I currently have a bergara premier in 300wm and I put it in a AG composite stock . It’s a good 1/2-3/4 moa gun but with a 26” barrel and gen 3 razor it’s ridiculously heavy . I saw where I could buy a barreled defiance action for a reasonable price , and was wondering if I threw that into a AG stock would I have to get it bedded or sent to a gunsmith to make it work ?

Pst gen2 with 30moa base. Used. One small chip pictured. Clear glass. 500 obo

Let's see your ghillie and maybe a description of how you made it.

New From Athlon for 2025

With the turn of the calendar comes a new year, SHOT Show and apparently many great new products from Athlon.

They have revamped 4 scope lines with easier to grip shorter/wider turret knobs, improved coatings, built-in throw levers, included flip caps and sunshades. These changes are on the new Ares ETR GEN2, Ares BTR GEN3 & the Midas Tac GEN2. The Argos BTR GEN3's have all of this as well as the relocation of the illumination knob off of the eyepiece and on the end of the elevation turret.

They have also revamped and added to their line of Thermal Riflescopes and Clip-On's

When the sun sets, dominate the night with the Crunus ATS Thermal Clip-On. Seize every available opportunity in the field with an extraordinary detection range and a lag-free clear display. On-board video recording and through the connected APP ensures you will capture every exhilarating moment of you hunt.

If you prefer a Thermal Riflescope to a Clip-On then check out their new Cronus ATS Pro Thermal Riflescopes
BALLISTICS CALCULATOR - Powered by Athlon's Ballistics App, providing accurate data for common calibers and cartridges, as well as custom loads.

All of these Thermals feature:
CUTTING-EDGE THERMAL SENSOR - Cronus ATS thermal optics feature incredibly low NETD ratings, allowing for extreme detail without the noise. Sensors with low NETD values can more precisely register small temperature differences.
LONG BATTERY LIFE - Athlon thermal scope provides more than 10 hours of use in most hunting situations with the standard battery set. A common USB-C connection also provides the ability to power the optic with an external battery pack if needed.
OLED DISPLAY - Impressive crystal-clear display provides exceptional detail with user adjustable functions.
AUTO-SHOT - Upon recoil detection, Athlon thermal scopes can automatically record the moments before and after you take the shot.
MAX DETECTION - Cronus ATS systems provided an extended detection range beyond your typical hunting distances.
ECO MODE - During long sits, conserve battery-life without impeding your hunt.
WIFI CONNECTION - Cronus ATS optics easily pair to the Athlon Thermal app to provide an alternative interface to control your thermal optic. Recording, video and photo management can also be accessed through this intuitive app!

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

For sale Manners PRS TCS Competition stock. GAP Camo. Mini chassis. RH. Short action. Adjustable cheek piece. Weight tunable butt stock. Flush cups on both R & L sides/front and back, as well as bottom of stock. MCS Steel Arca rail with 3 out of 5 weights. Extra butt stock weights and spacers for length of pull. Price $1300 shipped TYD.

I have a barely used PLRF-25C that has prob 10-15 minutes of use on it, always kept in the nylon case. Perfect for ELR range finding as I have personally gotten this out to 7400 yards on a stop sign on the side of the highway. Comes with the original box, all cables for hooking to PLGR/ DAGR if you happen to have those items, plus cables for hooking to laptop all shown in pics. This does not have Bluetooth.

Looking to trade for a high end spec WP PVS-14

Hawkins M5 Obendorf Long Action Bottom Metal with 300 PRC Wyatt’s Box & follower in very good condition.
Will come with new fasteners from Hawkins.



New these together are ~$275 + shipping.

$225 shipped in the CONUS.

I’m asking as i do not own any 6mm rifles yet but wanted to ask whether the benefit is worth the trouble.

Yes all pros could probably beat us all with a .50cal but am just curious as to how much of a disadvantage 6.5mm is.

Selling my used B&T SPC9 PDW, comes with 3x 30rd mags, it comes with the telescoping stock assembly with upgraded buttpad as well as the assembly that allows you to run any style of AR brace/stock (which was actually kind of a pain in the ass to get from B&T)
It has a Die Free Co. grip instead of the stock one.

Round count is sub 1k, shoots well, recoil is light and it does run the KCI metal lip mags perfectly as well.

I also have the SQD compact 9mm suppressor on a form 3 (I'm the dealer) if you want it as a package deal.

If you have any questions feel free to ask.

Asking
$1700 shipped for the pistol with mags and spare tele stock.

Selling a like-new 300 BO upper. 6" Faxon barrel with 5" twist. Vltor Mur 1 upper receiver. Young National Match BCG. Midwest 4.5" rail. BCG and gas block assembly. Ready to install on your lower. Oss brake not included. $480.00 shipped.

Selling a Glock 43x in excellent condition. Comes with Trijicon HD night sites. I think the trigger is OverWatch. 3 Shield Arms 15 round mags. $400 shipped.

I have three Aimpoint T2 mounts for sale. All are used but excellent condition

$90 each shipped in the lower 48
PayPal friends and family

Lower 1/3 mount sold

For Christmas I inherited a 1977 Ruger New Model Blackhawk in .357 Mag from my Uncle. I’m a novice when it comes to wheelguns but I’ve always wanted a revolver in .357 so I was proud to be bequeathed his pistola. He had big mits and the grips reflect that so I’m going to get some stock Ruger grips so it fits my hand better and start holster shopping.

