Cream-o-Wheat filler between the powder and the tight-fitting plug (tap down the CoW until its up in the neck before adding the wad – needs to be compressed). It works well. I’ve done it to save the cost of expensive large caliber bullets. Do it 3x for each case to guarantee exact fit to YOUR chamber. [Envision a range day with primed brass, a de-priming rod, small hammer, a hand priming tool, primers (for the 2nd and 3rd round of forming), a funnel, a quantity of tissue paper, individual pre-weighted bags of powder, individual “pre-weighted” bags of CoW, and a quantity of extra CoW for just in case. CAUTION – make sure the plug is in really well. Last thing you want to do is dump a load of powder and CoW into your action. Consider elevating your rifle as you load and fire rounds – one after another, single-shot style, NO mag feed. AND be very careful where the muzzle is pointed – what comes out the muzzle will still be seriously dangerous.

Lastly, they also have a very reasonably priced single-station press - https://leeprecision.com/classic-cast for $260 – or, that press, their .50 BMG die set, ++ for $425… if you are doing .50 BMG (their only with-dies option).

NOTE: Going forward, they recommend that you use their sizing lube, $6/tube. Worth it.

NO, I’m not a Lee shill. Just thinking that some would-be large-cartridge reloaders would find that Lee has viable solutions for intro-to reloading thru long-term reloading.

05012025 - For whatever reason, the Lee site no longer hosts the 2025 version of their catalog for online viewing. Use this link instead https://www.henrykrank.com/media/pdfs/Leepdfs/cata/Lee-Reloading-Catalogue-2025.pdf

Selling super clean, like new seekins precision SP10M
-16 inch .308 upper
-100 round count
-sp10M official paperwork/warranty and test groups fired from the factory included
-sp10M soft case included
-ATC single stage trigger

*can/bipods/optic/arca not included, but can be
*selling because it doesn’t get shot. I have an Sp10m in 6.5 cm which I use far more.


Price:
$3300 OBO


WTT for (plus cash):
leupold Mk5 5-25/7-35 pr2
MDT hnt 26 LH folder r700 SA
Inverted tripod
Two vets/RRS inverted tripod

Looking to to offload my much loved, but sadly unused, Voodoo ML. She's in great condition and works as a clip on thermal should. This is the Gen I model with the "punisher" start up logo.

Looking to get 16k shipped to your door. No trades, cash is king here. If you have questions at all, give me a shout. I have literally hundreds of photos and videos through this unit.

I hadn't seen this posted here yet, but SAAMI added a 6mm Grendel derivative called the 6mm Advanced Rifle Cartridge or 6mm ARC to their newly accepted cartridges list.

6mm ARC introduction pdf

The case looks like the shoulder has been moved back, and the neck is a little shorter as compared to a Grendel case. The published instrumental velocity shows 2,700 fps for a 108gr bullet.

I'm curious if Hornady is behind the standardization of this cartridge, the name seems to fit the current convention (PRC vs ARC), and the published velocity utilized a 108gr bullet as opposed to 105gr or 110gr.

Anyway, it's interesting to see a 6mm Grendel becoming SAAMI standardized, hopefully AR barrels in this chambering will start flowing soon.

Sen. Adam Schiff (D-CA) paid homage to the late Sen. Dianne Feinstein (D-CA) and introduced “the ‘assault weapons’ ban of 2025” Wednesday morning.

In an X post, Schiff explained that his legislation would “ban the sale, manufacture, import, and transfer of military-style ‘assault weapons.'”

He claimed there have been “486 mass shootings involving ‘assault weapons'” since 2006, but did not provide any sources to substantiate the figures. He did reference Feinstein’s introduction of the first “assault weapons” ban over three decades ago, then claimed her ban “had a dramatic impact on mass shootings” during the ten years in which it was in place.

Original owner and all in excellent condition. No scratches on body or lenses. Used at a few HPRS matches only. Performance and optical clarity are exceptional for the price point. Everything in photos included, scope, eyepiece, soft cover, end caps, fitted case, box. $1875 shipped. PP F&F

Custom 22/45 22lr. Volquarten aluminum grip with tandemkross trigger and internals. Ruger lite upper with complete volquartsen bolt. Tactical solutions rail/sight combo. Also has a custom screw takedown in the rear. Gun is very light. $750 shipped.

Hello all,

So being a Howa owner, it's always nice to see what modifications or changes others do to theirs. Plus, the howa 1500 action is a great shooting platform and typically very very accurate. I noticed there is no such thread and decided i should start one seeing as how Bergara, Tikka, RPR, etc all have one. I'll start off with mine.




In the pics, she is sporting a weaver tactical 3-15x50. I have now mounted a Bushnell lrhs 4.5-18x44 and will get pics up with it when I get a chance.

Primary Arms SLx 1-6 SFP with the 223./.308 BDC Ranging system/reticle. Has the extended throw lever attached. Great scope. Like new. Has been opened. Can throw in for free the PA Deluxe mount too if wanted.—pics below.

$180 obo Shipped! Zelle please and thanks for looking!

Impact 737 prefit in 6 Creedmoor spun up by area 419, 7.5 twist, 5/8-24 threaded, Bartlein blank, heavy Palma per previous owner, cerakoted, original owner had it cut to 16”. Per previous owner 125 rounds on it. He was able to get to 3500 fps with lighter projectiles. I never shot it so I don’t know any data on it. There are light surface marks on the cerakote all over, worst is pictured but its super light surface and not deep into metal.

Would make an awesome shorty setup or truck gun for coyotes.

$525 shipped and insured

Apparently no one cares anymore

How long is the wait time on a form 4 to date? Post how long you have been waiting or how long you recently waited before it was completed and sighned.



JAY

Funny that the Modelo beer that has done all its advertising towards hispanic identity...

Is tanking.


If they wanted to be Americans, they should have ordered something other than Mexican beer!

Im having an issue while seating 223 for my PRS gun. Im using redding competition seating die. I originally had the standard seating stem and it was making a big ojive dent. Then tried the VLD long stem and it's still giving a dent but not as bad. It's still avaliable big enough dent to change flight. I don't think redding makes a longer stem for this issue and there's no contact number to call. Any solutions?

Using:
Norma brass
77gr TMK

Zermatt Cert for 25% off. I’m not gonna be able to use it. Expires March 16th, 2026.

$200 and I can either mail you the cert or send you a picture of the whole thing.