A lot of drama behind this rifle but i sure do miss the chassis. Original Strike 33 
- Thread starter Shawn Bevins
- Start date
Just installed the Henderson Precision: Universal 12 inch 1.5 "D" Rail: Chassis Kit. Me likey. Me likey a lot.
I was wondering when someone was going to buy that thing.
It was so lonely on the shelf amongst the AI’s.
Few questions for the group:
Can someone explain the Roller bedding. Seems like it’s just cylindrical rods glued into slots for matting surface for the action.
How much torque do you guys use for the action screws? I’ve always used 60in/lbs but recently people have been beating on their rifles to simulate hard useage and showing a POI shift when rifles aren’t bedded properly. This question, sparked the first question.
Why in the hell does Kraken barrels cost $1,200-1,300.00???
Can someone explain the Roller bedding. Seems like it’s just cylindrical rods glued into slots for matting surface for the action.
How much torque do you guys use for the action screws? I’ve always used 60in/lbs but recently people have been beating on their rifles to simulate hard useage and showing a POI shift when rifles aren’t bedded properly. This question, sparked the first question.
Why in the hell does Kraken barrels cost $1,200-1,300.00???
-Both my current Cadex folding stock (Lite) factory long action rifles do not have roller bedding. Along with the 308 guardian rifle I just sold. Not sure what ones do?
65 inch pounds is what I was told from Cadex. Have to look at my manual. For switch barrel rifles I perfer the Accuracy International AXMC.
My Long Action Lite Comp chassis has roller bedding in it.
I’m running a LA BigHorn Arms action which didn’t specify the torque spec. Edit: just called and they said 55in-lbs
I prefer the Kraken switch barrel design. Not saying I’m buying one but I would if their barrels didn’t cost as much as a new action. At that price, just have a multi rifles lol.
10-4. I only have factory Cadex rifles so no experience with the rollers on just a chassis itself.
Yes they are expensive!
Who makes this aftermarket stock and will it fit all other cadex chassis ?
My Lite Strike has roller beading in it. TQed to 60 in-lbs IIRC Has been holding true and tight for two years and through about 1480, 338 rounds sent.
Hey all, just wanted to see what you guys are using for S/A mags in the Cadex chassis. Thanks!
Accurate Mag and AICS feed fine in mine. Mine is a factory gun if that matters.
I've used accurate, ARC, and MDT in my Tikka/Cadex with no issues
Same here. Accurate, AI, and MDT all work well for me. Factory rifles.
Accurate and MDT for me as well. Tight lock up, but it’s all very new. I have sanded a Magpul to work as well, and it still works in my rpr too.
Yes the magpuls need a little sanding to work. After that, they seem to function fine.
I think you can get an insert, they have different plastic inserts
Anyone know which action the Shadow has in it or who manufactures the action for the Shadow? I’m assuming it’s a larger action than the Shepherd because of what it’s shooting.
Just trying to inform myself before purchasing
Just trying to inform myself before purchasing
It's a Cadex CDX-40 action
Cadex Defence – Online Store
Dear customers, the Cadex Online store is only available for Canadian and US customers.
cadexdefence.com 
Tikka T3X CTR in .308 in a Competition Lite Chassis (I think)
I like the ergos. I have since changed the optic mount to a higher 1.4 inch Spuhr Throw lever mount.
CadexTikkaT3X-01 by Chris Hoesel, on Flickr
I like the ergos. I have since changed the optic mount to a higher 1.4 inch Spuhr Throw lever mount.
CadexTikkaT3X-01 by Chris Hoesel, on Flickr
New member here and this is my Tikka T3X 6.5CM in a Cadex Defence Field Competition in Stealth Shadow Vortex. Love this rifle!
reread thread and found what I was looking for.
Last edited:
Posting this up for my shooting partner Bubba McBubba since he wouldn't know a .jpg from a Polaroid. This thing is a beast. CDX40 in 408 Cheytac.
I removed all of my rail screws and blue loctited them, then reinstalled back at 20 in/lbs. Haven’t touched the action screws as I have a factory rifle, so I left those be.
Defiance action / Bartlein tube sitting in a Competition Lite Chassis in .338 Lapua.
Last edited:
This just happened lol love the new lite comp chassis. Forend is now m-lok and I thought they couldn’t accept AW mags? Hmmm ? ?
Lol don't mind me though
Curits Vector action
MTU bartlein 26"
AW mags
And I'll be putting an ARCA rail on it. Feeds perfect just drop in and go
Lol don't mind me thoughCurits Vector action
MTU bartlein 26"
AW mags
And I'll be putting an ARCA rail on it. Feeds perfect just drop in and go
I have almost the exact same build getting finished up at short action customs in 6.5PRC! Do you like it? Also, where did you get that bolt knob?
