Jagewerks A-1 mount and diving board both .875 height, $135 shipped

I currently am getting a FN spr a5m, Wondering what improvements can be made to squeeze every ounce of accuracy out of this fine rifle.

And if you have any recommendations for the work please let me know.

All brand new. Never loaded a round. Bought a lot of reloading stuff from a friend who never used it and selling the stuff I’ll never use.

Hornady 6mm arc match grade die set with micrometer seater-$70

Hornady 6mm arc seater die #044244 - $40

Hornady 6mm arc match grade full size die #046264 -$40

Hornady cartridge gauge and modified case for 6mm arc-$20

Buy all of it for $150 shipped to your door. Prefer PP F&F.

I had a DMR II PRO that had been lightly used since I bought it new. On the last two outings I noticed that the reticle seemed to be out of plumb. I readjusted it and took it out again. Again it got out of plumb while shooting. I sent it to Bushnell for inspection on 7/31/24. On 8/13 I received an email stating that it was indeed defective and I was to receive a new scope. On 9/5 I sent an email to customer service asking for the status of my replacement. I have yet to receive a reply. On 9/9 I called the customer service number during Bushnell's posted business hours and got a recording stating that "due to a large call volume and backlog the queue was closed. Call back later." I called back later that day but during posted business hours and got the same recording. On 9/10 I called during posted business hours and got a recording "You have called after business hours. Please call back later." On 9/11 I called during business hours and got the same recording as on 9/9. The same happened on 9/12 (today).
To summarize, after five calls in four days during Bushnell's regular business hours and one email, I cannot make contact. My conclusion is that either Bushnell has serious technical problems with their communication system and they are not interested in resolving them so as to allow contact with their customers or they have such poor products that they do not want to have contact with their customers. If the latter is true then it will not be long before the problem resolves itself because they will not have many customers to deal with.
If any of you reading this post have any suggestions as to how to get resolution to this problem or have any real insight as to why this problem exists, I would appreciate hearing from you. As of now I have decided not purchase any more Bushnell products. I guess after having outstanding customer support from Vortex, Night Force and Léopold, I have been spoiled.

Used but works fine. Bought a lot of reloading stuff from a friend. Not even sure how much he used this thing, it’s sat around most its life.
I know for sure I don’t need it.
$50 plus shipping as shipping will likely add 15-20$

Prefer PayPal f&F.

Sold to @bkglock

Mpa made dloc mount for harris bipod. Converts it to a picatinny mount. I originally bought it bc I thought it was for arca. Will include a free additional adapter that I think was made by knights

$35 shipped

I bought a bunch of reloading equipment from a friend that bought it all last year but never used it. Selling the stuff I’ll never use.

Brand new K&M arbor press
22CM Lewilson seater with vld stem and std
6CM lewilson seater with vld stem and std

I’d like to sell this all together, pricing it relatively cheap to reflect it selling as a lot.

Call or text or pm me. Prefer PP as F&F
$315 OBO shipped anywhere in the US.

Sold to @Beefmanne

Hi there - if you have experience using t-tracks on reloading bench, can you share your experience? Pros, cons, learnings, suggestions...I plan to have a 168 inch long reloading bench and looking for ideas on how best to equip it...I have almost everything related to reloading on the desk with focus on reloading for light and heavy ELR matches...thanks

Mpa matrix pro 2. Rem 700 short action Brand new in box never even had an action mount in it. 1250 shipped.

New in box Geissele Super Precision DDC 30mm mount part #05-329S

$300 shipped to your door

USPS money order or discreet electronic forms of payment accepted.

IM/email for any questions

Fellas!

Recieved my SPR back from 2 very good companies. LRI did bolt knob work and cerakoted to match awesome job, and LTM did the digital camo stellar work highly recommend these 2 for any gunsmith work or custom painting!

Ltm 816-401-6914 located in kingsville/ Joe Larson


LRI
(605) 490-2561 located in Sturgis, SD

SPF-Proof Research Competition Contour pre fit for Terminus Zues QC. 15 rounds total on it. Some minor scratches (shown) so selling it for $425 shipped. Brake not included.

