I have an AGM Neith on my 300blk currently. For the money, I love it. I'm in need of an optic for my .308 and was considering going with a thermal, but I'm poor so my budget would be <$2k. I was looking at the AGM Rattler V2 25-384 then I got to thinking about the possibility of just getting another Neith and using the other $1200 towards a thermal monocular for spotting.

I'm relatively new to this. Which option makes more sense for pig hunting?

Brand new, never used. Just been sitting in the safe. Bought direct from American Rifle Company. $850 800 shipped to your FFL. PP FF/Venmo conus
Nucleus Gen2 Bolt Action (Right, 20 MOA [5.8 mrad], Long Action, 0.535"

As requested............

There are several key measurements that need to be taken prior to fitting a rifle barrel to any receiver. Of course, if were talking about a trued Remington, Winchester, Savage etc. these merasurements need to be taken after all receiver work has been completed. Prior to any machine work being performed the barrel blank should be indicated in to .0002" or better. This barrel was indicated in to .0001" TRI.

First, as I see it, the key measurements or information that is needed are as follows;

1. Headspace (include recoil lug with this measurememnt)
2. Tennon diameter
3. Tennon Length
4. Threads per inch (TPI)
5. Bolt face depth from bolt nose rim
6. Bolt lug face's from bolt nose rim (front of lugs)

The headspace on this receiver is actually 1.272". The tennon diameter is 1.0625" x 16 TPI (my signature receiver) The tennon length is determined by the relastionship between the rear of the breech just ahead of the bolt nose recess (outer ring) and the and bolt lug faces. I allow .005" clearence between breech rear and bolt lug faces. When measured, the bolt face and bolt lug faces are the same measurement from the bolt nose rim on my signature receivers. This isnt always the case with other receivers and why this is another measurement you need prior to fitting a barrel.

Getting headspace (1.272")


Getting bolt nose to bolt face and lug faces (.160")


OK, at this point I have all I need in order to fit the barrel. I just need to load the barrel in the lathe, face it off and mark my tennon for the first cuts. I set a dial caliper to my headspace measurement of 1.272" at this time and load the barrel. I use the depth measurement portion of the caliper to get enough barrel sticking out but not too much. Sometimes, I scribe a line on the tennon as you ses here. look close.



Here's a better way to mark the tennon length



Now, set tool center and releife. With machine running touch off on the workpeice and zero the dial, turn up Godsmack and away we go.








Bam, done...........1.061"

Looks like I used a similar thread title previously with regards to who had keys to your house...

Well this one isn't too far from that topic either but thought it might be an interesting chat nevertheless.

The question for the thread is- how much is the going rate for an acre of land where you live. You don't need to share (1) where you live, (2) how much land you own, (3) what you paid when you acquired it. Those might all make for a good conversation but just reckon that while there's a lot of factors that unite the posters here, real estate is wildly fickle.

To start the conversation off- I'll first acknowledge that with the new house I still don't own a full acre of property. I was somewhat strategic in the property that I did purchase in that it borders a mountain in the backyard (see my post about the enjoyment I've had listening to owls for example: https://www.snipershide.com/shooting/threads/im-a-big-fan-of-owls-personally.7231649/ or coyotes: https://www.snipershide.com/shooting/threads/more-excitement-from-my-backyard.7241269/)

But it's a rural development and somewhat new so looking at the lot sizes left for sale here on the mountain I reckon I can answer the question....

An acre of land here would approximately be around $70K. That's an incredible change from 2009 when I was offered either 10 acres of land in GA for $14K or 14 acres of land for $10K (it's one of them but I think the 1st one is right).

How are things in your neck of the woods?

-LD

Login to view embedded media
Protecting and serving the shit out of the community.

Self filming multiple crimes while drunk . Come on KY surly you can do better than this .

Warning: the video is real Jerry Springer shit - loud badge monkey and his fat loud mouth wife .

Also funny that county prosecutor said there was no crime in the video- other than drunk driving , assault, trespassing , threats and unlawfully running someone’s name through criminal background checks. WTF.

Looking for a variety pack of 6.5 cm, 6 cm, and 22 cm neck sizing bushings. Prefer titanium nitride but will accept others. I’m also looking for 6cm bushing full length sizing die as well as 22 cm bushing full length sizing die.
At minimum I am looking for the bushings.
Let me know what you have.

Looks like pulsar announced their new thermals, all with 60mm objectives and 2.5x base mag. Display is upgrade to a round 2560x2560 resolution as well. I feel like the XL60 is somewhat interesting, but lagging in what other manufacturers are offering. Maybe they are waiting until SHOT show to announce a 1280 in a scope.

Login to view embedded media

Selling my like new (used 3 times including this weekend at mammoth) Envision MARS. Comes with manual, quick reference guide, soft case, and pressure switch.

Only selling cause I have the chance to buy a Sterling Davenport Rifle.

In like new condition. Warranty still good. Bought new from CR2 shooting solutions in December. Have receipt.

$6250 shipped with no wait time. NO TRADES.

If you’re at mammoth and want to buy this after the comp is over we can discuss.

Site has a 48 hour bump rule. Do not bump before then again. Edit your original post or last post if wanting to add anything between the 48 hours. Post will be deleted and you will be banned if it happens again.

I am selling the following magazines:

SOLD 3 L3I Elite Rimfire Magazines** for SOLD (shipped)
SOLD 3 Vudoo V22 Standard 10-Round Magazines** with Hoz & Shield +6 extensions for SOLD (shipped)

I accept payment via Zelle or PayPal (Friends & Family).

Please feel free to send me a private message if you have any questions.

