• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Recent content by shoepop

  1. S

    Gunsmithing Sako TRG advice

    Re: Sako TRG advice <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mac37</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I would be concerned with it ejecting. It doesn't eject cartridges...
  2. S

    Gunsmithing Sako TRG advice

    Re: Sako TRG advice <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bward</div><div class="ubbcode-body">My heavy palma Kreiger hits on mine. I had to have it milled down. My chassis is older so that may have something to do with it, but I don't know why that...
  3. S

    Gunsmithing Sako TRG advice

    Re: Sako TRG advice <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bward</div><div class="ubbcode-body">If you are going to use a Sako bipod, or the Atlas mount that replaces the TRG bipod mount, you will have to mil on the barrel to get it to clear if you go...
  4. S

    Sidearms & Scatterguns Which 1911 for $1000

    Re: Which 1911 for $1000 Good thing if you just can't take mim for $250-300 you can change it out. There are plenty high end vendors out there just a flip through Brownells away.
  5. S

    Sidearms & Scatterguns Which 1911 for $1000

    Re: Which 1911 for $1000 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SuppressorJunkie</div><div class="ubbcode-body">I never would have thought that in a firearms or that it would even hold up in one...Who all uses this process? Thanks Veer_G </div></div> It...
  6. S

    Sidearms & Scatterguns Which 1911 for $1000

    Re: Which 1911 for $1000 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rrflyer</div><div class="ubbcode-body">STI Trojan http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=3070000-1095448549 </div></div> As an 001 ffl I see a lot of 1911 platforms come...
  7. S

    Gunsmithing Sako TRG advice

    Re: Sako TRG advice A medium Palma will have less muzzle diameter albeit not much when finished at 26" like standard TRG 22. The factory chassis will take a LOT more if you desire. I built 6xc using medium Palma Bartlein and If I did again would go heavy Palma or other heavier contour.
  8. S

    Gunsmithing Krieger Barrels ?

    Re: Krieger Barrels ? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: protoolsnerd</div><div class="ubbcode-body">I talked to a tech at Krieger last week about what barrel to get. In asking about 5r rifling he said that they didn't find it was more accurate but ...
  9. S

    Feedback Good Guy List

    Re: Good Guy List (re wfjames22) GolfTango3 , one class act buyer.
  10. S

    Rifle Scopes how do you guys think Premier compares to S&B

    Re: how do you guys think Premier compares to S&B I purchased one at their initial offering. I can't bad mouth but I sold it after a few months and purchased another S&B. It had more to do with my familiarity with S&B's than anything. I have been behind them since they still impressed.
  11. S

    anyone use rcbs 1010 scale ?

    Re: anyone use rcbs 1010 scale ? I have had two new in last 6 months, the first was purchase second replacement from RCBS both crap. The replacement gathering dust on shelf. I'm not going to send it out to get 'tuned' it can rot on the shelf.
  12. S

    what range do you guys site in your 338's at?

    Re: what range do you guys site in your 338's at? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DirtD</div><div class="ubbcode-body">I site in at 100y's. I would site at 250 but the range that I shoot at is always busy and It would be huge a hassel to stop the...
  13. S

    what range do you guys site in your 338's at?

    Re: what range do you guys site in your 338's at? I use a 45 moa base, sight in @ 100.
  14. S

    Rolex Question

    Re: Rolex Question <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ed-G</div><div class="ubbcode-body">I have my Dad's two-tone date-just that I have investigated selling, my conclusion is to have Rolex do a service. I found the watch's that have been serviced by...
  15. S

    Rifle Scopes NF Mil Spec Scopes are No More ...

    Re: NF Mil Spec Scopes are No More ... Frank I've been called a lot of things in my 60 years but never an "idiot", at least to my face. To bad the day you can throw it out without standing toe to toe and looking a man in the eye.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts