• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Vudoo Gun Works V-22 Rimfire Bolt Action

If you like shooting 10 round groups come join us over here
www.snipershide.com

5X10 100 yard challenge

I have been thinking about starting this up for a while, so I decided to give it a go today to see if it draws any interest. If so maybe we can make it a sticky. Not to take the place of the 6X5 thread which I will keep going as long as there are people who want to shoot it, but rather another...
www.snipershide.com www.snipershide.com
 
  • Like
Reactions: Krob95, Jefe's Dope, phlegethon and 1 other person
Krob95 said:
Shot my Vudoo indoors today for the first time since this bullshit rona virus shut down the range and it was splendid! Shot two practice groups at 50yd to warm up (not pictured) and then shot at the little Instagram logo for a 0.3” group at 50yds (Ballistic-X doesn’t give you the option for 50yd yet). Took it out to 100yds after that and shot the middle square 10times for a 0.67” group. All shot with Center X. This Proof carbon barrel has exceeded my expectations fully! View attachment 7319638
Click to expand...

Better stock up on that lot #! 🤠
 
  • Like
Reactions: Krob95
qodeBebop said:
Any one know what the current lead times are for barreled actions?
Click to expand...
Mile high should have some in stock, as should Altus. I’m not sure about ordering straight from vudoo however.
 
Krob95 said:
Mile high should have some in stock, as should Altus. I’m not sure about ordering straight from vudoo however.
Click to expand...
I'm wanting a left handed action and while Mile High has one in stock its not the length and profile I want.
 
  • Like
Reactions: Krob95
Hey guys, for anyone who is interested I just dropped Dedicatedshooter a Vudoo magazine in the mail so he can make some Kydex mag carriers for it. He has an ad up down in the PX. I have been looking for one made for the Vudoo mag instead of just the AICS version. SAP has them but I like his a little more based on what I’m seeing. He has some great prices so you may want to take a look if you need one.

www.snipershide.com

Accessories - “The Original” Adjustable Retention Mag and Kestrel Holders

Updated May/June ‘21 “The Original” Adjustable Retention Kydex Mag Holders for Short or Long Action AICS-pattern, V22, B14r, magazines, and Kestrels for sale! Details: - Carbon fiber in either OD, Black, or Coyote - Adjustable retention device - Flared opening - SA holder fits ALL steel...
www.snipershide.com www.snipershide.com
 
Last edited:
  • Like
Reactions: jeronimo, Krob95, ballisticdaddy and 2 others
Krob95 said:
Shot my Vudoo indoors today for the first time since this bullshit rona virus shut down the range and it was splendid! Shot two practice groups at 50yd to warm up (not pictured) and then shot at the little Instagram logo for a 0.3” group at 50yds (Ballistic-X doesn’t give you the option for 50yd yet). Took it out to 100yds after that and shot the middle square 10times for a 0.67” group. All shot with Center X. This Proof carbon barrel has exceeded my expectations fully! View attachment 7319638
Click to expand...
I have Ballistic X on my iphone and on it if you tap on the 100 that pops up you can put in whatever number you like. Like this.
UNADJUSTEDNONRAW_thumb_ce0b.jpg
 
  • Like
Reactions: 10ring1, Krob95 and ballisticdaddy
I'm new to this forum and just wanted to say you might see me hanging around this section. I recently ordered a full build V22. I was told on May 6th when I placed the order it was approximately an 8 week wait. This is going to be the longest 8 weeks ever. It made the 4 week wait on the scope not seem so bad. Look forward to seeing peoples rifles and groups.

Gjmen22
 
  • Like
Reactions: jeronimo and littlepod
Eoddave27 said:
You will not be disappointed and it is worth the wait. Mine pretty much loves anything with a Lapua/SK label on it. I’ve also found mine likes the cheap GECO ammo for practice.
Click to expand...

I have almost a full case of CCI SV that I hope shoots halfway decent. There is also a few bricks of R-50 and Tenex on the ammo shelf that doesn't shoot all that great in my other rifles. My plan for now is to shoot up the stuff I have then hit the Lapua test range in the spring.
 
Gjmen22 said:
I have almost a full case of CCI SV that I hope shoots halfway decent. There is also a few bricks of R-50 and Tenex on the ammo shelf that doesn't shoot all that great in my other rifles. My plan for now is to shoot up the stuff I have then hit the Lapua test range in the spring.
Click to expand...

Sorry to tell u this but Cci sv is pretty poo for this rifle wrong size. It uses a lapula chamber. Sk will be best bet for cheap ammo. I'm now looking a 22lr that will shoot Cci sv well.
 
