Login to view embedded media
So the governor of NJ did t want a journalist at his church service political endorsement rally so he ordered the pigs to remove the man - which they did cause what else would they do ?



Login to view embedded media
This guy had an epileptic seizure- which of course caused pigs to beat taz and arrest him - cause what else would they do ?

Hope everyone enjoyed the double feature of the finest and bravest of hero’s serving their community!

Lonestar LT-5 Rotary Brass Shell Case Tumbler Polisher Reloading with 20lb SS (chips) Media included.

Brand: Lonestar
Type: Reloading Brass Tumbler
Model: LT-5
Country of Manufacture: United States
Dimensions: 19" L x 14" W x 16.5" H

Features:

• Large 60w motor
• Wet or Dry use
• 40lb maximum weight capacity
• 5.25-gallon fluid capacity
• Stainless drum hardware
• Largemouth for easy loading/unloading 4 inches
• Tools for drum removal
• Tumble, Polish and Clean
• Holds up to 500 cases of 300 Win Mag or 900+ of 6m Dasher

Includes:
Base motor unit
One tub & 2 lid assemblies: One lid that seals, one lid that has an adapter and drain holes for flushing water through while it’s running.
Approximate 20lb Stainless Steel chips for cleaning media

Conditions: Excellent working condition; it appears to be lightly used. This thing will last for ever!

Price & Terms: $400
No trades, please. 5% Discount for Cash.
Local face-to-face transfer can be arranged (S Denver CO). Buyer pays shipping
Message me (Lou) for details.
If you’re a serious buyer, send me your address and I’ll try to get a shipping estimate.

LNIB 300 Norma Mag Dies

• Redding Type S Elite Neck Bushing style FL sizing die
• Two (2) neck bushings included: please specify which two diameter neck bushings you want included
• Redding Type S Elite Neck Bushing style Neck Sizing (only) die
• Micron Precision Series ultra precise fine thread micrometer adjustment bullet seating die, with seating stem for Berger 245 LRHT and Hornady 230/250 A-TIP bullets

WTT My Curved Larue for your Flat. Must be new or near new.

Short version woman comedian implies two dudes are fudgpackers (seems they weren’t) they heckle her back but better and she goes batshit.

Login to view embedded media

Decided to split up this package, but overall great lightweight setup. I have not shot this rifle to validate grouping, but was told it was from a high end smith out in UT and that it was a proof stainless blank that was used in the build.

Lone Peak Fuzion Action
Triggertech Field Trigger
Mesa Precision Stock- overall great condition with only mark I could find is on right side right above trigger (see pics)
26” Diamond Fluted, Stainless Barrel with blended thread protector
SARV Stalker M5 Bottom Metal/Mag
Rifle weight: 7lb 5.6oz on my kitchen/mail scale

Asking 2300 Shipped/Insured to your FFL;

Note this is also posted on longrsngehunting.com.

New
$75 shipped

Shipped
Buttstock part is painted gap camouflage

What is the difference between Federal Premium .308 GMM with 175 gr. SMK and the Federal Premium 7.62.51 mm with the 175 gr. SMK loads?

Thanks

Hey guys,

I've got some basic questions that my google fu is weak on. I'm just going to go ahead and list my questions in no particular order. Any help would be appreciated. These questions are only applicable to Thermal as that is what I am interested in.

1. Do you need an illuminated reticle to use with a clip on? I'm a little confused as to how visible the reticle will be without illumination overlaid on a digital screen.

2. Obviously this is clip on dependent and seemingly subjective but how much low end magnification can you get away with using a clip on? I was hoping to be able to use a Mk5 3.6-18. I'd rather not buy an LPVO if I can avoid it. By the same token, if say my optic is 3.6 on the low end, will this be similar to listed native magnifications on thermal scopes, ie "base mag of 2X". Would 3.6 effectively be my "base mag"?

3. To the best of my understanding, there are only a few commercial grade clip ons that supposedly don't require collimation. The Sig offering and I believe the new Armasight clip on. Am I missing any?

4. RE: Zeroing profiles and collimation. Lets say you have four guns and four zero profiles. Do you have to collimate the optic each time you place it onto a different platform and switch zero profiles or is that somehow saved within the zero profile?

I think that about covers my questions for now. If I think of anymore i'll add em!

Thanks guys!

Parting out a recent Rem 700 LA build on the 4.0 chassis, minus barrel, all prices are shipped, with action FFL to FFL. Setup had 100 shots at the range and most parts come with all original paperwork and packaging. Please DM for more details and pictures if interested in any of the below.

-Element 4.0 Magnesium Chassis for Rem700 LA 3.850 magwell size and clones, folding adapter with carbon buttstock and carbon grip $1150
-BAT Igniter LA, Mag Bolt Face with pic rail $1100
-Ti Pro 5, 5/8-24, .30 cal, charcoal cerakote, tapered to .900 magnum muzzle contour $175
-Accurate Mag, 300 WM, 3.850, 3rd & 5rd $80 each
-BAT action wrench $55
-Trigger Tech Rem700 Special, 2-stage, flat face $195
-Nightforce 30mm 6-screw, low .885 ring set $130
-Maven RS.3 Black/Grey, 5-30x50, SHR-MIL $750

I have a rugged surge 762. I really want to use for PRS. The suppressors that have a muzzle break end cap tend to work better for this kind of shooting. Does anyone know of a company that does custom end caps?

As the title says, I am curious what optics folks are enjoying and why? There are no wrong answers, be as specific or as vague as you like. It does not matter if you have a cardboard tube with toothpicks for a reticle, a $75 Walmart special or a $3000+ S&B.

