Soooo.....

Many years ago as a young Marine, I remember my first M14 and it was love at first shot. I later became part of a small USMC sponsored shooting team (not the official USMC Rifle Team) and was issued a match M14 built by the USMC Rifle Team armorers. This rifle is what i first used to shoot 1000yd matches with only Iron Sights.

After more than 40 years, I have finally made the move to purchase a Armscorp "M21" Marked M14 NM Semi-Automatic Rifle with ART II Scope. In addition to this cool scope from the Viet Nam era, the barrel appears to be made by Krieger. I purchased it through the Rock Island Auction and am currently anxiously awaiting its delivery.

Can anyone point me to resources for training material on the ART II scope?

Like new condition. $old shipped

Venmo, Zelle, PayPal F&F

Like new Sako Quad Varmint rifle with an 18” factory threaded straight taper lilja barrel. Rifle shoots Midas + in the low .2’s with a suppressor. Very accurate rifle. Barrel has less than 200 rounds on it. I do not have the original barrel. Also comes with DIP Picantinny scope base, aluminum trigger guard, and bolt handle. Comes with 3 five round and 2 ten round magazines. Feeds and extracts perfectly.

Looking to add a TBAC Takedown 22 (black) to my collection. Anyone have a good line on a BF deal? Thanks!

Looking for some first hand experience.

Has anyone here had both an atacr 4-16 and a Mk5 3.6-18 (illuminated) with Tremor reticles?

How does the reticle brightness compare between the two?

I have owned (and used prior) the non illuminated mk5 for about 6 years or so now.

I decided I wanted an illuminated version so that I could pull double duty and drag my mws out to hunt with here in Michigan, and was going to get another mk5 but got a good deal on an atacr 4-16. I mounted it up, and honestly the illumination seems downright unusable unless on max power in very very low light.

I’m wondering if the mk5 would be better and thus usable at minimum power (just need a solid dot to aim with at 3.6 not usable tree) or if I need to be looking elsewhere altogether.

Thanks

Looking for a black Hawkins 34mm one piece mount
1.27" height 0 MOA cant

Have one in 20 MOA if anyone would be interested in a straight trade, but would also buy one outright

WTS EuroOptic Vortex 30% off MAP for $100. First PM with “I’ll take it” gets it. I accept MO, PayPal F&F, Venmo, or Zelle. Expires 7/25/2025

Looking for advice. I am using a gen 3 Henderson trimmer, have been for a while. For some reason I just started getting some scoring lines on the inside of the neck after I trim them. You can see in the picture, they aren’t just surface marks, you can feel them if you run something over them. Anyone else run into this? Do I just need a new pilot?

Howdy,

Im trying to decide which one to get (or just get the kit). I can find the long and hook but I cant seem to find any pics of the "teeth". Does anyone have a pic of the teeth plate installed? Hows the functionality? What are your guys opinions for prs style shooting, which one works best?

Like new Wilson Combat 9mm AR-15 barrel with Wilson Combat QComp muzzle brake. Over $340 new.

- 1-10 twist
- Stainless Steel
- Fluted
- Bead Blasted
- 16"
- Threaded

Barrel is like new with less that 200 rounds. I recently SBR'd my lower so this barrel needs a new home. Link below for actual product.

$175 shipped to your door.

Includes 15" FDE MLOK rail with mounting hardware.

USPS money orders or discreet electronic forms of payment accepted.

IM/email for any questions.

I found some 130 gr Sierra Gameking bullets (#1728). I have Varget and H4350. I‘ve had good results with Varget and 123s, and H4350 with 140s. These 130s are right in the middle. This Thread indicates Varget might be slow for 130s and my manuals contradict each other for which powder yields higher velocity. Rifle is 24” bbl and load will be used for deer hunting. which powder should I try first?

I have some new ADG 7 Prc brass for sale $85 per box of 50 shipped

Enjoy!

Login to view embedded media

Shit on bergera’s shit too much ?

We know all about leprechauns and their gold is Bergera a sponsor ?

5/8x24 muzzle threads, .135FB .274NK, chambered by Blue Mountain Precision. Has between 600-700 rounds through it. I didn’t get better than 1.0 moa with it.

Looking to get $300 shipped.

I have a like new less than 50 rounds down the tube 6mm Creed 24" Carbon Zermatt TL3 pre fit. I would like to trade it for a 308 or 6.5 Creed in a 20" or 22" barrel.

I'll post a picture of it in the action as it's all still together. I really don't want to sell it but I will for $800 Shipped net to me. You cover the fees.

** Nephew killed 2 deer with it opening weekend of KY season. I can get you all the pictures you want of the barrel.

Lightly used and in excellent conditions. Glass is crystal clear, no scratches or marring on scope finish, turrets are nice and tight. Comes in original box

Tube is 34mm, reticle is ERB7C MOA

I also have vortex throw lever and tenebraex scope caps that can be negotiated in.

Scope alone is 2100$ shipped
Text 978-844-6896 with serious inquiries only

I bought this rifle new from Eurooptics about 1.5 years ago. The barrel is the original Bartlein barrel and it has 1000 rounds in it but still shoots 0.2 - 0.3 MOA (I'm including target for the last seating depth tests).

The Ace brake is included. With this brake, no blast or recoil is really felt.

Bipod, scope and mount are not included.

$3600 shipped.

L3 lwts shot count 480, extra battery carrier, adm throw lever mount and original thumbscrew mount, clip on eyepiece and shuttered eye cup. Not the original owner, sent it back to l3 to fix a collimation issue and it has been great since.

$5k

I put this together from a builders set years ago and it’s never been fired.

Sp10 builders kit
22” proof 6.5 creedmoor ss barrel (not carbon)
Seekins select gas block
Solgw marked Lmt dual ejector bcg
Raptor ambi charging handle
Seekins ambi safety
TT diamond flat shoe ar10 trigger
Ergo 0 degree grip
Lmt 308 buffer tube and Dmr stock
Tubb flatwire spring
Unsure of buffer
Sawtooth rifles full length R-lock dovetail rail
Has an a419 hellfire adapter that I can take or leave.
$2700
Will entertain offers to part out.

Weibad mini stock pad, off an MPA $30. **SOLD**

ColeTac tripod leg wraps. $45.
**SOLD**

Brand new Aero Pro Ambi AR safety selector $40 **SOLD**

I traded into PWS 6.5 Creedmoor with a 18 inch barrel. I know that they are a long stroke piston rifle. My question is as I no nothing about piston AR platforms is can it be rebarreled as is or changed over to a DI rifle down the road if you shot the barrel out? Are the upper receivers different to a DI upper? Or would you have to send it back to PWS to have a new barrel installed?

Thanks,
Dan