I tried the cci sv and had some trouble chambering it in my vudoo so I backed off on it.
 
I been running SK yellow and red box and Lapua center X and it runs great.
 
  • Like
Reactions: Hegre
Gjmen22 said:
I have almost a full case of CCI SV that I hope shoots halfway decent. There is also a few bricks of R-50 and Tenex on the ammo shelf that doesn't shoot all that great in my other rifles. My plan for now is to shoot up the stuff I have then hit the Lapua test range in the spring.
Click to expand...

No issues shooting CCI Standard Velocity out of mine, when I did this ammo test.
However, since then, I've only been shooting SK Standard Plus and SK Magazine for practice.
Lapua Center-X gives the best results out of mine, so far.




I will re-visit this ammo test again, now that I've put over 1,000 rounds through it,
sometime in the near future. I'd like to try some Geco, RWS, and Eley, for good measure.
 
  • Like
Reactions: Gjmen22
Gjmen22 said:
I have almost a full case of CCI SV that I hope shoots halfway decent. There is also a few bricks of R-50 and Tenex on the ammo shelf that doesn't shoot all that great in my other rifles. My plan for now is to shoot up the stuff I have then hit the Lapua test range in the spring.
Click to expand...
There are quite a few posts in this forum re CCI SV in the Vudoo. My experience has been:
  • The tolerances for the ammo are pretty wide, especially as regards rim thickness. This will affect feeding.
  • If you can close the bolt on it, you can shoot it - this per @RAVAGE88. Stuffing the long bullet skirt into the lands won't hurt the rifle but there's a good chance you will be unable to extract/eject the unfired round.
  • Due to the aforementioned tolerances, accuracy can be inconsistent, across lots and from round to round.
    - I just started into a new case which actually feeds more easily than any lot before it. Yay, since 5k rounds of it.
    - I use CCI SV for positional practice on 2-3MOA targets out to 100 yards.
    - Past that, it's luck. Even within that envelope, there are plenty of WTF moments.
    - But at a fraction over 5 cents a round, compared to 20+ cents for Center-X, it works just fine for PRS positional practice.
Wrt Eley Tenex with its flat nose: I tried Eley Edge and Eley Match in my MPA-chassis'ed V-22. The Edge didn't do well. The Match was as good as Center-X. Problem was, in my rifle, the flat noses all too often jammed into the front of the mag, causing a jam that all too often required dropping the mag to clear. Royal pita, on the clock. Other Vudoo people report Edge/Match/Tenex feeds just fine.

Back to CCI SV: if you have it, run it. Ain'ta'gonna hurt the rifle.
 
Yup, alternating between .22lr and .308 on identical set ups is hilarious but helpful for me. Vudoo/Impact in MPAs.
 
  • Like
Reactions: reubenski
Those are some nice looking targets. Has anybody noticed any difference between the aluminum and polymer/plastic magazines? is there any advantage from one over the other? It's nice you can get the 12 round magazines but I see only offered in aluminum. I,m guessing, but could be wrong, the 15 round aluminum mags look like they could get a little awkward because they are getting quite long.
 
What geco ammo do people run through there v22 with what results. I have access to match, 22lr rifle and semi auto.

It's all order in by 500 min
 
Gros21 said:
What geco ammo do people run through there v22 with what results. I have access to match, 22lr rifle and semi auto.

It's all order in by 500 min
Click to expand...

The subsonic match ammo would probably work best, as others have stated the Lapua ammo seems to work best in the Vudoos
 
I shoot a lot of cci standard velocity and subsonic through my vudoo. I can get it local and in bulk. It's done well for me. No, it won't extract a live round but my rifle won't extract a live round of any brand. Sk and lapua included. Sometimes the bolt is a little stiff closing but I think that's more due to rim thickness than the bullet engraving. It seems to have gotten better with time. Probably 3,500 rounds through the rifle at the moment.
20200509_094312.jpg


Shot this last Saturday in a gusty NE wind at 13mph. Where I shoot from is open to the east but my range is bordered by trees the rest of the way to the target. As the wind tops the trees and drops over into my pasture it swirls in about three different directions. 7 out of 10 ain't bad considering the conditions. Cci sv at 186 yards on 3" steel.
20200509_094312.jpg
 
  • Like
Reactions: 10ring1, Gjmen22, SourMash and 2 others
Gunfighter716 said:
Thank you for the advice on the SK S+. Will definitely give that a shot as well.
Click to expand...

Which case is that? It fits so well.

I just ordered a Vault V730 and waiting on Pelican to ship it which I think will fit very similar to your above picture. Also my Terminus Zeus will go in there and I'll pull the barrels and cut foam cutouts for the barrels.
 
littlepod said:
Which case is that? It fits so well.