SOLD-MDT Poly 10 rnd mags

SOLD-Terminus Zues QC LH bolt

Shipping to lower 48 states only.

PayPal Friends and Family or you pick up fees.

Selling a very nice piece of American military history. I purchased it ~4 years ago from a private owner who was a relative of the soldier that the rifle belonged to during WW2. Its current configuration/shape is the same as it was when it was brought back from the war. I’m only selling because I have multiple of these rifles and was lucky enough to have just purchased an A4 sniper model, so just hoping to recoup some funds.

The overall condition of the rifle is very good. The stock is excellent, with no major defects in the wood and has a very prominent “RA-P” cartouche stamp on the left side.

The parkerized finish on the receiver is very good, with only slight signs of wear.

The bluing on the bolt/bolt parts, the barrel, and bayonet lug, is good-very good. Typically signs of light wear on the bolt and bolt handle. The muzzle end of the barrel, and crown, do have some slight-moderate fading of the blue, but is still evident.

All mechanical parts function as they should (the rear sights, the bolt, the magazine, and the trigger). The bore is very bright with no signs of pitting or rust. The rifling does show signs of use, but is still very evident. I have shot this rifle 2 or 3 times, and it shoots remarkably well for its age.

The serial number on the receiver dates its manufacture to June of 1943; which also suggests that the current stock is original to the receiver because of the cartouche stamp “RA-P”, indicating inspector Peterson of the Raritan Arsenal, who was the chief inspector from 1942-1946.

The barrel is stamped RA 8-44.

I’m sure I missed something, so please feel free to reach out with any questions!

Asking $1200 shipped to FFL

Bison armory 11.5” barrel and JP bolt
Less than 200 rounds on this one

$150 with bolt

Looking to buy one if anyone is selling one.

Looking for a McMillan HTG for Rem 700 Long Action and MTU or similar contour.

Bottom metal doesn't matter.

I have a Browning T-bolt Varmint Special that I shot one time and it has sat since.
I see it was a limited edition and just wondering what is a fair price to ask?

Have original box, paper work, etc.

It's the stainless model in 17 HMR

Thanks

Hey all, looking to upgrade a Tikka. Want to re-barrel to a different caliber and a few other customizations. Any recommendations on a smith who specializes in Tikkas or works a lot with them? Anywhere in the country is fine. Thanks.

This light is in near perfect condition and functions perfectly. Price is 215 shipped, buyer covers fees.

Hello all, I have been using a Vortex Strike Eagle 5x25x56 the past two years with some great results out to 850. However, recently I have been practicing dialing in more at various distance, and it seems my scope tracking isn’t that great. Then of course the little things are beginning to irritate me. That said, I think I might be ready to appreciate an upgrade.

Kahles and ZCO both appear to have many positives. ZCO might have a slightly better customer service program in the states.

I’m leaning towards the k540i DLR, but that might just be overkill for me at this point. Not to mention that the k328i DLR is already in the wild.

ZCO 840 has a lower multiplier, I’m guessing that means that higher zoom will be clearer.

Anyway, I need some help trying to get a grip on expectations. For all with more experience than me, what would you do if you were at two years into long range with longest distance being 850 yards?

18" carbon , about 10rds fired

$875 shipped

Selling my TiN CHAD Muzzle brake serial number 4.

Few dings on the tuner from matches and scratches on the lock nut. Nothing wrong with it past that, just moving to a CHAD without a tuner.

$450 shipped

Original BadRock Rifle with the Defiance controlled round feed, TriggerTech Special trigger, KRG Bravo Chassis w/ a Whiskey-3 Polymer Forend, and it comes with a 9.5" KRG Arca Rail and 13.7" XL KRG Arca Rail. Round count is <200 rounds. Used for promotional purposes and a couple demos on the range. I only accept Zelle or cash, and price includes shipping CONUS. SOLD

Partial trades I'm interested in are various Aimpoints, Surefire pistol lights, Peltor Comtac headset, Wilcox L4 NVG Mount, Ruger Mark IV Tactical, or HK USP.

RRS 22i Compact, legs were wrapped up right away and only used a handful of
times.
$825 shipped (buyer pays insurance if you want it)

Payment PayPal FF or you pay the fees for G&S

PM if interested