There’s some surface rust that needs to be addressed so I’m going to tear the pistol down this weekend and clean it up.

I want a traditional leather holster for this rig but I don’t have deep pockets for a custom job. Are TripleK holsters decent?

SOLD!

Had this scope for many years. Functions great. Would be an awesome starter scope for someone as it was for me.

This is I believe the first gen of the XRS series, comes with Horus H59 reticle. Including the throw lever.

700 shipped. Make an offer. Trades for 737r barrels, Kestrel... would be considered.

Hi everyone, my 10 year old son got a 3d printer recently and we have been busy learning how to make cool stuff. He has an entrepreneurial spirit and wants to offer up some of the designs we came up with. My son is printing, and shipping. All of the money goes to him, I am simply the middle man.

One of the problems I have found with the V4 is the angle at which it sits on top of the scale. It works fine with smaller powders, however when you get to long extruded powders, it has a hard time trickling taking a long time to finish a powder charge. We made washers that fit over the rear bumper raising the rear of the unit. The washers comes in sets of 5 and raises the unit in .5mm increments. My average charge time went from 12-14 seconds with H4350, to 7-9 seconds. This is conjunction with a nipple offered by someone else on the end of the small tube. Attached are videos dropping H-4350 and N570. The price is 10$ for a set of 5 washers, and 5$ shipping. Available in black but if you would like another color, shoot me a message and we will see what we can do!

Login to view embedded media Login to view embedded media

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer. Trade? What do you have?


I need a .750 AR low profile gas block and a MLOK or pic rail (12-13.5)




2. SOLD



3. Reptilia FDE Light body with built in MLOK mount, has a SureFire M640V Infrared Scout head, endcap that has a pushbutton and Crain Port, and One Hundred Concepts cover - SOLD








4. LaRue Tactical Stealth 2.0 Receiver and Handguard MLOK, 9.5 inch - $OLD

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

Primary Arms Compact PLxC 1-8X24 FFP Rifle Scope - Illuminated ACSS Griffin MIL M8 Reticle - Comes with the One Hundred Concepts Scopecap Pro with ARD (Mount and RMR not Included), It was mounted and zeroed. Has box and all of the items it came with - SOLD​

155 rounds of UM loaded 215s. Asking $400

Looking for either AW mags with the HRD kits installed or just the kits themselves for BR. Who can help me out?

Redding 6 CM neck sizing die, seater, and full length non bushing sizing die.

$65 shipped

Anybody know the approximate turnaround time? Or sent a barrel and got it back in how long?

Had to send a 22ARC AR barrel in for accuracy issues and haven’t heard anything back or a quoted turn around time?

I know there’s been some issues with Proof accuracy. Just wondering if anybody had a similar issue and could give an approximate timeline on having my barrel back or being replaced?

Thanks in advance.

Check out this new to me sporterized M1898 Krag, whoever built it back in the day did a great job, I am really liking it

Prices are per unit. Shipping is included in the price. Payment via PPFF, Zelle, Venmo. Tracking is provided with each sale. Picture at the end of this post.

All items in excellent condition. Some are new.

Spuhr A-0009 (Deltapoint Mount)
Qty 2
$60/ea shipped

Spuhr SP-6602 (36mm - 1.5 inch - 20 MOA) ALL SOLD
Qty 2 Qty 1 Left
$340/ea shipped

Spuhr A-0001 (4mm Spacer) ALL SOLD
Qty 3 Qty 1
$20/ea shipped

Spuhr A-0032 (Picatinny Rail - medium) ALL SOLD
Qty 4 Qty 3
$50/ea shipped

Spuhr A-0015 (10mm Spacer) ALL SOLD
Qty 2 Qty 0
$20/ea shipped

Spuhr A-0003 (Picatinny Rail - small) ALL SOLD
Qty 2
$50/ea shipped

Hawk Hill Spuhr Data Card Holder ALL SOLD
Qty 2 Qty 1 left
$100/ea shipped

Spuhr A-0029 (RAPTAR Mount) ALL SOLD
Qty 2
$90/ea shipped

Spuhr MDT Send-it/Crush-it LRA 90 Degree Mount ALL SOLD
Qty 3 Qty 1 left
$50/ea shipped

For Sale, this Ruger American Ranch 5.56mm 16" barrel. It has 150 rounds down the barrel, the trigger has a custom spring and breaks at 1ib 14oz. This rifle accepts AR mags. This rifle is in excellent condition and will come with it's magazine. $375

I got a box of Hornady 174gr ELD-VT. They are 1.427” long, at least the first 10 I pulled out of the box. If the rest are like that or close then Hornady should pat themselves on the back.

They look odd. The shank is pretty short, like on a 150gr bullet. The nose is loooooong. In my chamber, where a 175gr SMK hits the lands at 2.862”, the VT hits at 2.992”. My mag will accept 2.950” long rounds so I’ll be 40 thou off at least. At that COAL there is plenty of bullet shank in the neck, more than 75%, and the boat tail ends at the bottom of the shoulder inside the case. It will need a dense powder.

I pushed the bullet deeper in the case to see what the minimum seating depth could be and I think it’s 2.800”. At that COAL the beginning of the nose is in line with the case mouth. I don’t like how that looks, however. I think some of the bullet shank should be riding the freebore. But for those so inclined this round can be used in an auto loader.

I’m going to load these on top of my usual charge of AR-Comp and just play with the seating depth to start. I know. I know. You don’t have to say it. I’ll report back in a couple of days.