I just ordered a Vault V730 and waiting on Pelican to ship it which I think will fit very similar to your above picture. Also my Terminus Zeus will go in there and I'll pull the barrels and cut foam cutouts for the barrels.
Click to expand...
That's a Pelican 1720 with the 22" barrel. I would prefer a little more padding on the ends, but this would work great for anyone running barrels 20" and shorter.
 
  • Like
Reactions: Jefe's Dope
littlepod said:
Indoors? For 10 shots that's remarkable. That's would be one of the top shooting groups at the Lapua indoor testing facility.

.67" + .221" converted to mm = 22.6mm (edge to edge)

Click to expand...
Indoors yes, I’m fortunate enough to have a indoor range 10 minutes from my house lol I was apprehensive to buy a vudoo with a proof barrel as there really wasn’t much data on group sizes at 100yd and hardly any at 50yds but it had far exceeded my expectations. I figured if @RAVAGE88 is selling them with proof barrels they must be damn good, and they are!
 
  • Like
Reactions: 10ring1, Jefe's Dope, Bob huth and 1 other person
Thought I would share some data I discovered concerning the vudoo and action torque recently. Mine is the apparition in mpa chassis and it’s great but, does have some things I wish were better. So I bought a bell and Carlson stock for a more traditional style and it’s also great btw. To the point I inletted the stock for the vudoo bottom metal and realized I needed shorter action screws so I ordered some new ones mean while I cut and filed one I already had for spare and used the mpa rear as the front screw. Took the gun and shot at 300 yards when I got the new screw realized the front one I had on was not even letting the bottom metal make contact on the front. Fixed everything shot again and no change in poi or accuracy really. So the moral is if you have a quality rifle and quality stock I can relax a little on things like torque values.
 
  • Like
Reactions: MLS2GO
22fun said:
LOL just bought some today from creedmoor sports never shot it before but it people seem to like it and the price is right.
Click to expand...
I just want to have plenty on hand when my action gets here to play with for at least a brick before worrying about what’s the best. I have always shot CCI sv for general minute of golf ball accuracy out of my cz.
 
I have a vudoo barreled action on the way. I'm putting it in a krg bravo and wondering if I use the action screws sent with the bravo stock? Or does vudoo send some that I need to use?

Thanks
 
GibsonL5 said:
I have a vudoo barreled action on the way. I'm putting it in a krg bravo and wondering if I use the action screws sent with the bravo stock? Or does vudoo send some that I need to use?

Thanks
Click to expand...

The KRG should be perfect.
 
  • Like
Reactions: GibsonL5
GibsonL5 said:
I have a vudoo barreled action on the way. I'm putting it in a krg bravo and wondering if I use the action screws sent with the bravo stock? Or does vudoo send some that I need to use?

Thanks
Click to expand...
AFAIK Vudoo doesn’t supply screws. Use the ones that ship with the Bravo. They work fine for me
 
  • Like
Reactions: GibsonL5
When I started my build back in February, I wanted to keep my new toy as much of a sporter as possible..ordered a 18” ranch profile.
I went with a AG Composites privateer in carbon bronze.
Bottom metal is a PTG flush mount oberndorf.
Trigger is a triggertech special set at 1#.

Today I did a “slight” modification to the polymer 10 rd mag... here’s a few pics. (5 rd aluminum also in pics).
Put a vortex razor HD LH 3-15 on top of it.

D8D65FF9-9EE1-4610-8A14-2DC2D0BDE513.jpeg
58F71843-E5B7-4BAA-8229-950F8A1FCB04.jpeg
3178CE85-0228-4CDE-B959-589B06F398A0.jpeg
 
  • Like
Reactions: geek65, 10ring1, jeronimo and 5 others
You must log in or register to reply here.

Similar threads

W
SOLD For Sale: Very nice Vudoo Gun Works V22T 360 Barreled Action
Replies
2
Views
833
uortiz
uortiz
E
Firearms SOLD. For Sale: Vudoo Gun Works V-22 Barreled Action (Gen 2) (Barrel Length: 22" (MTU Contour) Photos added
Replies
4
Views
930
etrahan
E
J
SOLD Vudoo Gun Works V-22 Barreled Action (Right Hand Gen 2 / 22" Kukri) $1600 shipped
Replies
3
Views
754
7421
7421
Wink1033
Firearms Vudoo Gun Works V-22 barreled action
Replies
2
Views
2K
Wink1033
Wink1033
SkepticalTiger
Henry Youth H001Y Range Report and Groupings
Replies
2
Views
420
SkepticalTiger
SkepticalTiger
Top Bottom
Back