I really enjoy this Leupold Mark 4 2.5-8 that has been mounted on my hunting rifle for years. The magnification range is perfect for Elk hunting in my corner of Washington and the scope just looks cool to me. I was able to get the optic for a great price when I was in the military and it has always been a performer. I removed the scope from the rifle(sent off for a new barrel install) and after 5 minutes with a scrubby pad and some 409 it looks nearly new.

It's finally time to clean out the die sets that are not getting used. Sets are depicted and described to the best of my knowledge. If bushings or shell holders are not shown, assume they are not included. Prices include shipping; contact me for a discount if you want multiple sets. Payment accepted via discreet PayPal.

Lee Deluxe 3-die set for .243 Win - $30


Lee Deluxe carbide 4-die set for .40 S&W/10mm (90965), new - $40


RCBS full-length two-die set for .260 Rem (12801), new - $30



RCBS neck two-die set for .338 Lapua Mag (16602), new - $30

WTS NIB Spuhr SP-4022 NIB. I'm just cleaning out the closet. It was never mounted.
Price - $375 shipped CONUSA
Trades - 375 H&H ammo
Payment - cash, PayPal / Venmo (you eat any fees)

I have a perfectly brand new Geissele Super Duty MOD1 14.5. Has never even had a round chambered in it. Will come with one 30 round pmag and every things else that comes in the box. $1600 shipped to your ffl.

We received four A4s last week, three rifles and one pistol. They all sold withing 24 hours of hitting the store and I bought one of the rifles as I am a hopeless HK fan and I freely admit it.

All I have done with the rifle is take it to the range and zero the optics and then shoot some at 100 yards. So the comments about the rifle, it feels at least a pound lighter than the MR556 and I think a lot of this is the thinner barrel profile. The handguard is made by HK and is thinner then the previous mlok version and lighter, definitely lighter then the quad pic rail. The lower is now full ambi and functions as advertised. The trigger is actually the same full auto you get with the 416, just no sear. The furniture is changed, lighter then before. You no longer need the butt stock tool to take down the rifle, just normal pins like any other AR.

From the factory, HK test every rifle sold and they leave with the following. 10 shots, 100 meters, 30mm group. They do not say if they shoot it out of a sled (I am assuming they do) but it is sub moa rifle with factory ammo if you do your part. Having said that, I did not do my part over 10 rounds three times. On every single group (I tried three times) shooting Winchester Lake City 62 grain, I pulled at least once. If we had been shooting 8 shot groups it would have been sub moa. Even pulling some shots, my worst group was 1.2 moa at 100 yards and best was 1.12 moa.

After looking at it, I am going to try again over Christmas with a setup that I think will get better accuracy. I am going to bring a couple of different ammos including 77 grain IMI Razorcore and 77 grain Blackhills and I will scrounge around for a third group. I am going to put an actual bipod on the rifle instead of resting it on my backpack and bring a rear bag. I am also going to go with a better/higher magnification scope to see if I can reproduce the factory claimed accuracy. Since I am talking about accuracy, I am going to repeat what the HK rep told us about the barrel. It is a blank sent over from Germany. It is not chrome lined. HK says that they can not find anyone to chrome line the barrels to the standards required. To that end, they are also saying that the chrome content of the barrel steel is higher then most US made barrels and that they have multiples of rifles that are still shooting sub moa past 12k rounds. To me, that is almost besides the point because HK has gone full SOLGW on us and they guarantee the barrel in writing. If you shoot it out and the groups open up, they will replace the barrel for life of the gun.


MAC I think he does a good job showing the changes from the 556 to the A4
This is a video from 9holes, they take it to the range and give their thoughts.

i have a BA 18” barrel that has a 158fps spread using a garmin xero. imi razor core from 2016 lot. i did 27 shots with:

2848fps high
2684fps low

can a shitty barrel do that? even his Douglas seems extreme and thats no shitty barrel.
garmin problem?
what other info do we need here?
i chrono’ed my buddys douglass barrel and his had a 95fps spread.
2837fps to 2742fps over only 5 shots.

I have an almost brand new Trigger Tech Diamond single stage I’d like to trade for a two stage diamond.

Let me know what ya got.

Anyone selling a AXSR sans scope (plenty of them laying around).

Hi All,
I recently decided to add the K&M arbor press to my reloading process with the Le Wilson dies.
Many K&M arbor press owners seem to want a longer handle.
Can anyone tell me where longer handles are made & sold ?
Thank you,
AJ

Huber Concepts 2 stage Rem700 Clone trigger. 1.5lbs brake. Sold

Hey boys,

I’ve hunted feral hogs at night with dual tube nods, ir lasers, and thermal optics. Hunting tactics are scouting and locating groups of hogs on large patches of farmland and get in close to engage.

I recently got a deal on a CNVD PVS-24; not the LR version. I’ve been using it with a LPVO, and really like the little clip on. Image starts diminishing past 6X, but from 2X-6X it’s FOV and image quality is nice!

The issue is, I’ve never used another clip on other than this one. Most everything I hunt at night is 200yds and in….I don’t really have a way at this time to range, make turret adjustments and engage distant targets….

That being said, am I missing a lot by not going with a PVS-22, PVS-30, or PVS-27 that accommodates more magnification?

Just like to get your thoughts on them compared to the PVS-24 for short to mid range dynamic night hunting.

Thanks for your time!

WTS MPA Matrix Chassis, SA (rem700/clone) has the enhanced NV Rail (I have grip tape on it now, but have the original pic rail), internal weight kit and a 3D printed bag rider. Chassis is in excellent condition, barely used. Comes with the original additional parts, handles, barricade stop, etc.

$1,000 Shipped
Zelle, PayPal F&F