Can it be fixed?!

This is a transferable, former movie gun, posted on GB. Seller (No affiliation and don't know) has 2 broken receivers for sale. EA receivers are cast, anyone know good AL welder, or would JB Weld work!! There are/were some Class 2's that have repaired forged receivers in the past but they are getting fewer and fewer.

Back in the day, John Norrell in Little Rock bought drums of de-milled M1-16 receivers and picked through them. machined, and welded 2 parts to create a transferable and he welded a bunch of receivers.
His welded receivers are hard to tell without a x-ray. Stemple is reported to have done some welded receivers also.

Hey y'all!

We have a DEMO Eotech Clip IR SR MK2 with the FTS mount up for grabs here at SOK. These are really cool and can be used as a clip on and stand alone sight. It's fully collimated and will take around 6x day scope mag comfortably. The Clip IR SR achieves a lot of the Voodoo S functionality for a lot less money. It's in like new condition, with 0 blems or issues, and it comes with the full 10 year warranty upon sale!
listing for $9,000.00 + tax Sold

Text, call, or email me if interested!
Tyler Martin
214-507-7208
[email protected]

I’m currently assembling a rifle for my daughter and I (she’s 9) it started off as a bergara b14r in a MPA BA comp chassis and I’ve been spotting her impacts more than I’ve been shooting lately lol. So the plan is to drop a 6.5 creedmoor barreled action into the chassis and extend our ranges a bit.

-Gun Details - Will be a competition contour 6.5 creed 26”, MPA BA chassis, big horn orgin action etc. I want it 20lbs+ so she is extremely comfortable behind it.

-Shooting style - We don’t compete we just shoot for fun. I want the 6.5 CM to be a 1000 yard and in gun for her and my plans is to later have a 7ss, 7saum barrel spun up and stretch out to a mile.

-Conditions - We shoot no matter rain or shine but the optic must be good in low light as this will serve as a deer hunting gun as well (we shoot from a bench and tripods) we rarely walk over 100 yards to a stand so a heavy gun will not be a problem.

-Specifications needed - Needs to be FFP and in mils other than that the heavier the better. Considering the 7-35 magnification range this go around.


My experience with good quality glass is a leupold Mark 5 5-25x56 and a few lower end Night force scopes. The mark 5 does everything well so I would like a scope at least on par with it or a slight step up.

SOLD (with price intentionally left so others can gauge the market)


Ckye-pod Triple pull gen 2

New in box, opened just for photo.


800 shipped to your lower 48 door, PP/FF








SOLD

Black Badger C1 Max 1.54” 0 MOA. Switched to a lighter mount for NRL Hunter so this has been sitting.

$260 shipped. Zelle, Venmo, or PayPal F&F.

Selling my SS DR920P
Has a Holosun 407A3 red dot with all the factory optic spacers from Shadow Systems
Factory comp’d gun that shoots fantastic. I just prefer my glock 17 and my Stacatto so letting this one go.
Come with 2 17rnd “factory” magpul mags
Asking $1,000 shipped, or may trade for something interesting.

Hi everyone. I have a turnkey, gorgeous Spotter 45 setup up for sale. This is a complete package, I'm not wanting to disassemble it. It was purchased new, by me, from EO (who also handles any service requests for them) and has only been used a handful of times. Otherwise it's just sat dormant in my smoke-free house on a shelf. I just am not putting it to use so it's ready for it's next owner who will be really able to use it to its full potential. I don't think there's much I need to say about these, they're the best of the best when it comes to tactical spotters and I believe they're discontinued for distribution in the U.S. so they can be tricky to get your hands on one stateside.

Package includes:

• Hensoldt Spotter 45 / Tan / Horus 32 - $4330 + tax retail (have receipt)
• Triad Tactical Spotter 45 cover in Multicam - $84
• Badger Ordnance S.L.I.C.K.-H - $1300
• Badger Ordnance S.L.I.C.K.-H "Catseye" cover - $185
• Badger Ordnance S.L.I.C.K. Adapter Plate (RMR) - $50
• Trijicon RMR HRS - $550

Total Retail before tax and shipping: $6499

Asking $6k + shipping.

I have a BNIB ARC Air Brace scope mount. 30mm rings, 1.5" high, cantilevered and 20 MOA. This was just released late last year and never used.


$315 shipped.

paypal, venmo or zelle

I have 3,500 153 A-Tips, all one lot number, in bulk packaging. 3,000 of them are unopened and sealed.

I also have five 100 count boxes all sealed together from the factory.

Asking $0.70 per bullet. Open to offers. Want to move.

Never used. Boxes have been opened by myself. More pics available on request. $200 additional if you want the Hawkins rings, 1.15 inch height.

Got a new Rem 700 Long Range in 308. Really liking the gun so far, but I'm having issues with some rounds not firing. Been searching a lot, but I can't find good info on where to start fixing/how to diagnose what exactly is the problem.

Happens with factory AAC 175, 168 and Winchester M80 LC brass
Averaging 2-3+ fail to fire per box of 20
Already removed and cleaned the firing pin/spring assembly
Loaded the rounds that didn't go off 2-3 times and they still didn't fire

Fail to fire on top, fired rounds on bottom. Maybe some flattening and slight cratering?




Bolt face has brass marks and what appears to be slight brass shavings?



I'm wondering if the brass shavings are simply getting into the firing pin and impeding it's travel, or if I have some other issue like bad firing pin dimesions or over pressure or headspace.

Do I just buy a new firing pin or spring or see if Rem will send me another bolt assembly?

Thanks for any help. Here is the gun:

$SOLD TYD via Venmo/PayPal. Ships USPS with tracking.

