I have two brand new takeoff barrels which are complete with front sights, muzzle brake, etc. Neither has been fired and both were purchased on brand new, complete rifles, by me. $575 shipped insured per barrel. Thank you

Harris bipod 6-9 inch

Area 419 adapter for arca clamps

Kmw lever.

$125 shipped

I have 50 pieces of Peterson brass in 300 Win Mag Long for sale. These are 1x fired and ready to load.

If you are unfamiliar with the “long” version feel free to read up on it - but the TLDR is that these have a slightly longer length-to-shoulder dimension to negate the typical case stretch and early case-head separation that the 300 Win Mag suffers from. These WILL work in any standard 300 Win Mag chamber. Great brass but I no longer have a 300 Win Mag.

Asking $55 shipped, PayPal f&f or Zelle.

I’m not sure why but I was under the impression that reloader 16 was temp stable. I’m shooting it in a 6.5 Creedmoor and I lost 75 FPS from 100°F to 55°F today. I know that even the temp stable powders lose a little bit, but in my opinion, that’s pretty drastic what say ye sniper hide?

Carbine to carbine interface. Works well on and AR buffer tube chassis like MDT, XLR, Ultradyne, S2Delta, Sharps Bros, Falkor, and so on.

$125 shipped

Timber creek outdoors robins egg blue

Timber creek scope mount
2 9 slot picatinny raila
BAD lever
Ambi safety

New no marks

250 shipped
I gave 199 for the mount alone.

Pistol is a CZ shadow 2. I''ve had it for maybe a year. I doubt it has more than 500 rounds through it. I decided to clean it today and I noticed this chip inside the slide. It functions fine, I shot it yesterday. I'm just trying to figure out what the chip is from.

3- leupold mark 5 5-25x56 pr-1 reticle. All glass is excellent as is scope bodies. Very slight marks at the most. One is in Spuhr sp5001 mount. $2000. Next is in Hawkins heavy tactical one piece mount with diving board and level. $1900. Last (I believe) is Hawkins ultra lite tactical 1” high rings with offset level top ring. $1750. I only have two sun shades so those will go to whoever wants them first. I would sell bare scopes for $1600. Would also sell mounts separate if wanted. Just reach out prices are shipped conus with PayPal f&f.

Looking for a 6.5mm Wilson mandrel.

Probably been answered. Probably is opinion. But u noticed the 4-20 say on the bottom "designed, assembled in usa with usa and global componets" or something along those lines.

The 7-35 just says "made in japan". If this were 1970 I'd say hands down the 4-20 is better. Now a days I'm guessing most will say same quality? What do the others say? 4-16 and 5-25?

All prices are without shipping.
Pricing everything to move quickly so prices are firm unless you buy multiple items.

Public "I'll take it" gets priority over private messages.

Venmo, Cash App or MO only please


ALL SOLD!


(3) Dead Air Keymo Muzzle Brake 5/8x24
$50/Each. (2) SOLD, (1) remaining.

(1) Dead Air Keymo Muzzle Brake 1/2x28 $50 SOLD

(1) Badger Ordnance FTE Muzzle Brake 5/8x24 $50 SOLD

(1 )Cortina Precision NextGen EC Tuner Brake (6.5) $175 SOLD

(1) New Precision Armament EFAB 1/2x28
$95 $85

(1) Lantac Keymo Dragon Muzzle Brake $75 SOLD

TriggerTech Duty 3.5lb Single stage
$65 SOLD

TriggerTech competitive fixed 3lb Single Stage. $120 SOLD

Magneto speed V3 $ 115 SOLD

New Black Larue RAT Stock and A-Peg Grip combo $90

New SB Tactical SBA5 Brace $70 SOLD

New Rosco K9 11.5" $95 $87 SOLD

For sale is a like new BOBRO 35MM Single Lever Mount, perfect for Leupold MK5's

SOLD

Venmo, Cash App or Money Order ONLY
Please.

I'm in DFW near Lake Highlands. Just getting into PRS, was curious if there was a group who train together or anything. I've been up to Fossil Pointe a couple times but looking to join up and maybe pick up some pointers to start getting ready for next year's season.

Thanks.

