Hrd mag spacer kit is all I use and it's flawless.
Think it was the ATX thread. Guys complaining about the bolt lift on the ATX vs older AI models. I measured mine the same way another guy did using a trigger pull gauge. Took 12 lbs to lift the bolt after dry firingWhats that even mean, thanks anyways
It’s from that thread
Not crapping on you. I have the exact same gun in elite sand
Anyone ever rig a brass catcher up to their AI? I hate losing brass in the grass/dirt/swamp but also hate poking around in the grass all the time to find it. I've love to have a catcher to throw on when shooting in the swamp then take it off afterwards.
Nothing a 7 axis dremel can’t fixIt is pretty heavy though
Whats that even mean, thanks anyways
Is that like a colostomy bag?
The Xero is comically small.
The only thing that the labradar has over the Xero is that the LabRadar app is more full-featured. But the app only works 30% of the time, so it's a wash.
I fully expect that Garmin will add features later.
The only thing that the labradar has over the Xero is that the LabRadar app is more full-featured. But the app only works 30% of the time, so it's a wash.
I fully expect that Garmin will add features later.
I might give that a try. I was thinking the front of the catcher might interfere with a support bag or barricades but it's only a mesh bag so it should be OK.
My proof of concept for a Garmin mount for my MC, few more mods. ( Edit) pictures of the final geometry, not sure if it will work with the elite iron but looks GTG with a normal bipod placement. Still a bit "blocky" but its fine for testing.
Last edited:
It is a device that lowers the weight of the AI’s bolt lift without using a dremel.
In addition to that, it’s a pretty neat skid pad/minimal profile barricade pad that velcros on. They’re discontinued but I got lucky and snagged it from a true American hero.
Hmmmm, I might need something like that for my AT-X.
Maybe I can hire someone to make a pad that looks like a hairy nutsack to put on the ARCA rail in keeping with the AI Keyslot erect dick theme.
Maybe I can hire someone to make a pad that looks like a hairy nutsack to put on the ARCA rail in keeping with the AI Keyslot erect dick theme.
Want me to dremel one up for you?
Since it’s an AI accessory it’ll be $1200 and 2 years out
LOL.
My mom likes to sew, I was thinking a plush nutsack to put on the rail as a built in bag to rest the fore end on.
My mom likes to sew, I was thinking a plush nutsack to put on the rail as a built in bag to rest the fore end on.
/flexon
I visited my operations at KASOTC in Jordan last week. We have a training contract there and my onsite staff work hand-in-hand with KASOTC staff for mission success. I mentioned that I still haven't had a chance to shoot with them on their ranges, and we were out the next day at the KD range with the JAF sniper section. No pressure showing up cold, getting behind a suppressed AI in 308 with an S&B PMII (with the euro (reversed) turrets), no range card and with a crowd of JAF snipers seeing if the old American boss can actually shoot. They set targets at different elevations out to 800M and I was issued some factory Hornady. Spotting was a challenge since their English was as bad as my Arabic. I dropped a shot at 800M, but a quick correction finished the challenge.
Rinse an repeat two days later at the UKD range with an AI in 338LM. They set me up as an over watch for a assault force with 11 targets to be engaged in sequence out to the last steel plate that drops a large KASOTC banner. Same pressure as before, but differing and swirling winds for the session. Dropped one of the last shots, but held my own. Of course, the only picture was after I finished and I snapped a quick pic of the AI before it was off to the flat range for some rifle and pistol work. It's great to be the boss as any day on the range is a good day. /flexoff
For reference, the UKD range is off to the left in the pic that follows (a village setup).
I visited my operations at KASOTC in Jordan last week. We have a training contract there and my onsite staff work hand-in-hand with KASOTC staff for mission success. I mentioned that I still haven't had a chance to shoot with them on their ranges, and we were out the next day at the KD range with the JAF sniper section. No pressure showing up cold, getting behind a suppressed AI in 308 with an S&B PMII (with the euro (reversed) turrets), no range card and with a crowd of JAF snipers seeing if the old American boss can actually shoot. They set targets at different elevations out to 800M and I was issued some factory Hornady. Spotting was a challenge since their English was as bad as my Arabic. I dropped a shot at 800M, but a quick correction finished the challenge.