Selling my LPR 300. Received rifle last September. Rifle is accurate as expected with any of Lane’s builds. Documented 369 rounds fired. Gently cleaned every 50 rounds.

215s at 2700 (Very mild, super accurate).
208 ELD-Ms at 2840 (Not max)

Specs:
-Lane Precision branded Defiance Anti action
-Nitrided bolt
-Hollow teardrop bolt handle
-Triggertech Special Pro single stage at 1.5lbs
-22” Spiral fluted Bartlien 3b, 9 twist
-McMillan Hunters Edge Sendero stock
-HS Precision bottom metal
-Tungsten Cerakote on metal
-Coyote tan flutes, stock and details

Included with rifle:
-Defiance 20 MOA rail
-Talley 0 MOA rail (currently on rifle)
-Talley 30mm High rings
-30mm scope level

Suppressor, scope and Spuhr rings not included.

Buyer has first right of refusal for the following:

-283 New, fully prepped Norma
-49 1x fired Norma
-50 6x fired Norma
-200 brand new Norma
-Complete die set

• Forster Ultra Micrometer seater
• Lee collet neck die
• Lee factory crimp die
• Full length small base body die
• Forster FL sizer
• LE Wilson micrometer arbor seater

-Rifle only $4600
-Rifle and all reloading components $5500

Prices may have been to high
Rifle only $3800
Rifle and all components $4500

I’m looking at spotting scopes and need some user input. For my use, they may not even be feasible. So here is my situation. I’m wanting a system that would allow me to see 6.5 hits at 550+. My shooting is off a bench or a rest and would not be used in the field or for hunting. I’m looking at the Swaro ATX 85 and the Kowa TAN-88. Would these be capable of picking up 6.5 holes at the ranges I’m looking for? If so, can you actual users give me your thoughts on the two mentioned. I’ve visited with the folks at Cameraland and they are very high on both. What say you guys? Thanks any input you can give me.

These are perfect for NRL, only 8 round mags I’ve found. They are Accurate Mag with Ruger’s logo on the bottom. Never had a single issue with any of them, just moving down to 6.5CM.

$SOLD TYD for all 3. Ships USPS with tracking.

Really right stuff tripod 22ic compact
750 with out chaps
800 with chaps
Tripod only no head
Slightly used but in very good condition

I've got a few extra magazines up for grabs. All mags are short action, AICS pattern.

1. Accurate Mag - 308 - 5rd: $60 $50 SOLD
2. Accurate Mag - 308 - 5rd: $50 $40 SOLD
3. Accurate Mag - 308 - 5rd: $60 $50 SOLD
4. Accurate Mag - 300 WSM - 3rd: $60 SOLD
5. Accurate Mag - 300 WSM - 7rd: $60 SOLD
6. Accurate Mag - 308 - 10rd + Area 419 extension: $90 $75 $50 SOLD
7. Accurate Mag - 308 - 10rd + Area 419 extension: $90 $75 $50 SOLD

Mags #6 and #7 have some super bougie laser engraving on them. Compliments of a less mature & refined Rex.







Prices are SHIPPED CONUS. Insurance over $100 is on you, in the unlikely event that you want it. Otherwise, the mags are yours once scanned at the carrier.

First "I'll take it" in the comments trumps pending offers via PM.

Hello folks,

New guy here, live in the greater Boston area. Just starting to get my feet wet with Long Range and excited to learn from the content here.

I have just one AR so far (MCX 16") and my plan is to pick up an LRP-07 shortly to get into longer range precision shooting. If you are in the greater Boston area, send a shotout, i'd love to talk shop with folks more knowledgeable (or hell, evein the same boat) as me!

Looking to fund another project. This has 40 rounds on it. I have an additional barrel that is identical and can be included.

Spartan Rifles (Bartlein) - 6mm GT barrel

• 1:7.5 twist
• Original contour: 1.250" for 5" then straight taper to 1.000" at 28"
• Finished at 27"
• 5/8x24 muzzle threads

$6500 shipped without the extra barrel and brake and bipod
$7300 shipped with both barrels

Wilson case trimmer (sku 487924)
Wilson case trimmer holder for 222 and 223 Rem (sku 340243)
Wilson case trimmer power adapter (sku 315672)
Sinclair trimmer bracket with shark fin (sku 05-495)
$85 shipped

When running ARs in -10 & below temperatures what brands of lubricants work best?

Are there any AGBs that work better than others in those temperatures?

$200 Shipped

Currently on my phone and website works perfect. I cannot for the life of me get it to work on the desktop site. Every time I try to login I get this screen. Does anyone know a fix? I have tried chrome and edge browsers and neither one will work. Thanks!

I looked through a lot of the “Making 22 ARC” brass threads that I could find before posting this question. So if I missed this thread I do apologize.

I’m looking at building a 22 ARC AR rifle for coyotes hunting, and I want to run Lapua brass. I know Lapua makes 6.5 Grendel brass, and I want to use the 22 ARC Modular Sizing Die from Short Action Custom.

So my question is can I just run the Lapua brass into the SAC 22 ARC sizing die, with the appropriate neck bushing, and I am good to go? One of the guys at SAC said their die is not intended to form the body of the case, and to the best of my knowledge from reading posts, the 22 ARC has the same dimensions as the 6.5 Grendel other than being necked down.

Second, has anyone had to neck turn after necking down to a 22 ARC?

Not a lot of solid data here, a search turns up some contentious opinions but not good data.

Will be loading 407 Berger solids in the 375, and 300 jacketed Bergers in the 338, Petersen brass. Would appreciate hearing from those who have been there. PM me if you are uncomfortable posting loads. Cheers.