That is good to know on the Fed UM22. Looks like prices went up $1 a box in the last two weeks, to $7 and $8 a box, but shipping kills it. I have had great luck with SK Rifle Match at the same price, but I have wanted to try the UM22, just don’t want it in bulk.
- Thread starter RAVAGE88
- Start date
Who did you get the stock from? or did you order it direct from manners? How long did it take to get your stock?
Those stocks are avail for purchase at coreshooting.com
For those of you that have put these in a Manners or McMillan, what barrel channel inlet have you went with? Assuming a Kukri contour barrel.
If you want your stock to be dedicated for your v22 then, mcm or manners can inlet them for your barrel contour.my stocks mostly mini chassis and jae for universal purpose.i got more barreled action than stocks.but any rem varm contour or bigger will take the v22..barrel meant to be free fluted and I don't mind the gaps
If you want your stock to be dedicated for your v22 then, mcm or manners can inlet them for your barrel contour.my stocks mostly mini chassis and jae for universal purpose.i got more barreled action than stocks.but any rem varm contour or bigger will take the v22..barrel meant to be free fluted and I don't mind the gaps
I'd be going more for the universal route as well. I'm keeping my eye on the used market for stocks right now to see if I can catch any good deals while I'm putting aside funds for a barreled action. I'm with you on not minding the gaps, but at the same time don't want to pick up something with a really big gap.
These are all v22 the above mcmilla is medium palma contour and will take your v22 drops in..check my profile that stock is for sell..
Vudoo22 is a GEM dont be cheap on her shoes and eyewear
And i bet you will shoot her more and much often than any of your rifle..lol
View attachment 6923718
These are all v22 the above mcmilla is medium palma contour and will take your v22 drops in..check my profile that stock is for sell..
Vudoo22 is a GEM dont be cheap on her shoes and eyewear
And i bet you will shoot her more and much often than any of your rifle..lol
Awesome thanks, that gives me something to go by. I've had someone offer me a T4A with a M24 contour and that's what lead me to ask about them here. Til this point I've always either had a chassis that had way more than enough gap, or wood stocks that I've just taken sandpaper to if I need a little more opening for free floating.
That McMillan looks great Bjay. I didn't see it listed in the classifieds?
So RAVAGE88, do us guys waiting in builds get the new Vudoo owners shirts with our rifle? (Hint hint). I’ll take a 3X! Oh yea a fitted hat too.
Proof Sendero contour
If your paying for a Vudoo you can afford to buy a shirt. Plenty of us have bought them, do we all deserve free shirts? I think you can pay for one.
There are two different shirts. The Grey one is reserved for owners only and a Black one that's available for anyone. Both can be purchased through the website or by calling the shop in St George. This applies to hats and other swag as well.
Thanks, Guys,
MB
Thanks, Guys,
MB
When they introduce an “owners only” shirt that’s a way to send them with a rifle they just bought.
When they charge what they do for a rifle they can afford to throw in a shirt.
It goes both ways.
When they charge what they do for a rifle they can afford to throw in a shirt.
It goes both ways.
The rifle is worth what they charge for it, so is the t-shirt.
I got everything I paid for on my order and you will too.
If you think you deserve a kewpie doll for being their customer, you're a bigger ass whipe than the free 3x shirt would cover.
Lol I didn’t say I deserved anything.
Seriously it’s amazing what you guys get up in arms about.
Back to rifle related topics please. I have learned my lesson.
Seriously it’s amazing what you guys get up in arms about.
Back to rifle related topics please. I have learned my lesson.
I am curious, did any of you order the case they offer? I've got several cases, but I do like the look of it and feel like it would be a good addition to the rifle, so I can keep all of the Vudoo mags, Atlas, etc... together.
Has anybody purchased one?
Has anybody purchased one?
I did. It is a very nice addition to the rifle. The case is made by Peak Case Company.
Finally got my Vudoo together, got a barreled action from Mile High with 4 mags, ARC rings, XRay chassis, and Ingenuity Gunworks rail to replicate my match rifle. Waiting on the Athlon Ares ETR, and its game on! These Vudoos are awesome, worth the coin and the hype! Just a quality action, well done.
Thanks Nate!
WWhich ones grouped the best? What distance were you shooting?
No problem buddy!!
Shot about 45 rounds Thursday when the son in law come to pick up the grandson after staying with us a couple of days of fun and sun and had quite a few that was difficult to chamber and extract. Most of them was the CCI SV's and about 9 or 10 of the SK's that the bolt closed a little tight on would not extract without being fired.
100 yard practice with the Vudoo.
5 shot group just under .5" center to center. Loving this rifle.
SK Standard Plus
light to no wind
5 shot group just under .5" center to center. Loving this rifle.
SK Standard Plus
light to no wind
Now that's some dandy shootin.100 yard practice with the Vudoo.
5 shot group just under .5" center to center. Loving this rifle.
SK Standard Plus
light to no wind
I have been looking at one of these also.
Can you elaborate on the interior compartments? I know that from the single pic from their site some are pretty obvious, but would like to know how many mags it holds etc.
I’m still trying to figure out what each cut-out’s intention is for. I only have 4 mags and there is 2 locations that fit 2 each perfectly. Big cutouts that I use for ammo and scope sunshade. I store multi tool and cleaning kit in smaller cutouts. They have included a dehumidifier type device to prevent moisture in case that has its own cutout. I leave bipod on and did have a cheek pad on but took it off because I got low NF rings to go on pst gen ii 5-25. On the rifle cutout they have it so you can leave scope on and also leave a “floating” piece of foam if your scope is longer. (mine fits perfect w/o taking out the loose piece of foam.) Maybe the guys at Vudoo could elaborate because this was just what has worked for me. I am curious if they had specifics in mind while designing this case?
That's good info Nate, thanks for sharing!
What size Seekins rings will be best to mount a Vortex Razor AMG on a 20 moa base ? I'm looking at the .87 medium and the .92 medium high. I want to be sure that the scope caps and bolt lever ( large bolt handle) will have sufficient clearance. Thanks for any info !
I
I run the 24mm ARC rings with no issues. thWith the AMG and 20moa base. There close (0.95" ) I wouldn't go any lower than those
Actually, mine is nothing fancy, I have a drag bag (soft case) inside a Pelican hard case, same as all my 3 Gun gear. Much easier to move around matches with the drag bag then case it up and travel home with it.
MB
That's as low as you can go. See post #844 and #847.
Tha
Thank you for the information! It looks like the .97 seekins high rings should be a safe choice.
Last edited:
Check my photos above..that nightforce competition with 52mm obj is sitting on .885 nightforce the theta got .92 no problem with biggest v22 knob and clearance for kukri contour
Kyle said my other Vudoo is ready to ship.. Check out the sized ejection port. https://taylorprecisioneng.com
. https://taylorprecisioneng.com Have you had a chance to look at this?
Love that!! Kyle does awesome work...Kyle said my other Vudoo is ready to ship.. Check out the sized ejection port
View attachment 6926000
DW
I tried 0.81 high rings with my AMG but the bolt handle would just barely hit the scope. I went to 0.93 high rings and have lots of clearance now.
That is a masterpiece!!Kyle said my other Vudoo is ready to ship.. Check out the sized ejection port
View attachment 6926000
Kyle said my other Vudoo is ready to ship.. Check out the sized ejection port
View attachment 6926000
That has the smaller countour on the barrel right? Curious to know what that weighs in at with that config, nice rifle.
Similar threads