Well it's balanced really well and I was hoping to shoot it but, I am working on a trade for an AI, so I may not have a chance to shoot this one. I will build another sometime in the future. The bolt knob is from MPA and I like it alot, made the bolt lift seem a little lighter since it add a little bit of length.
are you getting the AXMC? I really considered the AI before going with the Cadex chassis, Vector action, Bartlein barrel and Huber concepts... I might try to trade in a couple of my custom rifles for the AXSR once that’s been out for a while...
An acquaintance of mine of mine has an AT in excellent shape, so we are probably going to trade. I will more than likely look at trying to acquire an axiom for a 224 Valkyrie, since the AI is only capable of doing 308 based calibers. I am very impressed with the Cadex chassis and would not hesitate to purchase for my next build.
Last edited:
What arca rail are you guys running on the comp chassis?
What action do you have on that?
Picked up comp chassis today. They need to market this thing better. Much nicer and more comfortable than I was e
What caliber?! Looks awesome!
50 bmg. It’s very heavy. I haven’t got it sighted in yet. Just put the scope on it a few weeks ago
I have that same action! Will it fit the model for REM 700 LA Mag w CIP collet? I believe it should.....
Kraken .308 / .300 win mag combo. Even though I really wasn't excited about the tools required to perform barrel swaps, I went ahead and tried one. I'll report back with a review and comparison to the AXMC.
Ok, short review on the kraken....
Barrel changes: Not nearly as bad as I initially thought. Now that I'm proficient with the tools, I can swap calibers in right around 1 minute. That's about the same time as it takes with the axmc.
POI repeatably after barrel removal: The kraken has the axmc beat here. I shot a 5 shot group with each, removed the barrel and shot another 5 shot group three times with each. The kraken didn't move at all. My AXMC changed approx. .2mils the first switch, .3mils the second and was close to back to zero the last one.
Accuracy: Both barrels I tested were .308 shooting factory federal gmm. Both shot just under 1/2" at 100 yards.
My only complaint about the kraken.... The bolt is a touch sticky. My AXMC was like butter straight out of the box. I'm hoping the kraken will break in and smooth out some with more use. Barrels have to be special ordered to your serial number as well. It's not like AI where you can just call up a dealer and buy another barrel off the shelf. Other than that, I really like the rifle and will be keeping it a while!
Edit: I had a couple guys ask about the trigger and feeding.
The trigger is very nice! Adjustable from two stage to single stage as well. It came set up as a two stage at 2#. I adjusted the second stage to 1.5# and called it good.
The rifle feeds flawless.
Regards,
Todd
Barrel changes: Not nearly as bad as I initially thought. Now that I'm proficient with the tools, I can swap calibers in right around 1 minute. That's about the same time as it takes with the axmc.
POI repeatably after barrel removal: The kraken has the axmc beat here. I shot a 5 shot group with each, removed the barrel and shot another 5 shot group three times with each. The kraken didn't move at all. My AXMC changed approx. .2mils the first switch, .3mils the second and was close to back to zero the last one.
Accuracy: Both barrels I tested were .308 shooting factory federal gmm. Both shot just under 1/2" at 100 yards.
My only complaint about the kraken.... The bolt is a touch sticky. My AXMC was like butter straight out of the box. I'm hoping the kraken will break in and smooth out some with more use. Barrels have to be special ordered to your serial number as well. It's not like AI where you can just call up a dealer and buy another barrel off the shelf. Other than that, I really like the rifle and will be keeping it a while!
Edit: I had a couple guys ask about the trigger and feeding.
The trigger is very nice! Adjustable from two stage to single stage as well. It came set up as a two stage at 2#. I adjusted the second stage to 1.5# and called it good.
The rifle feeds flawless.
Regards,
Todd
Last edited:
Just more of a good measure. I did thread locker on the bolts that hold the chassis together, but not rail/accessory stuff.
MACTECH, that looks so good. Eye candy. I have been thinking either an AI or Cadex, and am tilted towards a CADEX CDX-40 Shadow in 375CT, but not sure if I am missing out on anything by not going with the upcoming AI ASR instead. I see a lot more AI AXMC for sale than CADEX rifles, and the CADEX rifles seem harder to get.
Any views/opinions?
Thank you Frank. I have the CDX-40 as well in 375 cheytac. They are great rifles but only come in .375 or .408. If you're serious about getting into ELR but still thinking you want a switch barrel, I'm going to highly recommend the AXMC. You'll be able to shoot short action .308 Win. case head cartridges up to .338 Lapua case head cartridges. Then when you're ready for ELR, get a good Smith to turn you up a 33xc or 37xc barrel for the same rifle.
Have a great weekend!
Todd
If and WHEN CADEX makes a smaller diameter forearm that lowers the Pic rail by 1/2" I might be interested.
Barrett gets it with their MRAD.
But CADEX STILL has not understood how badly their large forearm diameter screws up a decent cheek weld for prone position, adjustable comb notwithstanding.
Barrett gets it with their MRAD.
But CADEX STILL has not understood how badly their large forearm diameter screws up a decent cheek weld for prone position, adjustable comb notwithstanding.