Rinse an repeat two days later at the UKD range with an AI in 338LM. They set me up as an over watch for a assault force with 11 targets to be engaged in sequence out to the last steel plate that drops a large KASOTC banner. Same pressure as before, but differing and swirling winds for the session. Dropped one of the last shots, but held my own. Of course, the only picture was after I finished and I snapped a quick pic of the AI before it was off to the flat range for some rifle and pistol work. It's great to be the boss as any day on the range is a good day. /flexoff
For reference, the UKD range is off to the left in the pic that follows (a village setup).
Proud of you dude. Way to represent MCB Range 4……/flexon
I visited my operations at KASOTC in Jordan last week. We have a training contract there and my onsite staff work hand-in-hand with KASOTC staff for mission success. I mentioned that I still haven't had a chance to shoot with them on their ranges, and we were out the next day at the KD range with the JAF sniper section. No pressure showing up cold, getting behind a suppressed AI in 308 with an S&B PMII (with the euro (reversed) turrets), no range card and with a crowd of JAF snipers seeing if the old American boss can actually shoot. They set targets at different elevations out to 800M and I was issued some factory Hornady. Spotting was a challenge since their English was as bad as my Arabic. I dropped a shot at 800M, but a quick correction finished the challenge.
Rinse an repeat two days later at the UKD range with an AI in 338LM. They set me up as an over watch for a assault force with 11 targets to be engaged in sequence out to the last steel plate that drops a large KASOTC banner. Same pressure as before, but differing and swirling winds for the session. Dropped one of the last shots, but held my own. Of course, the only picture was after I finished and I snapped a quick pic of the AI before it was off to the flat range for some rifle and pistol work. It's great to be the boss as any day on the range is a good day. /flexoff
For reference, the UKD range is off to the left in the pic that follows (a village setup).
I tried.
Got there on the second day and they gave me a quick safety brief then I'm behind the gun. LOP is off so I don't have a good shoulder pocket, eye box is off, they're using one of those mono-pods instead of a bag (I ditched it), I know there's going to be free recoil 'cause the LOP is so short and the scope so far to the rear; basically it's hard to get comfortable behind the gun. I took a couple dry fires and one of the sniper instructors says, "why isn't he shooting?" I get kind of pissed so I dial up for 500M and engage first three targets in the proper sequence (black, yellow, red) in a doorway / windows. It's 500M with a 338LM and the targets were probably 5MOA so I just shot, moved to the next, shot, adjusted then shot the last round, all without waiting for the impact call. IDK, a 6 second string? Peanut gallery then says, "he shoots fast" and leaves me alone.
Anyways, not trying to mischaracterize the event. It was fast paced and well worth it to be back behind a rifle. Now, my M4 CQB drills, that was another matter...
Last edited:
I sold the magneto when I got the LR....and I probably got more for the MS than i could possibly sell the LR for now.Needs a magnetospeed just to make sure
About an inch past. 18.5” on an MC, same 16” forend length as the SR. Shown with a CB brake.
Ok that’s sexy. Didn’t need to see that. So I should get a 18.5 308 since my 20” 6.5 sticks out too far…. Lol
OR.....
You can get a forend from an AX and run a 16.5" 308 in what I refer to as "The mullet" configuration.
Long in the back, short in the front.
Now, if there were any spare AXSR handguards in stock to chop down…
Last edited:
Been a while since I’ve seen one of them.
Attachments
To make up for the lack of AI pics in my previous two posts.
What caliber are you shooting there with your axsr? Are you shooting matches with it?
That’s the one true caliber in the one true color. 308.
Yep, been running matches since March with it. I was bouncing between 6.5cm and 308 all year but in 2024 I’m just going to run 175gr 308.
2024 Steel Safari and Team Safari though will be done with 6.5CM and NF ELR will be 300PRC.
In 2025 I’ll jump over to 6.5cm.
I love this rifle.
Donated to Maggie's wigs for kids almost a year ago
New AI AT owner here...
What is the interoperability of parts between the AICS Rem 700 chassis and the AI AT?
If I purchase an AICS Rem 700 SA chassis can I then take the folding hinge and stock sides and change them with my AI AT fixed stock?
Thanks
What is the interoperability of parts between the AICS Rem 700 chassis and the AI AT?
If I purchase an AICS Rem 700 SA chassis can I then take the folding hinge and stock sides and change them with my AI AT fixed stock?
Thanks