Anyone have experience using the Element Optics Rangefinder Module? It includes a ballistics app and displays the solution.

Note that the Rangefinder Module can be used with any scope. Not just the one shown in the images or video.







Login to view embedded media

Hear me out…..


Login to view embedded media

Well boo hoo, maybe pay for a seat inside.

Login to view embedded media

Got myself an Athlon Helos 2-12x42. The illumination dial was so tight out of the box, I thought it was stuck permanently. I can manage to turn it very slowly with both hands if I really try.

Has anyone else had this problem? I'm going to see if I can keep turning it until I loosen up, but it's so stiff, it won't be long before I get blisters.

I have a Gunville M40 stock for sale. I scored another M40 stock and no longer need this one. I have sanded on it some as they are pretty rough from Gunville. Stock will require minor inletting for the barrel channel and action. Correct Butt plate has been added and stock has been sanded to match. Several coats of BLO have been applied. It's really close. Looking for $200 shipped. Payment via PP F&F Thanks.

Login to view embedded media
Just another hero who beat a handcuffed man and beat his head into a wall until he was paralyzed.

He has been suspended and the tax payer will be on the hook for $40 million so Justice served I guess .

But I’ve been told on good authority that this is the ONLY way to handle people in handcuffs because officer safety and all

Brand new in box Microtech MSI Frag G-10 OD Green. Won in it a raffle. $175 shipped. PayPal or Venmo.

this guy really get's it and i hope what he seeks happens. i have my doubts,mostly because of the deep corruption and power madness of the rinos,but....

https://tuckercarlson.com/tucker-show-ned-ryun

I am selling two MDT LRA MV3 mounts.

1. MDT MV3 90 Picatinny Mount. Allows you to vertically mount your Send It level upward. For info see: https://mdttac.com/mdt-lra-mv3-90-mount/. SOLD!

2. MDT MV3 90 Inverted Picatinny Mount. Allows you to vertically mount your Send it level downward. For info see: https://mdttac.com/mdt-mv3-inverted-90-picatinny-mount/ SOLD!

I paid $49.95 new for each, and both items are currently on backorder with MDT.

Selling for $35 plus each plus $4 shipping. Will sell separately or as a pair.

I accept Venmo, Paypal FF and Zelle.

If interested, please PM me directly through this post.

Looking to speak to an industry rep that would be interested in seeing another state become a market for their products.

I have joined a "pro se" court case in Massachusetts pushing back on some recent expansion of gun "laws".

One of our goals is to open Massachusetts to the use of suppressors.

My friend leading the case is going to seek help from Sig Sauer as expert witness to explain to the court suppressors, their function, their benefit, and how they are misunderstood.

We obviously seem like huge underdogs but we are taking advantage of a recent MA SJC ruling that determined the 70 year old law banning switchblades was unconstitutional as switch blades are arms under the second amendment.

Ours will be the first case to use this wedge.

Two other cases, using real lawyers, were dropped by the plaintiffs after having taken huge amounts of money from donors and expending the effort of a 100,000 signature initiative.

I don't think Sig Sauer will be willing to help us. I hope I am wrong in thinking that but their contracts, to include pistols to the MA State Police, has me thinking they will be on the side of the defendants - the Commonwealth - or at minimum - neutral.

Our current governor ran Smith and Wesson out of the state when she was AG, I have no doubt she would trash Sig Sauers contracts and go to Hi Point if Sig acted up.

We are give send go funded and just regular peeps.

Thoughts.

Selling a few extra pieces of my PRS startup gear that I don't see a need to hold in the bin.

▪︎(2) MDT Poly +2 Magazine Extensions BNIB. - (Bought these and was coached by experts like you all, that they are not needed or recommended for the MDT 12 round metal mags. One was test mounted & repackaged. Never used. Both are still in BNIB condition.) - Both SOLD

▪︎OBI Link - MLOK. BNIB - (This unit was installed on my new and only PRS rifle this month. Taken off the same day. Never fired or taken out of the house. I decided to go with the OBI QD post instead cuz I had 2 of them. Lost the OEM bag tag but ships in the OEM bag.) - SOLD

▪︎Vortex SUREFIT Neoprene XL Scope Cover - (BNIB. Taken out for the pics.) - $10 shipped

PM me first to avoid scammers. I will not PM you.

Accepting PayPal FF, Zelle only.

Will ship out first thing next biz day.

Selling my 4DOF Kestrel, moving away from the Kestrel in general. $340 shipped with case

Selling some extra ammo I don’t need.
$150tyd for 5 boxes or $275 for all 10 SOLD

I am selling this for a friend. She is the one that sent it in to me to review.

Review - Login to view embedded media
Photos - Below

Model number - D10SV24FDIMLX

Price - Asking for $2450 shipped. Very light salt and comes with the Badger mount, box, documents. Does not include the red dot.

Trades - + cash NF NX8 2.5-20x50 mil-xt, color doesn't matter

To quote her about her thoughts with this scope;

"I want to say I really REALLY like my March FX 34mm 1-10x Shorty--I fucking love it, even. I remember buying this thing to replace my ATACR, and I never looked back...but I'm selling it. I'm getting a 6.5 CM soon and 10x isn't cutting it. I have no use for it now.
I will say that March is one of those "if you know, you know" brands, and a lot of people aren't familiar with them. Here are two very detailed comparison videos to let you form an opinion, each with different stances on this particular optic:"

Please let me know if you have any questions. If I need to submit my own timestamp, please let me know.

Posting my lightly used Burris XTR Pro 5.5-30x56 scope. It’s been to the range just a few times and looks and functions like new. Has the tremor 5 mil reticle and throw lever.

$1200