Search results

not

no pic of wound sorry nothing special hole in hole out thru the ribs behind shoulders it did expand.

Got my goat not a big one had 1 day to hunt and was trying to get one at long range. Was hoping for 1000yds but of course the wind was gusting to 15mph so I decided not to push it too much. so... 300RSAUM built myself Nikon monarch 5-20x 208gr amax 742 yards one shot he went about...

I have 5 or 6 reloads on some of it and no issues. I guess I will just have to keep it separate, which does suck because I have a ton fired from factory rifle and not nearly enough for the other two. I thought about tearing one down and giving it another .001 or .002 to see if that would work...

same set of dies for all three RCBS fl sizer dies. I know the factory rifle has a shall we call it "generous" chamber but once its resized and refired it should be chamber sized correct? Or is the factory chamber so loose that the brass is toast somehow. Reloads from the factory rifle in the...

So I have a 300SAUM well 3 actually 2 that I built and a factory Remington. If I take a brass from the Remington and resize it it will chamber up just fine in the other 2 rifles but once fired extraction involves a rubber mallet in either rifle I built. My question is are my chambers too...

I did both a rim on the back and I threaded the inside of the choke and outside of insert so its locked in from both ends. It shoots good enough I might make a 22 mag and a hornet insert for it. I thought about doing the mono-block thing but I still have a ton of 44 stuff to shoot up! and your...

So I had the day off again... oilfield, feast or famine I guess. Anyhow I have a contender with a couple barrels, one of them was a 44mag hotshot barrel with the screw in choke. So as a 44 its ok minute of paper plate it has killed deer, but never really thrilled me. So I've been wanting a...

I waited on a rifle once for over a year, told myself it couldn't be rocket science, convinced the wife i'd be saving money in the long run (yeah right). Bought a grizzly lathe and a mini mill, never used either ever, bought a little metal to practice on, now 15-20 rifles , a dozen or so muzzle...

we've done it a few times its not really to hard but there is a learning curve, depending on the pattern and how picky you are because there will always be a seam somewhere but for the most part its not rocket science.

Re: 300 win mag <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TOPGuN050</div><div class="ubbcode-body">the 195s are probably gonna be what i go with i shot my 150s today and i am starting to get key holes very very bad and thats at only 100yds so i am promptly...

Re: Tumbling Loaded Ammunition a bunch of 223 rounds loaded by us sat around a few years some were getting tarnished. Threw them all in a tumbler to clean em up, loaded with H335 25 gr. 55gg fmj. over half of them were WAYYY over pressure! Can't say for sure why but thats the same load and...

Re: Replacement Barrel Contour... I see a rem varmit contour under sporters last one in the chart measure your barrel to make sure the muzzle should be around .830' according to the chart

Re: Your farthest hits ever? not my farthest but 2 of 4 at 1450yds with another members 7saum first time ever behind the gun should have been 3of4 but it was cold out and my numb finger and that 2oz trigger weren't use to each other

Re: My local Pawn Shop is full of stupid. You guys find DEALS at pawnshops? The pawnshops here are HORRIBLE you can buy any POS beat up broken or halfway decent used rifle there cheaper brand spanking new at walmart or the sporting goods stores in town. All the gun related stuff is like that.

Re: $50 Hillbilly Gun Oven I made one almost exactly like this only I use a heat gun instead of the hot plate Just put heat gun in thru hole in the bottom small exhaust hole at the top. It works really well. I never thought about a hot plate I guess I assumed the circulation would help.

Re: Chrome Moly or SS well I know your gonna wear them both out. You should just give me one and I'll keep it safe for ya. Have you seen any real accuracy differences between CM or SS? I know your getting wayyy more trigger time than me, just wondered if you can see any real advantage...

Re: One Powder for One Caliber - YOUR PICKS* Varget IMR 4831 Blue dot 223-300wm 38/357 44 45 shotguns not the best choices for each caliber but 10 calibers 30 some guns wayyy easier to keep 3 powders in stock

Re: Define accuracy So I know group shooting is considered bad for some reason, but it's really the only way to measure the repeatability of a system. I know, dot drills, but its the same thing only you use a different poa each time. They both test shooter error and equipment. I know that if...

Re: Variable Wind one area we shoot the wind at the gun is almost always opposite of what you should shoot because of the terrain it is really hard to accept that here the wind is 3oclock at the target its 3oclock but everywhere in between its 9oclock. Totally a terrain induced illusion gets...