• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. C

    .300 Norma Magnum

    Re: .300 Norma Magnum If you want to know about the norma mag rounds Have None from this board is the brain child behind them and developed the rounds.
  2. C

    Xtreme Long Range rig photo's

    Re: Xtreme Long Range rig photo's Its not so much knowing your weapon as it is knowing the conditions and enviroment your shooting in.
  3. C

    Hunting & Fishing Ohio Whitetail Hunt ??

    Re: Ohio Whitetail Hunt ?? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cut rifled</div><div class="ubbcode-body">jeffbird, I all ready know all of that I have a lease in Buffalo and Trempealeau county WI but the Ohio gun season starts the Monday after ours...
  4. C

    30-338lap ?

    Re: 30-338lap ? With VV560 and a 210JLK, 80gn will get you to 60,800psi and a 93% case fill depending on the seating depth. Call Bobby Lawton I know he's played around with that cartridge a little.
  5. C

    Press rings

    Re: Press rings Or you can use some lapping compound. Chuck up the seater stem in a drill and use the lapping compound on the bullets.
  6. C

    Lapua .308 headstamp: "Lapua .308 07 02" ?

    Re: Lapua .308 headstamp: "Lapua .308 07 02" ? Year and lot # are what you see. I have some IMI(TZZ) BMG brass like it.
  7. C

    best bullet for 1000yds with 300 WSM

    Re: best bullet for 1000yds with 300 WSM Out to 1000 I'd shoot 187bibs over anything else available.
  8. C

    Xtreme Long Range rig photo's

    Re: Xtreme Long Range rig photo's Later got any spare mags?? LOL
  9. C

    Opinions wanted for the most effective .338 brake?

    Re: Opinions wanted for the most effective .338 br APA FB
  10. C

    50BMG for 3/8" AR500?

    Re: 50BMG for 3/8" AR500? If its on chains and if you don't mind if it starts to cup it. Also no ap stuff. For 400 meters and closer I'd apt for 5/8 or thicker ar500.
  11. C

    Lehigh 50 BMG bullets.

    Re: Lehigh 50 BMG bullets. Basically the designs are the same as lehigh 808's hears a link http://www.tenxbullets.com/specs.html
  12. C

    What BMG for LR ?

    Re: What BMG for LR ? Yes jimmy, a few shooters could and would hit that rock LOL. There are some 900 to 1200 grain bullets out there but you really need a different case than a bmg. There were a couple guys that screwed around with a bmg improved fully blown out with a very short neck and...
  13. C

    What BMG for LR ?

    Re: What BMG for LR ? your bmg with amaxs will run out of steam at around 1900 yards. If your going to go further start looking elsewhere, there are better options which are cheaper. The price of factory BMG's these days, IMO our better off going a full custom build.
  14. C

    Lehigh 50 BMG bullets.

    Re: Lehigh 50 BMG bullets. I've ran 10x 795gn bullets in my windrunner.
  15. C

    Cheytac's M200 bipod setup

    Re: Cheytac's M200 bipod setup later On a 50 platform?? It looks like its built like a tank.
  16. C

    .416 barrel, SS?

    Re: .416 barrel, SS? Either steel will work fine with a brass projectile.
  17. C

    Got Some Berger 338 300 grain bullets!!

    Re: Got Some Berger 338 300 grain bullets!! Dave those 187's kick ass for 1000 target shooting.
  18. C

    Dilema with the Cheytac system Need advice.

    Re: Dilema with the Cheytac system Need advice. Be careful with us869 and bmg's theirs good reason that some commercial re-loaders are hovering around 238gn when using 750gn bullets.
  19. C

    375 for your windrunner!

    Re: 375 for your windrunner! I've talked to randy dierks about doing putting a 375 barrel on my windrunner and he can. I have my 375 reamers + guages sitting there now. I have some 375 barrels in the safe but I think I'm just going to put them on my bat action. If you call bill he'll give you...
  20. C

    375 for your windrunner!

    Re: 375 for your windrunner! Very true RT51. He always nice to talk to and he stands behind his guns and does what it takes to make it right.
Top Bottom
Back
Home
Forums
Merch
Alerts