Black Rain Ordnance Derecho Action.
Short Action 308 bolt face $1200

Precision 3-LUG RECEIVER with 60° bolt throw

• Receiver is made of pre-hardened 4140 ALLOY STEEL
• Integrated .300” recoil lug
• Integrated 20 MOA Picatinny Rail
• Raceways are electric discharge machined
• Bolt machined from one-piece, hardened 4140 ALLOY STEEL
• Receiver & Bolt assembly are PVD Titankote C12 Me-DLC treated Color – (Black)
• +/- .001’’ headspace tolerance allows pre-fit barrels
• Receiver threads are 1.0625” x 16 T.P.I.
• Cantilever style bolt stop provides strength and does not require stock modification
• Remington 700 footprint allows interface with standard stocks and chassis systems
• Accepts REMINGTON STYLE TRIGGERS
• Mini M-16 Extractor
• .062″ Diameter STAINLESS STEEL Firing Pin
• Roller-Bearing Tipped Cocking Piece for effortless operation
• Accepts AI and AW style magazine systems depending on model
• Available in – .308 and Mag bolt configurations
• Receiver Weight: 1lb 5.7oz
• Bolt Weight: 13.4oz
• Total Weight: 2lbs 3.1oz

Trades:
*Manners TCS and similar stocks
*RRS Tripod

Selling my brand new EOTECH EFLX 6moa red dot. Brand new. $210 shipped to lower 48. PPFF.

Ordered this thing in November for a build and it finally showed up. Don't need it anymore.

Solus right hand short action PVD FDE finish. Standard bolt face for 308, 6.5CM, etc. Brand new condition.

$650 shipped to your FFL.

My PP is locked up right now.

Will accept Venmo gift or zelle.

Hey all. New here just getting into long range shooting with both 22lr and 6.5 CM
I currently have a CZ 457 with 20" MTR barrel that I'm putting together along with
a MPA Matrix 2 Pro in 6.5 creedmore.

First up, Spuhr 4002 34mm 0 MOA mount with extra screws, leveler, and box. $375 shipped lower 48

Second, 1 Impact precision prefit barrel from Stuteville. 6CM M24 contour 5/8x24 26 inches, 650 total rounds on barrel. Was used in 5 matches, $500 shipped

3rd, Exodus barrel, M24 contour, 26 inches 5/8x24 800 rounds on barrel (this was bought as a spare from a friend and never used) $500 shipped

6.5 Creedmoor Redding Type S Match Bushing Full Die Set $120 with 290 bushing​

Have two sets of the 6.5 available

REDDING 243 WINCHESTER TYPE S FULL BUSHING DIE $sold​

REDDING 204 Ruger TYPE S match DIE set $90​

I've got 2lbs of rl 17 one is unopened the other is opened but only a little missing. Pictures won't load but can send pics on scale. One is 1lb 2.6oz the other is 1lb 1.8oz

$90 will not ship

I guess this is a general question, but it involves a rimfire, so here I am.

I got myself a new T1x, and I am testing types of ammunition at short range. I am zeroing at 35 yards, and I will be moving out to 50 yards once I have favorites. The final goal is to kill squirrels.

I shot several types of ammo the other day at 35, and while an Eley product came in with the smallest groups (0.468"), cheap CCI Blazers shot prettier groups (0.555"). Each group was one nice round hole. The Eley groups were irregular.

Should a shooter conclude anything from the fact that one brand of ammunition shoots nice, round, symmetrical groups?

I was pretty surprised by the Blazers. I also shot CCI Sub-Sonics, and I got a nasty flyer I'm pretty sure I didn't cause.

Area 419 Headapace and Ogive Kit

Most precise and consistent way to measure

Comes with Stand

Brand new, hasn’t been used (was a gift to me) , just opened to take photos

I already own Hornady and SAC kits

SOLD shipped

(This is not a sales thread, I'm asking for info) I'm parting with a long and short action chassis and after looking online, I can't find a price to advertise them in here for. One has been sitting in it's box for a year (LA), and the other (SA) has been babied and well cared for.

Any ideas?

IRay Rico Hybrid 75 HYH75W

Purchased 02/24
4+ years of warranty left
LR1000 Range Finder included
Extra battery included

Comes with everything pictured. Free to video chat with anybody as needed. References available.

Wire transfer or PayPal F&F preferred

$6,900 OBO

Selling my ACC Premier Gen 1 chassis. It’s the sky blue cerakote version. Right Hand Remington 700 short action.

It’s been used for a couple seasons, so not perfect cosmetically. Some normal scuffs and wear and tear in the mag well, arca rail, and bag rider/butt stock. No issues that would cause any issues functionally though.

Chassis comes with grip, buttstock, like green dampeners, bag rider, 1 set of non-QD MDT external weights, and mirage shield.

Internal weights not included.

Asking $900 shipped PayPal F&F. If G&S buyer covers the fee.